Avoid too many return
statements within this function. Open
return RECORDS_PER_MESSAGE_DEFAULT
Similar blocks of code found in 2 locations. Consider refactoring. Open
if interval == 'latest':
msgs, recs = unloader.unload_latest(table_name, send_ur)
elif interval == 'gap':
start = cp.get('unloader', 'gap_start')
end = cp.get('unloader', 'gap_end')
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 123.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
try:
if os.path.exists(options.log_config):
logging.config.fileConfig(options.log_config)
else:
set_up_logging(cp.get('logging', 'logfile'),
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 41.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 4 locations. Consider refactoring. Open
try:
include = cp.get('unloader', 'include_vos')
include_vos = [ vo.strip() for vo in include.split(',') ]
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 36.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 4 locations. Consider refactoring. Open
try:
exclude = cp.get('unloader', 'exclude_vos')
exclude_vos = [ vo.strip() for vo in exclude.split(',') ]
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 36.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Line too long (97 > 79 characters) Open
opt_parser.add_option('-c', '--config', help='Location of configuration file for dbunloader',
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Module level import not at top of file Open
import logging.config
- Read upRead up
- Exclude checks
Place imports at the top of the file.
Always put imports at the top of the file, just after any module
comments and docstrings, and before module globals and constants.
Okay: import os
Okay: # this is a comment\nimport os
Okay: '''this is a module docstring'''\nimport os
Okay: r'''this is a module docstring'''\nimport os
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nelse:\n\tpass\nimport y
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nfinally:\n\tpass\nimport y
E402: a=1\nimport os
E402: 'One string'\n"Two string"\nimport os
E402: a=1\nfrom sys import x
Okay: if x:\n import os
Module level import not at top of file Open
from apel.common import set_up_logging
- Read upRead up
- Exclude checks
Place imports at the top of the file.
Always put imports at the top of the file, just after any module
comments and docstrings, and before module globals and constants.
Okay: import os
Okay: # this is a comment\nimport os
Okay: '''this is a module docstring'''\nimport os
Okay: r'''this is a module docstring'''\nimport os
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nelse:\n\tpass\nimport y
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nfinally:\n\tpass\nimport y
E402: a=1\nimport os
E402: 'One string'\n"Two string"\nimport os
E402: a=1\nfrom sys import x
Okay: if x:\n import os
Module level import not at top of file Open
from apel import __version__
- Read upRead up
- Exclude checks
Place imports at the top of the file.
Always put imports at the top of the file, just after any module
comments and docstrings, and before module globals and constants.
Okay: import os
Okay: # this is a comment\nimport os
Okay: '''this is a module docstring'''\nimport os
Okay: r'''this is a module docstring'''\nimport os
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nelse:\n\tpass\nimport y
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nfinally:\n\tpass\nimport y
E402: a=1\nimport os
E402: 'One string'\n"Two string"\nimport os
E402: a=1\nfrom sys import x
Okay: if x:\n import os
Multiple spaces before operator Open
include = cp.get('unloader', 'include_vos')
- Read upRead up
- Exclude checks
Avoid extraneous whitespace around an operator.
Okay: a = 12 + 3
E221: a = 4 + 5
E222: a = 4 + 5
E223: a = 4\t+ 5
E224: a = 4 +\t5
Line too long (87 > 79 characters) Open
records_per_message = int(config_object.get('unloader', 'records_per_message'))
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Line too long (107 > 79 characters) Open
opt_parser.add_option('-l', '--log_config', help='Location of logging configuration file for dbloader',
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Multiple spaces before operator Open
withhold_dns = cp.getboolean('unloader', 'withhold_dns')
- Read upRead up
- Exclude checks
Avoid extraneous whitespace around an operator.
Okay: a = 12 + 3
E221: a = 4 + 5
E222: a = 4 + 5
E223: a = 4\t+ 5
E224: a = 4 +\t5
Module level import not at top of file Open
import os
- Read upRead up
- Exclude checks
Place imports at the top of the file.
Always put imports at the top of the file, just after any module
comments and docstrings, and before module globals and constants.
Okay: import os
Okay: # this is a comment\nimport os
Okay: '''this is a module docstring'''\nimport os
Okay: r'''this is a module docstring'''\nimport os
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nelse:\n\tpass\nimport y
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nfinally:\n\tpass\nimport y
E402: a=1\nimport os
E402: 'One string'\n"Two string"\nimport os
E402: a=1\nfrom sys import x
Okay: if x:\n import os
Multiple spaces before operator Open
table_name = cp.get('unloader', 'table_name')
- Read upRead up
- Exclude checks
Avoid extraneous whitespace around an operator.
Okay: a = 12 + 3
E221: a = 4 + 5
E222: a = 4 + 5
E223: a = 4\t+ 5
E224: a = 4 +\t5
Module level import not at top of file Open
from optparse import OptionParser
- Read upRead up
- Exclude checks
Place imports at the top of the file.
Always put imports at the top of the file, just after any module
comments and docstrings, and before module globals and constants.
Okay: import os
Okay: # this is a comment\nimport os
Okay: '''this is a module docstring'''\nimport os
Okay: r'''this is a module docstring'''\nimport os
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nelse:\n\tpass\nimport y
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nfinally:\n\tpass\nimport y
E402: a=1\nimport os
E402: 'One string'\n"Two string"\nimport os
E402: a=1\nfrom sys import x
Okay: if x:\n import os
Module level import not at top of file Open
from apel.db.unloader import DbUnloader
- Read upRead up
- Exclude checks
Place imports at the top of the file.
Always put imports at the top of the file, just after any module
comments and docstrings, and before module globals and constants.
Okay: import os
Okay: # this is a comment\nimport os
Okay: '''this is a module docstring'''\nimport os
Okay: r'''this is a module docstring'''\nimport os
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nelse:\n\tpass\nimport y
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nfinally:\n\tpass\nimport y
E402: a=1\nimport os
E402: 'One string'\n"Two string"\nimport os
E402: a=1\nfrom sys import x
Okay: if x:\n import os
Line too long (94 > 79 characters) Open
'Invalid records_per_message value, must be a postive integer. Defaulting to %d.',
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Module level import not at top of file Open
from apel.db import ApelDb, ApelDbException
- Read upRead up
- Exclude checks
Place imports at the top of the file.
Always put imports at the top of the file, just after any module
comments and docstrings, and before module globals and constants.
Okay: import os
Okay: # this is a comment\nimport os
Okay: '''this is a module docstring'''\nimport os
Okay: r'''this is a module docstring'''\nimport os
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nelse:\n\tpass\nimport y
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nfinally:\n\tpass\nimport y
E402: a=1\nimport os
E402: 'One string'\n"Two string"\nimport os
E402: a=1\nfrom sys import x
Okay: if x:\n import os
Multiple spaces before operator Open
unload_dir = cp.get('unloader', 'dir_location')
- Read upRead up
- Exclude checks
Avoid extraneous whitespace around an operator.
Okay: a = 12 + 3
E221: a = 4 + 5
E222: a = 4 + 5
E223: a = 4\t+ 5
E224: a = 4 +\t5
Multiple spaces before operator Open
include_vos = None
- Read upRead up
- Exclude checks
Avoid extraneous whitespace around an operator.
Okay: a = 12 + 3
E221: a = 4 + 5
E222: a = 4 + 5
E223: a = 4\t+ 5
E224: a = 4 +\t5
Line too long (81 > 79 characters) Open
"""Retrieve the records per message from config, keeping it within limits."""
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Line too long (91 > 79 characters) Open
opt_parser.add_option('-d', '--db', help='location of configuration file for database',
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Module level import not at top of file Open
import sys
- Read upRead up
- Exclude checks
Place imports at the top of the file.
Always put imports at the top of the file, just after any module
comments and docstrings, and before module globals and constants.
Okay: import os
Okay: # this is a comment\nimport os
Okay: '''this is a module docstring'''\nimport os
Okay: r'''this is a module docstring'''\nimport os
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nelse:\n\tpass\nimport y
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nfinally:\n\tpass\nimport y
E402: a=1\nimport os
E402: 'One string'\n"Two string"\nimport os
E402: a=1\nfrom sys import x
Okay: if x:\n import os
Multiple spaces before operator Open
exclude_vos = None
- Read upRead up
- Exclude checks
Avoid extraneous whitespace around an operator.
Okay: a = 12 + 3
E221: a = 4 + 5
E222: a = 4 + 5
E223: a = 4\t+ 5
E224: a = 4 +\t5
Line too long (86 > 79 characters) Open
log.info('%d records in %d messages unloaded from %s', recs, msgs, table_name)
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Whitespace before ']' Open
exclude_vos = [ vo.strip() for vo in exclude.split(',') ]
- Read upRead up
- Exclude checks
Avoid extraneous whitespace.
Avoid extraneous whitespace in these situations:
- Immediately inside parentheses, brackets or braces.
- Immediately before a comma, semicolon, or colon.
Okay: spam(ham[1], {eggs: 2})
E201: spam( ham[1], {eggs: 2})
E201: spam(ham[ 1], {eggs: 2})
E201: spam(ham[1], { eggs: 2})
E202: spam(ham[1], {eggs: 2} )
E202: spam(ham[1 ], {eggs: 2})
E202: spam(ham[1], {eggs: 2 })
E203: if x == 4: print x, y; x, y = y , x
E203: if x == 4: print x, y ; x, y = y, x
E203: if x == 4 : print x, y; x, y = y, x
Line too long (93 > 79 characters) Open
unloader = DbUnloader(db, unload_dir, include_vos, exclude_vos, local_jobs, withhold_dns)
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Whitespace after '[' Open
include_vos = [ vo.strip() for vo in include.split(',') ]
- Read upRead up
- Exclude checks
Avoid extraneous whitespace.
Avoid extraneous whitespace in these situations:
- Immediately inside parentheses, brackets or braces.
- Immediately before a comma, semicolon, or colon.
Okay: spam(ham[1], {eggs: 2})
E201: spam( ham[1], {eggs: 2})
E201: spam(ham[ 1], {eggs: 2})
E201: spam(ham[1], { eggs: 2})
E202: spam(ham[1], {eggs: 2} )
E202: spam(ham[1 ], {eggs: 2})
E202: spam(ham[1], {eggs: 2 })
E203: if x == 4: print x, y; x, y = y , x
E203: if x == 4: print x, y ; x, y = y, x
E203: if x == 4 : print x, y; x, y = y, x
Whitespace after '[' Open
exclude_vos = [ vo.strip() for vo in exclude.split(',') ]
- Read upRead up
- Exclude checks
Avoid extraneous whitespace.
Avoid extraneous whitespace in these situations:
- Immediately inside parentheses, brackets or braces.
- Immediately before a comma, semicolon, or colon.
Okay: spam(ham[1], {eggs: 2})
E201: spam( ham[1], {eggs: 2})
E201: spam(ham[ 1], {eggs: 2})
E201: spam(ham[1], { eggs: 2})
E202: spam(ham[1], {eggs: 2} )
E202: spam(ham[1 ], {eggs: 2})
E202: spam(ham[1], {eggs: 2 })
E203: if x == 4: print x, y; x, y = y , x
E203: if x == 4: print x, y ; x, y = y, x
E203: if x == 4 : print x, y; x, y = y, x
Multiple spaces before operator Open
exclude = cp.get('unloader', 'exclude_vos')
- Read upRead up
- Exclude checks
Avoid extraneous whitespace around an operator.
Okay: a = 12 + 3
E221: a = 4 + 5
E222: a = 4 + 5
E223: a = 4\t+ 5
E224: a = 4 +\t5
Multiple spaces before operator Open
exclude_vos = [ vo.strip() for vo in exclude.split(',') ]
- Read upRead up
- Exclude checks
Avoid extraneous whitespace around an operator.
Okay: a = 12 + 3
E221: a = 4 + 5
E222: a = 4 + 5
E223: a = 4\t+ 5
E224: a = 4 +\t5
Multiple spaces before operator Open
include_vos = [ vo.strip() for vo in include.split(',') ]
- Read upRead up
- Exclude checks
Avoid extraneous whitespace around an operator.
Okay: a = 12 + 3
E221: a = 4 + 5
E222: a = 4 + 5
E223: a = 4\t+ 5
E224: a = 4 +\t5
Whitespace before ']' Open
include_vos = [ vo.strip() for vo in include.split(',') ]
- Read upRead up
- Exclude checks
Avoid extraneous whitespace.
Avoid extraneous whitespace in these situations:
- Immediately inside parentheses, brackets or braces.
- Immediately before a comma, semicolon, or colon.
Okay: spam(ham[1], {eggs: 2})
E201: spam( ham[1], {eggs: 2})
E201: spam(ham[ 1], {eggs: 2})
E201: spam(ham[1], { eggs: 2})
E202: spam(ham[1], {eggs: 2} )
E202: spam(ham[1 ], {eggs: 2})
E202: spam(ham[1], {eggs: 2 })
E203: if x == 4: print x, y; x, y = y , x
E203: if x == 4: print x, y ; x, y = y, x
E203: if x == 4 : print x, y; x, y = y, x