Showing 22 of 22 total issues
Can't follow non-constant source. Use a directive to specify location. Open
[ -s "$NVM_DIR/nvm.sh" ] && \. "$NVM_DIR/nvm.sh" # This loads nvm
- Read upRead up
- Exclude checks
Can't follow non-constant source. Use a directive to specify location.
Problematic code:
. "$(find_install_dir)/lib.sh"
Correct code:
# shellcheck source=src/lib.sh
. "$(find_install_dir)/lib.sh"
Rationale:
ShellCheck is not able to include sourced files from paths that are determined at runtime. The file will not be read, potentially resulting in warnings about unassigned variables and similar.
Use a [[Directive]] to point shellcheck to a fixed location it can read instead.
Exceptions:
If you don't care that ShellCheck is unable to account for the file, specify # shellcheck source=/dev/null
.
Notice
Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.
Can't follow non-constant source. Use a directive to specify location. Open
source "$HOME/.dotfiles/files/completion/npx-completion.sh"
- Read upRead up
- Exclude checks
Can't follow non-constant source. Use a directive to specify location.
Problematic code:
. "$(find_install_dir)/lib.sh"
Correct code:
# shellcheck source=src/lib.sh
. "$(find_install_dir)/lib.sh"
Rationale:
ShellCheck is not able to include sourced files from paths that are determined at runtime. The file will not be read, potentially resulting in warnings about unassigned variables and similar.
Use a [[Directive]] to point shellcheck to a fixed location it can read instead.
Exceptions:
If you don't care that ShellCheck is unable to account for the file, specify # shellcheck source=/dev/null
.
Notice
Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.
Can't follow non-constant source. Use a directive to specify location. Open
source ~/.ssh/other/github.sh
- Read upRead up
- Exclude checks
Can't follow non-constant source. Use a directive to specify location.
Problematic code:
. "$(find_install_dir)/lib.sh"
Correct code:
# shellcheck source=src/lib.sh
. "$(find_install_dir)/lib.sh"
Rationale:
ShellCheck is not able to include sourced files from paths that are determined at runtime. The file will not be read, potentially resulting in warnings about unassigned variables and similar.
Use a [[Directive]] to point shellcheck to a fixed location it can read instead.
Exceptions:
If you don't care that ShellCheck is unable to account for the file, specify # shellcheck source=/dev/null
.
Notice
Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.
Can't follow non-constant source. Use a directive to specify location. Open
[ -s "$NVM_DIR/bash_completion" ] && \. "$NVM_DIR/bash_completion" # This loads nvm bash_completion
- Read upRead up
- Exclude checks
Can't follow non-constant source. Use a directive to specify location.
Problematic code:
. "$(find_install_dir)/lib.sh"
Correct code:
# shellcheck source=src/lib.sh
. "$(find_install_dir)/lib.sh"
Rationale:
ShellCheck is not able to include sourced files from paths that are determined at runtime. The file will not be read, potentially resulting in warnings about unassigned variables and similar.
Use a [[Directive]] to point shellcheck to a fixed location it can read instead.
Exceptions:
If you don't care that ShellCheck is unable to account for the file, specify # shellcheck source=/dev/null
.
Notice
Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.
Can't follow non-constant source. Use a directive to specify location. Open
source "$HOME/.dotfiles/files/completion/django-completion.sh"
- Read upRead up
- Exclude checks
Can't follow non-constant source. Use a directive to specify location.
Problematic code:
. "$(find_install_dir)/lib.sh"
Correct code:
# shellcheck source=src/lib.sh
. "$(find_install_dir)/lib.sh"
Rationale:
ShellCheck is not able to include sourced files from paths that are determined at runtime. The file will not be read, potentially resulting in warnings about unassigned variables and similar.
Use a [[Directive]] to point shellcheck to a fixed location it can read instead.
Exceptions:
If you don't care that ShellCheck is unable to account for the file, specify # shellcheck source=/dev/null
.
Notice
Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.
Not following: /usr/local/bin/virtualenvwrapper_lazy.sh: openFile: does not exist (No such file or directory) Open
[ -s "/usr/local/bin/virtualenvwrapper_lazy.sh" ] && . /usr/local/bin/virtualenvwrapper_lazy.sh
- Read upRead up
- Exclude checks
Not following: (error message here)
Reasons include: file not found, no permissions, not included on the command line, not allowing shellcheck
to follow files with -x
, etc.
Problematic code:
source somefile
Correct code:
# shellcheck disable=SC1091
source somefile
Rationale:
ShellCheck, for whichever reason, is not able to access the source file.
This could be because you did not include it on the command line, did not use shellcheck -x
to allow following other files, don't have permissions or a variety of other problems.
Feel free to ignore the error with a [[directive]].
Exceptions:
If you're fine with it, ignore the message with a [[directive]].
Notice
Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.
Tips depend on target shell and yours is unknown. Add a shebang. Open
# #########################################################################
- Read upRead up
- Exclude checks
Tips depend on target shell and yours is unknown. Add a shebang.
Problematic code:
echo "$RANDOM" # Does this work?
Correct code:
#!/bin/sh
echo "$RANDOM" # Unsupported in sh. Produces warning.
or
#!/bin/bash
echo "$RANDOM" # Supported in bash. No warnings.
Rationale:
Different shells support different features. To give effective advice, ShellCheck needs to know which shell your script is going to run on. You will get a different numbers of warnings about different things depending on your target shell.
ShellCheck normally determines your target shell from the shebang (having e.g. #!/bin/sh
as the first line). The shell can also be specified from the CLI with -s
, e.g. shellcheck -s sh file
.
If you don't specify shebang nor -s
, ShellCheck gives this message and proceeds with some default (bash
).
Note that this error can not be ignored with a [[directive]]. It is not a suggestion to improve your script, but a warning that ShellCheck lacks information it needs to be helpful.
Exceptions
None. Please either add a shebang or use -s
.
Notice
Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.
Can't follow non-constant source. Use a directive to specify location. Open
[ -r ~/.profile_lda ] && . ~/.profile_lda
- Read upRead up
- Exclude checks
Can't follow non-constant source. Use a directive to specify location.
Problematic code:
. "$(find_install_dir)/lib.sh"
Correct code:
# shellcheck source=src/lib.sh
. "$(find_install_dir)/lib.sh"
Rationale:
ShellCheck is not able to include sourced files from paths that are determined at runtime. The file will not be read, potentially resulting in warnings about unassigned variables and similar.
Use a [[Directive]] to point shellcheck to a fixed location it can read instead.
Exceptions:
If you don't care that ShellCheck is unable to account for the file, specify # shellcheck source=/dev/null
.
Notice
Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.
Not following: /Users/albertyw/.profile_lda: openFile: does not exist (No such file or directory) Open
[ -r /Users/albertyw/.profile_lda ] && . /Users/albertyw/.profile_lda
- Read upRead up
- Exclude checks
Not following: (error message here)
Reasons include: file not found, no permissions, not included on the command line, not allowing shellcheck
to follow files with -x
, etc.
Problematic code:
source somefile
Correct code:
# shellcheck disable=SC1091
source somefile
Rationale:
ShellCheck, for whichever reason, is not able to access the source file.
This could be because you did not include it on the command line, did not use shellcheck -x
to allow following other files, don't have permissions or a variety of other problems.
Feel free to ignore the error with a [[directive]].
Exceptions:
If you're fine with it, ignore the message with a [[directive]].
Notice
Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.
Can't follow non-constant source. Use a directive to specify location. Open
[[ -r $HOME/.bashrc_local ]] && . ~/.bashrc_local
- Read upRead up
- Exclude checks
Can't follow non-constant source. Use a directive to specify location.
Problematic code:
. "$(find_install_dir)/lib.sh"
Correct code:
# shellcheck source=src/lib.sh
. "$(find_install_dir)/lib.sh"
Rationale:
ShellCheck is not able to include sourced files from paths that are determined at runtime. The file will not be read, potentially resulting in warnings about unassigned variables and similar.
Use a [[Directive]] to point shellcheck to a fixed location it can read instead.
Exceptions:
If you don't care that ShellCheck is unable to account for the file, specify # shellcheck source=/dev/null
.
Notice
Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.
Can't follow non-constant source. Use a directive to specify location. Open
if command -v npm > /dev/null; then source <(npm completion); fi
- Read upRead up
- Exclude checks
Can't follow non-constant source. Use a directive to specify location.
Problematic code:
. "$(find_install_dir)/lib.sh"
Correct code:
# shellcheck source=src/lib.sh
. "$(find_install_dir)/lib.sh"
Rationale:
ShellCheck is not able to include sourced files from paths that are determined at runtime. The file will not be read, potentially resulting in warnings about unassigned variables and similar.
Use a [[Directive]] to point shellcheck to a fixed location it can read instead.
Exceptions:
If you don't care that ShellCheck is unable to account for the file, specify # shellcheck source=/dev/null
.
Notice
Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.
Can't follow non-constant source. Use a directive to specify location. Open
[[ -s "$HOME/.rvm/scripts/rvm" ]] && source "$HOME/.rvm/scripts/rvm" # Load RVM into a shell session *as a function*
- Read upRead up
- Exclude checks
Can't follow non-constant source. Use a directive to specify location.
Problematic code:
. "$(find_install_dir)/lib.sh"
Correct code:
# shellcheck source=src/lib.sh
. "$(find_install_dir)/lib.sh"
Rationale:
ShellCheck is not able to include sourced files from paths that are determined at runtime. The file will not be read, potentially resulting in warnings about unassigned variables and similar.
Use a [[Directive]] to point shellcheck to a fixed location it can read instead.
Exceptions:
If you don't care that ShellCheck is unable to account for the file, specify # shellcheck source=/dev/null
.
Notice
Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.
Can't follow non-constant source. Use a directive to specify location. Open
[[ -r $HOME/.bashrc ]] && . ~/.bashrc
- Read upRead up
- Exclude checks
Can't follow non-constant source. Use a directive to specify location.
Problematic code:
. "$(find_install_dir)/lib.sh"
Correct code:
# shellcheck source=src/lib.sh
. "$(find_install_dir)/lib.sh"
Rationale:
ShellCheck is not able to include sourced files from paths that are determined at runtime. The file will not be read, potentially resulting in warnings about unassigned variables and similar.
Use a [[Directive]] to point shellcheck to a fixed location it can read instead.
Exceptions:
If you don't care that ShellCheck is unable to account for the file, specify # shellcheck source=/dev/null
.
Notice
Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.
Can't follow non-constant source. Use a directive to specify location. Open
. "$brewprefix/etc/bash_completion.d/git-completion.bash"
- Read upRead up
- Exclude checks
Can't follow non-constant source. Use a directive to specify location.
Problematic code:
. "$(find_install_dir)/lib.sh"
Correct code:
# shellcheck source=src/lib.sh
. "$(find_install_dir)/lib.sh"
Rationale:
ShellCheck is not able to include sourced files from paths that are determined at runtime. The file will not be read, potentially resulting in warnings about unassigned variables and similar.
Use a [[Directive]] to point shellcheck to a fixed location it can read instead.
Exceptions:
If you don't care that ShellCheck is unable to account for the file, specify # shellcheck source=/dev/null
.
Notice
Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.
Can't follow non-constant source. Use a directive to specify location. Open
. "$brewprefix/etc/bash_completion.d/brew"
- Read upRead up
- Exclude checks
Can't follow non-constant source. Use a directive to specify location.
Problematic code:
. "$(find_install_dir)/lib.sh"
Correct code:
# shellcheck source=src/lib.sh
. "$(find_install_dir)/lib.sh"
Rationale:
ShellCheck is not able to include sourced files from paths that are determined at runtime. The file will not be read, potentially resulting in warnings about unassigned variables and similar.
Use a [[Directive]] to point shellcheck to a fixed location it can read instead.
Exceptions:
If you don't care that ShellCheck is unable to account for the file, specify # shellcheck source=/dev/null
.
Notice
Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.
FIXME found Open
todo = grep -n -e TODO -e FIXME -e XXX -e OPTIMIZE -e FIX-ME
- Exclude checks
BUG found Open
syn keyword hclTodo contained TODO FIXME XXX BUG
- Exclude checks
FIXME found Open
syn keyword hclTodo contained TODO FIXME XXX BUG
- Exclude checks
TODO found Open
syn keyword hclTodo contained TODO FIXME XXX BUG
- Exclude checks
TODO found Open
todo = grep -n -e TODO -e FIXME -e XXX -e OPTIMIZE -e FIX-ME
- Exclude checks