Sign upLogin

alexlemaire/git-assist

View on GitHub
Star

Showing 19 of 19 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

module.exports = async (args) => {
  const { fct, keys } = await require(appRoot + '/src/utils/key-gen/init.js')(args, 'gpg')
  await require(`./helpers/${fct}/main.js`)(keys)
}
Severity: Major
Found in src/functions/gpg/index.js and 1 other location - About 1 hr to fix
src/functions/ssh/index.js on lines 1..4

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 72.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

module.exports = async (args) => {
  const { fct, keys } = await require(appRoot + '/src/utils/key-gen/init.js')(args, 'ssh')
  await require(`./helpers/${fct}/main.js`)(keys)
}
Severity: Major
Found in src/functions/ssh/index.js and 1 other location - About 1 hr to fix
src/functions/gpg/index.js on lines 1..4

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 72.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Function exports has 38 lines of code (exceeds 25 allowed). Consider refactoring.
Open

module.exports = async () => {
  const inquirer = require('inquirer')
  const git = require('isomorphic-git')
  const fs = require('fs')
  const dir = '.'
Severity: Minor
Found in src/functions/pull/helpers/git-process/info-prompter.js - About 1 hr to fix

    Function exports has 30 lines of code (exceeds 25 allowed). Consider refactoring.
    Open

    module.exports = async (fcts, args) => {
  const inquirer = require('inquirer')
  require(appRoot + '/src/utils/welcome/welcome.js')
  const { action } = await inquirer.prompt([
    {
    Severity: Minor
    Found in src/utils/no-args/no-args.js - About 1 hr to fix

      Function exports has 27 lines of code (exceeds 25 allowed). Consider refactoring.
      Open

      module.exports = (type, key) => {
  const chalk = require('chalk')
  const Conf = require('conf')
  const keyConfig = new Conf({
    configName: type,
      Severity: Minor
      Found in src/utils/key-gen/delete-key.js - About 1 hr to fix

        Function processAction has 27 lines of code (exceeds 25 allowed). Consider refactoring.
        Open

        async function processAction (processes, res) {
  const { action } = await getAction(processes)
  switch (action) {
    case 'nothing': {
      res.scheduled = false
        Severity: Minor
        Found in src/functions/auto-pull/helpers/schedule-prompter.js - About 1 hr to fix

          Function main has 26 lines of code (exceeds 25 allowed). Consider refactoring.
          Open

          (async function main () {
  const inquirer = require('inquirer')
  const clog = require('../../src/utils/loggers/logger.js')({ filename: 'add-function-tool.log' })
  clog.heading('START ADD-FUNCTION tool')
  clog.info('This function will create a new utility function for you.')
          Severity: Minor
          Found in tools/add-function/add-function.js - About 1 hr to fix

            Function getQuestions has 26 lines of code (exceeds 25 allowed). Consider refactoring.
            Open

            function getQuestions () {
  return [
    {
      type: 'input',
      name: 'email',
            Severity: Minor
            Found in src/functions/ssh/helpers/generate/info-prompter.js - About 1 hr to fix

              Similar blocks of code found in 5 locations. Consider refactoring.
              Open

                clog.info(`Your newly generated key will now automatically be added to your GitHub configuration if you run ${chalk.italic.cyan('git-assist config [-g, --global]')} to configure user ${chalk.italic.blue(info.email)}!`)
              Severity: Major
              Found in src/functions/gpg/helpers/generate/main.js and 4 other locations - About 50 mins to fix
              src/functions/config/helpers/set-global-config.js on lines 16..16
              src/functions/config/helpers/set-global-config.js on lines 20..20
              src/functions/config/helpers/set-local-config.js on lines 42..42
              src/functions/config/helpers/set-local-config.js on lines 47..47

              Duplicated Code

              Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

              Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

              When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

              Tuning

              This issue has a mass of 52.

              We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

              The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

              If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

              See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

              Refactorings

              Further Reading

              Similar blocks of code found in 5 locations. Consider refactoring.
              Open

                  clog.error(`No GPG key was created via ${chalk.italic.blue('git-assist')} for ${chalk.italic.green(info.email)}: not adding a GPG key to this configuration.`)
              Severity: Major
              Found in src/functions/config/helpers/set-local-config.js and 4 other locations - About 50 mins to fix
              src/functions/config/helpers/set-global-config.js on lines 16..16
              src/functions/config/helpers/set-global-config.js on lines 20..20
              src/functions/config/helpers/set-local-config.js on lines 47..47
              src/functions/gpg/helpers/generate/main.js on lines 6..6

              Duplicated Code

              Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

              Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

              When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

              Tuning

              This issue has a mass of 52.

              We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

              The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

              If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

              See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

              Refactorings

              Further Reading

              Similar blocks of code found in 5 locations. Consider refactoring.
              Open

                  clog.error(`No GPG key was created via ${chalk.italic.blue('git-assist')} for ${chalk.italic.green(info.email)}: not adding a GPG key to this configuration.`)
              Severity: Major
              Found in src/functions/config/helpers/set-global-config.js and 4 other locations - About 50 mins to fix
              src/functions/config/helpers/set-global-config.js on lines 20..20
              src/functions/config/helpers/set-local-config.js on lines 42..42
              src/functions/config/helpers/set-local-config.js on lines 47..47
              src/functions/gpg/helpers/generate/main.js on lines 6..6

              Duplicated Code

              Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

              Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

              When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

              Tuning

              This issue has a mass of 52.

              We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

              The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

              If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

              See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

              Refactorings

              Further Reading

              Similar blocks of code found in 5 locations. Consider refactoring.
              Open

                  clog.info(`Automatically pulling GPG key created via ${chalk.italic.cyan('git-assist')} for ${chalk.italic.blue(info.email)}...`)
              Severity: Major
              Found in src/functions/config/helpers/set-local-config.js and 4 other locations - About 50 mins to fix
              src/functions/config/helpers/set-global-config.js on lines 16..16
              src/functions/config/helpers/set-global-config.js on lines 20..20
              src/functions/config/helpers/set-local-config.js on lines 42..42
              src/functions/gpg/helpers/generate/main.js on lines 6..6

              Duplicated Code

              Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

              Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

              When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

              Tuning

              This issue has a mass of 52.

              We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

              The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

              If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

              See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

              Refactorings

              Further Reading

              Similar blocks of code found in 5 locations. Consider refactoring.
              Open

                  clog.info(`Automatically pulling GPG key created via ${chalk.italic.cyan('git-assist')} for ${chalk.italic.blue(info.email)}...`)
              Severity: Major
              Found in src/functions/config/helpers/set-global-config.js and 4 other locations - About 50 mins to fix
              src/functions/config/helpers/set-global-config.js on lines 16..16
              src/functions/config/helpers/set-local-config.js on lines 42..42
              src/functions/config/helpers/set-local-config.js on lines 47..47
              src/functions/gpg/helpers/generate/main.js on lines 6..6

              Duplicated Code

              Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

              Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

              When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

              Tuning

              This issue has a mass of 52.

              We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

              The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

              If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

              See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

              Refactorings

              Further Reading

              Similar blocks of code found in 2 locations. Consider refactoring.
              Open

                  case 'edit':
      clog.info(`Updating ${chalk.italic.blue(opts.name)} process...`)
      await editProcess(opts)
      break
              Severity: Minor
              Found in src/functions/auto-pull/helpers/schedule-process.js and 1 other location - About 45 mins to fix
              src/functions/auto-pull/helpers/schedule-process.js on lines 33..36

              Duplicated Code

              Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

              Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

              When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

              Tuning

              This issue has a mass of 50.

              We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

              The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

              If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

              See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

              Refactorings

              Further Reading

              Similar blocks of code found in 2 locations. Consider refactoring.
              Open

                  case 'delete':
      clog.info(`Deleting ${chalk.italic.blue(opts.name)} process...`)
      await deleteProcess(opts)
      break
              Severity: Minor
              Found in src/functions/auto-pull/helpers/schedule-process.js and 1 other location - About 45 mins to fix
              src/functions/auto-pull/helpers/schedule-process.js on lines 29..32

              Duplicated Code

              Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

              Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

              When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

              Tuning

              This issue has a mass of 50.

              We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

              The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

              If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

              See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

              Refactorings

              Further Reading

              Similar blocks of code found in 3 locations. Consider refactoring.
              Open

                    clog.info(`If this fails/you are unsure and want to authenticate to GitHub via SSH, you can run ${chalk.italic.cyan('git-assist ssh --generate')} in order to generate an SSH key that will work with ${chalk.italic.cyan('git-assist')}`)
              Severity: Minor
              Found in src/utils/auth/auth.js and 2 other locations - About 40 mins to fix
              src/functions/config/helpers/set-global-config.js on lines 18..18
              src/functions/config/helpers/set-local-config.js on lines 44..44

              Duplicated Code

              Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

              Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

              When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

              Tuning

              This issue has a mass of 48.

              We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

              The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

              If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

              See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

              Refactorings

              Further Reading

              Similar blocks of code found in 3 locations. Consider refactoring.
              Open

                  clog.info(`If you wish to let ${chalk.italic.blue('git-assist')} handle your GPG keys accross users, please run ${chalk.cyan.italic('git-assist gpg --generate')} in order to generate a GPG key then rerun this command to add it automatically to your configuration.\n`)
              Severity: Minor
              Found in src/functions/config/helpers/set-local-config.js and 2 other locations - About 40 mins to fix
              src/functions/config/helpers/set-global-config.js on lines 18..18
              src/utils/auth/auth.js on lines 32..32

              Duplicated Code

              Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

              Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

              When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

              Tuning

              This issue has a mass of 48.

              We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

              The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

              If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

              See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

              Refactorings

              Further Reading

              Similar blocks of code found in 3 locations. Consider refactoring.
              Open

                  clog.info(`If you wish to let ${chalk.italic.blue('git-assist')} handle your GPG keys accross users, please run ${chalk.cyan.italic('git-assist gpg --generate')} in order to generate a GPG key then rerun this command to add it automatically to your configuration.\n`)
              Severity: Minor
              Found in src/functions/config/helpers/set-global-config.js and 2 other locations - About 40 mins to fix
              src/functions/config/helpers/set-local-config.js on lines 44..44
              src/utils/auth/auth.js on lines 32..32

              Duplicated Code

              Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

              Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

              When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

              Tuning

              This issue has a mass of 48.

              We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

              The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

              If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

              See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

              Refactorings

              Further Reading

              Function exports has a Cognitive Complexity of 6 (exceeds 5 allowed). Consider refactoring.
              Open

              module.exports = async (args) => {
  const Conf = require('conf')
  const chalk = require('chalk')
  const config = new Conf({
    configName: 'auto-pull',
              Severity: Minor
              Found in src/functions/auto-pull/index.js - About 25 mins to fix

              Cognitive Complexity

              Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

              A method's cognitive complexity is based on a few simple rules:

              • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
              • Code is considered more complex for each "break in the linear flow of the code"
              • Code is considered more complex when "flow breaking structures are nested"

              Further reading

              Severity
              Category
              Status
              Source
              Language