YetiForceCompany/YetiForceCRM

UnusedFormalParameter

Since: 0.2

Avoid passing parameters to methods or constructors and then not using those parameters.

Example

class Foo
{
    private function bar($howdy)
    {
        // $howdy is not used
    }
}

Source https://phpmd.org/rules/unusedcode.html#unusedformalparameter

Most of the time a block of code is empty when a piece of code is really missing. So such empty block must be either filled or removed.

Noncompliant Code Example

for ($i = 0; $i < 42; $i++){}  // Empty on purpose or missing piece of code ?

Exceptions

When a block contains a comment, this block is not considered to be empty.

Most of the time a block of code is empty when a piece of code is really missing. So such empty block must be either filled or removed.

Noncompliant Code Example

for ($i = 0; $i < 42; $i++){}  // Empty on purpose or missing piece of code ?

Exceptions

When a block contains a comment, this block is not considered to be empty.

Most of the time a block of code is empty when a piece of code is really missing. So such empty block must be either filled or removed.

Noncompliant Code Example

for ($i = 0; $i < 42; $i++){}  // Empty on purpose or missing piece of code ?

Exceptions

When a block contains a comment, this block is not considered to be empty.

Having two cases in a switch statement or two branches in an if chain with the same implementation is at best duplicate code, and at worst a coding error. If the same logic is truly needed for both instances, then in an if chain they should be combined, or for a switch, one should fall through to the other.

Noncompliant Code Example

switch ($i) {
  case 1:
    doSomething();
    break;
  case 2:
    doSomethingDifferent();
    break;
  case 3:  // Noncompliant; duplicates case 1's implementation
    doSomething();
    break;
  default:
    doTheRest();
}

if ($a >= 0 && $a < 10) {
  doTheThing();
else if ($a >= 10 && $a < 20) {
  doTheOtherThing();
}
else if ($a >= 20 && $a < 50) {
  doTheThing();  // Noncompliant; duplicates first condition
}
else {
  doTheRest();
}

if ($b == 0) {
  doOneMoreThing();
}
else {
  doOneMoreThing(); // Noncompliant; duplicates then-branch
}

var b = a ? 12 > 4 : 4;  // Noncompliant; always results in the same value

Compliant Solution

switch ($i) {
  case 1:
  case 3:
    doSomething();
    break;
  case 2:
    doSomethingDifferent();
    break;
  default:
    doTheRest();
}

if (($a >= 0 && $a < 10) || ($a >= 20 && $a < 50)) {
  doTheThing();
else if ($a >= 10 && $a < 20) {
  doTheOtherThing();
}
else {
  doTheRest();
}

doOneMoreThing();

b = 4;

or

switch ($i) {
  case 1:
    doSomething();
    break;
  case 2:
    doSomethingDifferent();
    break;
  case 3:
    doThirdThing();
    break;
  default:
    doTheRest();
}

if ($a >= 0 && $a < 10) {
  doTheThing();
else if ($a >= 10 && $a < 20) {
  doTheOtherThing();
}
else if ($a >= 20 && $a < 50) {
  doTheThirdThing();
}
else {
  doTheRest();
}

if ($b == 0) {
  doOneMoreThing();
}
else {
  doTheRest();
}

int b = a ? 12 > 4 : 8;

Exceptions

Blocks in an if chain that contain a single line of code are ignored, as are blocks in a switch statement that contain a single line of code with or without a following break.

Most of the time a block of code is empty when a piece of code is really missing. So such empty block must be either filled or removed.

Noncompliant Code Example

for ($i = 0; $i < 42; $i++){}  // Empty on purpose or missing piece of code ?

Exceptions

When a block contains a comment, this block is not considered to be empty.

Most of the time a block of code is empty when a piece of code is really missing. So such empty block must be either filled or removed.

Noncompliant Code Example

for ($i = 0; $i < 42; $i++){}  // Empty on purpose or missing piece of code ?

Exceptions

When a block contains a comment, this block is not considered to be empty.

Having two cases in a switch statement or two branches in an if chain with the same implementation is at best duplicate code, and at worst a coding error. If the same logic is truly needed for both instances, then in an if chain they should be combined, or for a switch, one should fall through to the other.

Noncompliant Code Example

switch ($i) {
  case 1:
    doSomething();
    break;
  case 2:
    doSomethingDifferent();
    break;
  case 3:  // Noncompliant; duplicates case 1's implementation
    doSomething();
    break;
  default:
    doTheRest();
}

if ($a >= 0 && $a < 10) {
  doTheThing();
else if ($a >= 10 && $a < 20) {
  doTheOtherThing();
}
else if ($a >= 20 && $a < 50) {
  doTheThing();  // Noncompliant; duplicates first condition
}
else {
  doTheRest();
}

if ($b == 0) {
  doOneMoreThing();
}
else {
  doOneMoreThing(); // Noncompliant; duplicates then-branch
}

var b = a ? 12 > 4 : 4;  // Noncompliant; always results in the same value

Compliant Solution

switch ($i) {
  case 1:
  case 3:
    doSomething();
    break;
  case 2:
    doSomethingDifferent();
    break;
  default:
    doTheRest();
}

if (($a >= 0 && $a < 10) || ($a >= 20 && $a < 50)) {
  doTheThing();
else if ($a >= 10 && $a < 20) {
  doTheOtherThing();
}
else {
  doTheRest();
}

doOneMoreThing();

b = 4;

or

switch ($i) {
  case 1:
    doSomething();
    break;
  case 2:
    doSomethingDifferent();
    break;
  case 3:
    doThirdThing();
    break;
  default:
    doTheRest();
}

if ($a >= 0 && $a < 10) {
  doTheThing();
else if ($a >= 10 && $a < 20) {
  doTheOtherThing();
}
else if ($a >= 20 && $a < 50) {
  doTheThirdThing();
}
else {
  doTheRest();
}

if ($b == 0) {
  doOneMoreThing();
}
else {
  doTheRest();
}

int b = a ? 12 > 4 : 8;

Exceptions

Blocks in an if chain that contain a single line of code are ignored, as are blocks in a switch statement that contain a single line of code with or without a following break.

Having two cases in a switch statement or two branches in an if chain with the same implementation is at best duplicate code, and at worst a coding error. If the same logic is truly needed for both instances, then in an if chain they should be combined, or for a switch, one should fall through to the other.

Noncompliant Code Example

switch ($i) {
  case 1:
    doSomething();
    break;
  case 2:
    doSomethingDifferent();
    break;
  case 3:  // Noncompliant; duplicates case 1's implementation
    doSomething();
    break;
  default:
    doTheRest();
}

if ($a >= 0 && $a < 10) {
  doTheThing();
else if ($a >= 10 && $a < 20) {
  doTheOtherThing();
}
else if ($a >= 20 && $a < 50) {
  doTheThing();  // Noncompliant; duplicates first condition
}
else {
  doTheRest();
}

if ($b == 0) {
  doOneMoreThing();
}
else {
  doOneMoreThing(); // Noncompliant; duplicates then-branch
}

var b = a ? 12 > 4 : 4;  // Noncompliant; always results in the same value

Compliant Solution

switch ($i) {
  case 1:
  case 3:
    doSomething();
    break;
  case 2:
    doSomethingDifferent();
    break;
  default:
    doTheRest();
}

if (($a >= 0 && $a < 10) || ($a >= 20 && $a < 50)) {
  doTheThing();
else if ($a >= 10 && $a < 20) {
  doTheOtherThing();
}
else {
  doTheRest();
}

doOneMoreThing();

b = 4;

or

switch ($i) {
  case 1:
    doSomething();
    break;
  case 2:
    doSomethingDifferent();
    break;
  case 3:
    doThirdThing();
    break;
  default:
    doTheRest();
}

if ($a >= 0 && $a < 10) {
  doTheThing();
else if ($a >= 10 && $a < 20) {
  doTheOtherThing();
}
else if ($a >= 20 && $a < 50) {
  doTheThirdThing();
}
else {
  doTheRest();
}

if ($b == 0) {
  doOneMoreThing();
}
else {
  doTheRest();
}

int b = a ? 12 > 4 : 8;

Exceptions

Blocks in an if chain that contain a single line of code are ignored, as are blocks in a switch statement that contain a single line of code with or without a following break.

Having two cases in a switch statement or two branches in an if chain with the same implementation is at best duplicate code, and at worst a coding error. If the same logic is truly needed for both instances, then in an if chain they should be combined, or for a switch, one should fall through to the other.

Noncompliant Code Example

switch ($i) {
  case 1:
    doSomething();
    break;
  case 2:
    doSomethingDifferent();
    break;
  case 3:  // Noncompliant; duplicates case 1's implementation
    doSomething();
    break;
  default:
    doTheRest();
}

if ($a >= 0 && $a < 10) {
  doTheThing();
else if ($a >= 10 && $a < 20) {
  doTheOtherThing();
}
else if ($a >= 20 && $a < 50) {
  doTheThing();  // Noncompliant; duplicates first condition
}
else {
  doTheRest();
}

if ($b == 0) {
  doOneMoreThing();
}
else {
  doOneMoreThing(); // Noncompliant; duplicates then-branch
}

var b = a ? 12 > 4 : 4;  // Noncompliant; always results in the same value

Compliant Solution

switch ($i) {
  case 1:
  case 3:
    doSomething();
    break;
  case 2:
    doSomethingDifferent();
    break;
  default:
    doTheRest();
}

if (($a >= 0 && $a < 10) || ($a >= 20 && $a < 50)) {
  doTheThing();
else if ($a >= 10 && $a < 20) {
  doTheOtherThing();
}
else {
  doTheRest();
}

doOneMoreThing();

b = 4;

or

switch ($i) {
  case 1:
    doSomething();
    break;
  case 2:
    doSomethingDifferent();
    break;
  case 3:
    doThirdThing();
    break;
  default:
    doTheRest();
}

if ($a >= 0 && $a < 10) {
  doTheThing();
else if ($a >= 10 && $a < 20) {
  doTheOtherThing();
}
else if ($a >= 20 && $a < 50) {
  doTheThirdThing();
}
else {
  doTheRest();
}

if ($b == 0) {
  doOneMoreThing();
}
else {
  doTheRest();
}

int b = a ? 12 > 4 : 8;

Exceptions

Blocks in an if chain that contain a single line of code are ignored, as are blocks in a switch statement that contain a single line of code with or without a following break.

Duplicated string literals make the process of refactoring error-prone, since you must be sure to update all occurrences.

On the other hand, constants can be referenced from many places, but only need to be updated in a single place.

Noncompliant Code Example

With the default threshold of 3:

function run() {
  prepare('action1');                              // Non-Compliant - 'action1' is duplicated 3 times
  execute('action1');
  release('action1');
}

Compliant Solution

ACTION_1 = 'action1';

function run() {
  prepare(ACTION_1);
  execute(ACTION_1);
  release(ACTION_1);
}

Exceptions

To prevent generating some false-positives, literals having less than 5 characters are excluded.

Duplicated string literals make the process of refactoring error-prone, since you must be sure to update all occurrences.

On the other hand, constants can be referenced from many places, but only need to be updated in a single place.

Noncompliant Code Example

With the default threshold of 3:

function run() {
  prepare('action1');                              // Non-Compliant - 'action1' is duplicated 3 times
  execute('action1');
  release('action1');
}

Compliant Solution

ACTION_1 = 'action1';

function run() {
  prepare(ACTION_1);
  execute(ACTION_1);
  release(ACTION_1);
}

Exceptions

To prevent generating some false-positives, literals having less than 5 characters are excluded.

Duplicated string literals make the process of refactoring error-prone, since you must be sure to update all occurrences.

On the other hand, constants can be referenced from many places, but only need to be updated in a single place.

Noncompliant Code Example

With the default threshold of 3:

function run() {
  prepare('action1');                              // Non-Compliant - 'action1' is duplicated 3 times
  execute('action1');
  release('action1');
}

Compliant Solution

ACTION_1 = 'action1';

function run() {
  prepare(ACTION_1);
  execute(ACTION_1);
  release(ACTION_1);
}

Exceptions

To prevent generating some false-positives, literals having less than 5 characters are excluded.

Duplicated string literals make the process of refactoring error-prone, since you must be sure to update all occurrences.

On the other hand, constants can be referenced from many places, but only need to be updated in a single place.

Noncompliant Code Example

With the default threshold of 3:

function run() {
  prepare('action1');                              // Non-Compliant - 'action1' is duplicated 3 times
  execute('action1');
  release('action1');
}

Compliant Solution

ACTION_1 = 'action1';

function run() {
  prepare(ACTION_1);
  execute(ACTION_1);
  release(ACTION_1);
}

Exceptions

To prevent generating some false-positives, literals having less than 5 characters are excluded.

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 217.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

LongVariable

Since: 0.2

Detects when a field, formal or local variable is declared with a long name.

Example

class Something {
    protected $reallyLongIntName = -3; // VIOLATION - Field
    public static function main( array $interestingArgumentsList[] ) { // VIOLATION - Formal
        $otherReallyLongName = -5; // VIOLATION - Local
        for ($interestingIntIndex = 0; // VIOLATION - For
             $interestingIntIndex < 10;
             $interestingIntIndex++ ) {
        }
    }
}

Source https://phpmd.org/rules/naming.html#longvariable

CamelCasePropertyName

Since: 0.2

It is considered best practice to use the camelCase notation to name attributes.

Example

class ClassName {
    protected $property_name;
}

Source

CamelCasePropertyName

Since: 0.2

It is considered best practice to use the camelCase notation to name attributes.

Example

class ClassName {
    protected $property_name;
}

Source

CamelCasePropertyName

Since: 0.2

It is considered best practice to use the camelCase notation to name attributes.

Example

class ClassName {
    protected $property_name;
}

Source

CamelCasePropertyName

Since: 0.2

It is considered best practice to use the camelCase notation to name attributes.

Example

class ClassName {
    protected $property_name;
}

Source

CamelCasePropertyName

Since: 0.2

It is considered best practice to use the camelCase notation to name attributes.

Example

class ClassName {
    protected $property_name;
}

Source

CamelCasePropertyName

Since: 0.2

It is considered best practice to use the camelCase notation to name attributes.

Example

class ClassName {
    protected $property_name;
}

Source

CamelCasePropertyName

Since: 0.2

It is considered best practice to use the camelCase notation to name attributes.

Example

class ClassName {
    protected $property_name;
}

Source

CamelCasePropertyName

Since: 0.2

It is considered best practice to use the camelCase notation to name attributes.

Example

class ClassName {
    protected $property_name;
}

Source

CamelCasePropertyName

Since: 0.2

It is considered best practice to use the camelCase notation to name attributes.

Example

class ClassName {
    protected $property_name;
}

Source

CamelCasePropertyName

Since: 0.2

It is considered best practice to use the camelCase notation to name attributes.

Example

class ClassName {
    protected $property_name;
}

Source

CamelCasePropertyName

Since: 0.2

It is considered best practice to use the camelCase notation to name attributes.

Example

class ClassName {
    protected $property_name;
}

Source

CamelCasePropertyName

Since: 0.2

It is considered best practice to use the camelCase notation to name attributes.

Example

class ClassName {
    protected $property_name;
}

Source

CamelCasePropertyName

Since: 0.2

It is considered best practice to use the camelCase notation to name attributes.

Example

class ClassName {
    protected $property_name;
}

Source