Sign upLogin

andrewinci/Insulator

View on GitHub
Star

Showing 86 of 88 total issues

Similar blocks of code found in 3 locations. Consider refactoring.
Open

        humanReadableLogicalType && schema.objectProps["logicalType"] == "timestamp-millis" && field is Long -> {
            Instant.EPOCH.plus(field, ChronoUnit.MILLIS).toString().right()
        }
Severity: Major
Found in lib/jsonhelper/src/main/kotlin/insulator/jsonhelper/avrotojson/PrimitiveTypeParsers.kt and 2 other locations - About 1 hr to fix
lib/jsonhelper/src/main/kotlin/insulator/jsonhelper/avrotojson/PrimitiveTypeParsers.kt on lines 34..36
lib/jsonhelper/src/main/kotlin/insulator/jsonhelper/avrotojson/PrimitiveTypeParsers.kt on lines 49..51

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 111.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

        humanReadableLogicalType && schema.objectProps["logicalType"] == "local-timestamp-millis" && field is Long -> {
            Instant.EPOCH.plus(field, ChronoUnit.MILLIS).toString().right()
        }
Severity: Major
Found in lib/jsonhelper/src/main/kotlin/insulator/jsonhelper/avrotojson/PrimitiveTypeParsers.kt and 2 other locations - About 1 hr to fix
lib/jsonhelper/src/main/kotlin/insulator/jsonhelper/avrotojson/PrimitiveTypeParsers.kt on lines 31..33
lib/jsonhelper/src/main/kotlin/insulator/jsonhelper/avrotojson/PrimitiveTypeParsers.kt on lines 34..36

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 111.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Method parseNumber has 33 lines of code (exceeds 25 allowed). Consider refactoring.
Open

internal fun parseNumber(
    field: Any?,
    schema: Schema,
    humanReadableLogicalType: Boolean
): Either<AvroToJsonParsingException, Any?> {
Severity: Minor
Found in lib/jsonhelper/src/main/kotlin/insulator/jsonhelper/avrotojson/PrimitiveTypeParsers.kt - About 1 hr to fix

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

        @Provides
    @ClusterScope
    fun providesConsumer(cluster: Cluster, converter: AvroToJsonConverter) =
        consumer(cluster) { converter.parse(it, GlobalState.humanReadableAvroProperty.value) }
    Severity: Major
    Found in app/src/main/kotlin/insulator/di/modules/ClusterModule.kt and 1 other location - About 1 hr to fix
    app/src/main/kotlin/insulator/di/modules/TopicModule.kt on lines 14..17

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 107.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

        @Provides
    @TopicScope
    fun providesConsumer(cluster: Cluster, converter: AvroToJsonConverter) =
        consumer(cluster) { converter.parse(it, GlobalState.humanReadableAvroProperty.value) }
    Severity: Major
    Found in app/src/main/kotlin/insulator/di/modules/TopicModule.kt and 1 other location - About 1 hr to fix
    app/src/main/kotlin/insulator/di/modules/ClusterModule.kt on lines 24..27

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 107.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

                    corner {
                    borderColor = multi(box(theme.backgroundColor))
                    backgroundInsets = multi(box(0.0.px))
                    backgroundColor = multi(theme.backgroundColor)
                }
    Severity: Major
    Found in app/src/main/kotlin/insulator/ui/style/ScrollPaneStyle.kt and 1 other location - About 1 hr to fix
    app/src/main/kotlin/insulator/ui/style/ScrollPaneStyle.kt on lines 19..23

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 106.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

                    viewport {
                    borderColor = multi(box(theme.backgroundColor))
                    backgroundInsets = multi(box(0.0.px))
                    backgroundColor = multi(theme.backgroundColor)
                }
    Severity: Major
    Found in app/src/main/kotlin/insulator/ui/style/ScrollPaneStyle.kt and 1 other location - About 1 hr to fix
    app/src/main/kotlin/insulator/ui/style/ScrollPaneStyle.kt on lines 24..28

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 106.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Method parse has a Cognitive Complexity of 26 (exceeds 20 allowed). Consider refactoring.
    Open

        override fun parse(fieldValue: Any?, schema: Schema) = either.eager<JsonFieldParsingException, GenericRecord> {
        val jsonMap = !(
            if (schema.type != Schema.Type.RECORD || fieldValue !is Map<*, *>)
                JsonInvalidFieldException(schema, fieldValue).left()
            else fieldValue.right()
    Severity: Minor
    Found in lib/jsonhelper/src/main/kotlin/insulator/jsonhelper/jsontoavro/fieldparser/RecordParser.kt - About 1 hr to fix

    Cognitive Complexity

    Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

    A method's cognitive complexity is based on a few simple rules:

    • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
    • Code is considered more complex for each "break in the linear flow of the code"
    • Code is considered more complex when "flow breaking structures are nested"

    Further reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

                            and(selected) {
                            tabContainer { tabLabel { text { fill = Color.WHITE } } }
                            backgroundColor = multi(theme.mainColor)
                        }
    Severity: Major
    Found in app/src/main/kotlin/insulator/ui/style/MainViewStyle.kt and 1 other location - About 1 hr to fix
    app/src/main/kotlin/insulator/ui/style/MainViewStyle.kt on lines 85..88

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 100.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

                            and(hover) {
                            tabContainer { tabLabel { text { fill = Color.WHITE } } }
                            backgroundColor = multi(theme.mainColorDark)
                        }
    Severity: Major
    Found in app/src/main/kotlin/insulator/ui/style/MainViewStyle.kt and 1 other location - About 1 hr to fix
    app/src/main/kotlin/insulator/ui/style/MainViewStyle.kt on lines 81..84

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 100.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

        val filteredSchemasProperty = SortedFilteredList(schemasProperty).apply {
        filterWhen(searchItemProperty) { p, i -> i.toLowerCase().contains(p.toLowerCase()) }
    }.filteredItems
    Severity: Major
    Found in app/src/main/kotlin/insulator/viewmodel/main/schemaregistry/ListSchemaViewModel.kt and 1 other location - About 1 hr to fix
    app/src/main/kotlin/insulator/viewmodel/main/topic/ListTopicViewModel.kt on lines 36..38

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 95.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

            button("Register") {
            id = "button-schema-register"
            enableWhen(viewModel.isSchemaValidProperty)
            action { viewModel.dispatch { register() }; close() }
        }
    Severity: Major
    Found in app/src/main/kotlin/insulator/views/main/schemaregistry/CreateSchemaView.kt and 1 other location - About 1 hr to fix
    app/src/main/kotlin/insulator/views/main/topic/ProducerView.kt on lines 50..54

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 95.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

                right = button("Send") {
                id = "button-producer-send"
                enableWhen(viewModel.canSendProperty)
                action { viewModel.dispatch { send() }; close() }
            }
    Severity: Major
    Found in app/src/main/kotlin/insulator/views/main/topic/ProducerView.kt and 1 other location - About 1 hr to fix
    app/src/main/kotlin/insulator/views/main/schemaregistry/CreateSchemaView.kt on lines 68..72

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 95.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

        val filteredTopicsProperty: ObservableList<String> = SortedFilteredList(topicListProperty)
        .apply { filterWhen(searchItemProperty) { p, i -> i.toLowerCase().contains(p.toLowerCase()) } }
        .filteredItems
    Severity: Major
    Found in app/src/main/kotlin/insulator/viewmodel/main/topic/ListTopicViewModel.kt and 1 other location - About 1 hr to fix
    app/src/main/kotlin/insulator/viewmodel/main/schemaregistry/ListSchemaViewModel.kt on lines 37..39

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 95.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

            confirmationButton("Delete", "The consumer group \"${viewModel.nameProperty.value}\" will be removed.") {
            viewModel.dispatch { delete() }
            closeTab()
        }.hideOnReadonly()
    Severity: Minor
    Found in app/src/main/kotlin/insulator/views/main/consumergroup/ConsumerGroupView.kt and 1 other location - About 55 mins to fix
    app/src/main/kotlin/insulator/views/main/topic/TopicView.kt on lines 97..100

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 86.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

            confirmationButton("Delete", "The topic \"${viewModel.nameProperty.value}\" will be removed.") {
            viewModel.dispatch { delete() }
            closeTab()
        }.enableWhen(viewModel.consumerViewModel.isConsumingProperty.not()).hideOnReadonly()
    Severity: Minor
    Found in app/src/main/kotlin/insulator/views/main/topic/TopicView.kt and 1 other location - About 55 mins to fix
    app/src/main/kotlin/insulator/views/main/consumergroup/ConsumerGroupView.kt on lines 60..63

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 86.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

                    field("SSL Keystore Location") {
                    customTextField(viewModel.sslKeystoreLocationProperty) { enableWhen(SimpleBooleanProperty(false)) }
                    fileChooser(viewModel.sslKeystoreLocationProperty)
                }
    Severity: Minor
    Found in app/src/main/kotlin/insulator/views/configurations/ClusterView.kt and 1 other location - About 55 mins to fix
    app/src/main/kotlin/insulator/views/configurations/ClusterView.kt on lines 43..46

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 85.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 3 locations. Consider refactoring.
    Open

            appBar {
            title = "Topics"
            subtitle = viewModel.subtitleProperty
            buttons = listOf(refreshButton("topic-list", viewModel::refresh))
        }
    Severity: Major
    Found in app/src/main/kotlin/insulator/views/main/topic/ListTopicView.kt and 2 other locations - About 55 mins to fix
    app/src/main/kotlin/insulator/views/main/consumergroup/ListConsumerGroupView.kt on lines 28..32
    app/src/main/kotlin/insulator/views/main/schemaregistry/ListSchemaView.kt on lines 32..36

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 85.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

                    field("SSL Truststore Location") {
                    customTextField(viewModel.sslTruststoreLocationProperty) { enableWhen(SimpleBooleanProperty(false)) }
                    fileChooser(viewModel.sslTruststoreLocationProperty)
                }
    Severity: Minor
    Found in app/src/main/kotlin/insulator/views/configurations/ClusterView.kt and 1 other location - About 55 mins to fix
    app/src/main/kotlin/insulator/views/configurations/ClusterView.kt on lines 48..51

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 85.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 3 locations. Consider refactoring.
    Open

            appBar {
            title = "Schema registry"
            subtitle = viewModel.subtitleProperty
            buttons = listOf(refreshButton("schema-list", viewModel::refresh))
        }
    Severity: Major
    Found in app/src/main/kotlin/insulator/views/main/schemaregistry/ListSchemaView.kt and 2 other locations - About 55 mins to fix
    app/src/main/kotlin/insulator/views/main/consumergroup/ListConsumerGroupView.kt on lines 28..32
    app/src/main/kotlin/insulator/views/main/topic/ListTopicView.kt on lines 30..34

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 85.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Severity
    Category
    Status
    Source
    Language