MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD029 - Ordered list item prefix

Tags: ol

Aliases: ol-prefix

Parameters: style ("one", "ordered"; default "one")

This rule is triggered on ordered lists that do not either start with '1.' or do not have a prefix that increases in numerical order (depending on the configured style, which defaults to 'one').

Example valid list if the style is configured as 'one':

1. Do this.
1. Do that.
1. Done.

Example valid list if the style is configured as 'ordered':

1. Do this.
2. Do that.
3. Done.

MD010 - Hard tabs

Tags: whitespace, hard_tab

Aliases: no-hard-tabs

This rule is triggered by any lines that contain hard tab characters instead of using spaces for indentation. To fix this, replace any hard tab characters with spaces instead.

Example:

Some text

    * hard tab character used to indent the list item

Corrected example:

Some text

    * Spaces used to indent the list item instead

MD010 - Hard tabs

Tags: whitespace, hard_tab

Aliases: no-hard-tabs

This rule is triggered by any lines that contain hard tab characters instead of using spaces for indentation. To fix this, replace any hard tab characters with spaces instead.

Example:

Some text

    * hard tab character used to indent the list item

Corrected example:

Some text

    * Spaces used to indent the list item instead

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD033 - Inline HTML

Tags: html

Aliases: no-inline-html

This rule is triggered whenever raw HTML is used in a markdown document:

Inline HTML header

To fix this, use 'pure' markdown instead of including raw HTML:

# Markdown header

Rationale: Raw HTML is allowed in markdown, but this rule is included for those who want their documents to only include "pure" markdown, or for those who are rendering markdown documents in something other than HTML.

MD033 - Inline HTML

Tags: html

Aliases: no-inline-html

This rule is triggered whenever raw HTML is used in a markdown document:

Inline HTML header

To fix this, use 'pure' markdown instead of including raw HTML:

# Markdown header

Rationale: Raw HTML is allowed in markdown, but this rule is included for those who want their documents to only include "pure" markdown, or for those who are rendering markdown documents in something other than HTML.

MD033 - Inline HTML

Tags: html

Aliases: no-inline-html

This rule is triggered whenever raw HTML is used in a markdown document:

Inline HTML header

To fix this, use 'pure' markdown instead of including raw HTML:

# Markdown header

Rationale: Raw HTML is allowed in markdown, but this rule is included for those who want their documents to only include "pure" markdown, or for those who are rendering markdown documents in something other than HTML.

MD033 - Inline HTML

Tags: html

Aliases: no-inline-html

This rule is triggered whenever raw HTML is used in a markdown document:

Inline HTML header

To fix this, use 'pure' markdown instead of including raw HTML:

# Markdown header

Rationale: Raw HTML is allowed in markdown, but this rule is included for those who want their documents to only include "pure" markdown, or for those who are rendering markdown documents in something other than HTML.

MD030 - Spaces after list markers

Tags: ol, ul, whitespace

Aliases: list-marker-space

Parameters: ulsingle, olsingle, ulmulti, olmulti (number, default 1)

This rule checks for the number of spaces between a list marker (e.g. '-', '*', '+' or '1.') and the text of the list item.

The number of spaces checked for depends on the document style in use, but the default is 1 space after any list marker:

* Foo
* Bar
* Baz

1. Foo
1. Bar
1. Baz

1. Foo
   * Bar
1. Baz

A document style may change the number of spaces after unordered list items and ordered list items independently, as well as based on whether the content of every item in the list consists of a single paragraph, or multiple paragraphs (including sub-lists and code blocks).

For example, the style guide at http://www.cirosantilli.com/markdown-styleguide/#spaces-after-marker specifies that 1 space after the list marker should be used if every item in the list fits within a single paragraph, but to use 2 or 3 spaces (for ordered and unordered lists respectively) if there are multiple paragraphs of content inside the list:

* Foo
* Bar
* Baz

vs.

*   Foo

    Second paragraph

*   Bar

or

1.  Foo

    Second paragraph

1.  Bar

To fix this, ensure the correct number of spaces are used after list marker for your selected document style.

MD029 - Ordered list item prefix

Tags: ol

Aliases: ol-prefix

Parameters: style ("one", "ordered"; default "one")

This rule is triggered on ordered lists that do not either start with '1.' or do not have a prefix that increases in numerical order (depending on the configured style, which defaults to 'one').

Example valid list if the style is configured as 'one':

1. Do this.
1. Do that.
1. Done.

Example valid list if the style is configured as 'ordered':

1. Do this.
2. Do that.
3. Done.

MD030 - Spaces after list markers

Tags: ol, ul, whitespace

Aliases: list-marker-space

Parameters: ulsingle, olsingle, ulmulti, olmulti (number, default 1)

This rule checks for the number of spaces between a list marker (e.g. '-', '*', '+' or '1.') and the text of the list item.

The number of spaces checked for depends on the document style in use, but the default is 1 space after any list marker:

* Foo
* Bar
* Baz

1. Foo
1. Bar
1. Baz

1. Foo
   * Bar
1. Baz

A document style may change the number of spaces after unordered list items and ordered list items independently, as well as based on whether the content of every item in the list consists of a single paragraph, or multiple paragraphs (including sub-lists and code blocks).

For example, the style guide at http://www.cirosantilli.com/markdown-styleguide/#spaces-after-marker specifies that 1 space after the list marker should be used if every item in the list fits within a single paragraph, but to use 2 or 3 spaces (for ordered and unordered lists respectively) if there are multiple paragraphs of content inside the list:

* Foo
* Bar
* Baz

vs.

*   Foo

    Second paragraph

*   Bar

or

1.  Foo

    Second paragraph

1.  Bar

To fix this, ensure the correct number of spaces are used after list marker for your selected document style.

Not following: (error message here)

Reasons include: file not found, no permissions, not included on the command line, not allowing shellcheck to follow files with -x, etc.

Problematic code:

source somefile

Correct code:

# shellcheck disable=SC1091
source somefile

Rationale:

ShellCheck, for whichever reason, is not able to access the source file.

This could be because you did not include it on the command line, did not use shellcheck -x to allow following other files, don't have permissions or a variety of other problems.

Feel free to ignore the error with a [[directive]].

Exceptions:

If you're fine with it, ignore the message with a [[directive]].

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

MD030 - Spaces after list markers

Tags: ol, ul, whitespace

Aliases: list-marker-space

Parameters: ulsingle, olsingle, ulmulti, olmulti (number, default 1)

This rule checks for the number of spaces between a list marker (e.g. '-', '*', '+' or '1.') and the text of the list item.

The number of spaces checked for depends on the document style in use, but the default is 1 space after any list marker:

* Foo
* Bar
* Baz

1. Foo
1. Bar
1. Baz

1. Foo
   * Bar
1. Baz

A document style may change the number of spaces after unordered list items and ordered list items independently, as well as based on whether the content of every item in the list consists of a single paragraph, or multiple paragraphs (including sub-lists and code blocks).

For example, the style guide at http://www.cirosantilli.com/markdown-styleguide/#spaces-after-marker specifies that 1 space after the list marker should be used if every item in the list fits within a single paragraph, but to use 2 or 3 spaces (for ordered and unordered lists respectively) if there are multiple paragraphs of content inside the list:

* Foo
* Bar
* Baz

vs.

*   Foo

    Second paragraph

*   Bar

or

1.  Foo

    Second paragraph

1.  Bar

To fix this, ensure the correct number of spaces are used after list marker for your selected document style.

MD030 - Spaces after list markers

Tags: ol, ul, whitespace

Aliases: list-marker-space

Parameters: ulsingle, olsingle, ulmulti, olmulti (number, default 1)

This rule checks for the number of spaces between a list marker (e.g. '-', '*', '+' or '1.') and the text of the list item.

The number of spaces checked for depends on the document style in use, but the default is 1 space after any list marker:

* Foo
* Bar
* Baz

1. Foo
1. Bar
1. Baz

1. Foo
   * Bar
1. Baz

A document style may change the number of spaces after unordered list items and ordered list items independently, as well as based on whether the content of every item in the list consists of a single paragraph, or multiple paragraphs (including sub-lists and code blocks).

For example, the style guide at http://www.cirosantilli.com/markdown-styleguide/#spaces-after-marker specifies that 1 space after the list marker should be used if every item in the list fits within a single paragraph, but to use 2 or 3 spaces (for ordered and unordered lists respectively) if there are multiple paragraphs of content inside the list:

* Foo
* Bar
* Baz

vs.

*   Foo

    Second paragraph

*   Bar

or

1.  Foo

    Second paragraph

1.  Bar

To fix this, ensure the correct number of spaces are used after list marker for your selected document style.

MD030 - Spaces after list markers

Tags: ol, ul, whitespace

Aliases: list-marker-space

Parameters: ulsingle, olsingle, ulmulti, olmulti (number, default 1)

This rule checks for the number of spaces between a list marker (e.g. '-', '*', '+' or '1.') and the text of the list item.

The number of spaces checked for depends on the document style in use, but the default is 1 space after any list marker:

* Foo
* Bar
* Baz

1. Foo
1. Bar
1. Baz

1. Foo
   * Bar
1. Baz

A document style may change the number of spaces after unordered list items and ordered list items independently, as well as based on whether the content of every item in the list consists of a single paragraph, or multiple paragraphs (including sub-lists and code blocks).

For example, the style guide at http://www.cirosantilli.com/markdown-styleguide/#spaces-after-marker specifies that 1 space after the list marker should be used if every item in the list fits within a single paragraph, but to use 2 or 3 spaces (for ordered and unordered lists respectively) if there are multiple paragraphs of content inside the list:

* Foo
* Bar
* Baz

vs.

*   Foo

    Second paragraph

*   Bar

or

1.  Foo

    Second paragraph

1.  Bar

To fix this, ensure the correct number of spaces are used after list marker for your selected document style.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD030 - Spaces after list markers

Tags: ol, ul, whitespace

Aliases: list-marker-space

Parameters: ulsingle, olsingle, ulmulti, olmulti (number, default 1)

This rule checks for the number of spaces between a list marker (e.g. '-', '*', '+' or '1.') and the text of the list item.

The number of spaces checked for depends on the document style in use, but the default is 1 space after any list marker:

* Foo
* Bar
* Baz

1. Foo
1. Bar
1. Baz

1. Foo
   * Bar
1. Baz

A document style may change the number of spaces after unordered list items and ordered list items independently, as well as based on whether the content of every item in the list consists of a single paragraph, or multiple paragraphs (including sub-lists and code blocks).

For example, the style guide at http://www.cirosantilli.com/markdown-styleguide/#spaces-after-marker specifies that 1 space after the list marker should be used if every item in the list fits within a single paragraph, but to use 2 or 3 spaces (for ordered and unordered lists respectively) if there are multiple paragraphs of content inside the list:

* Foo
* Bar
* Baz

vs.

*   Foo

    Second paragraph

*   Bar

or

1.  Foo

    Second paragraph

1.  Bar

To fix this, ensure the correct number of spaces are used after list marker for your selected document style.