module.exports = () => new Promise((resolve, reject) => {
  readDir(paths.models, '.js')
    .then((models) => {
      models = models.map((model) => {
        const modelName = resolveName(model);

Close

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 123.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

module.exports = () => new Promise((resolve, reject) => {
  readDir(paths.services, '.js')
    .then((services) => {
      services = services.map((service) => {
        const serviceName = resolveName(service);

Close

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 123.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

module.exports = () => new Promise((resolve, reject) => {
  readDir(paths.controllers, '.js')
    .then((controllers) => {
      controllers = controllers.map((controller) => {
        const controllerName = resolveName(controller);

Close

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 123.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

const resolveName = (name) => {
  const plural = pluralize.plural(path.basename(name, '.js'));
  const serviceName = `${capitalize(plural)}Service`;
  debug(`resolve service name: ${serviceName}`);
  return serviceName;

Close

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 76.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

const resolveName = (name) => {
  const singular = pluralize.singular(path.basename(name, '.js'));
  const modelName = `${capitalize(singular)}Model`;
  debug(`resolve model name: ${modelName}`);
  return modelName;

Close

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 76.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

const resolveName = (name) => {
  const plural = pluralize.plural(path.basename(name, '.js'));
  const controllerName = `${capitalize(plural)}Controller`;
  debug(`resolve controller name: ${controllerName}`);
  return controllerName;

Close

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 76.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

const resolveName = (name) => {
  const singular = pluralize.singular(path.basename(name, '.js'));
  const middlewareName = `${capitalize(singular)}Middleware`;
  debug(`resolve middleware name: ${middlewareName}`);
  return middlewareName;

Close

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 76.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

module.exports = (projectFolder, api = false) => new Promise((resolve, reject) => {
  debug('downloading sources');

  request('https://github.com/apogeu/apogeu-structure/archive/master.zip')
    .pipe(unzip.Parse())

Close

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

• Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
• Code is considered more complex for each "break in the linear flow of the code"
• Code is considered more complex when "flow breaking structures are nested"

Further reading

• Cognitive Complexity docs
• Cognitive Complexity: A new way of measuring understandability

module.exports = (dir, ext = '') => new Promise((resolve, reject) => {
  debug(`read dir: ${dir}`);
  fs.readdir(dir, (err, files) => {
    if (err) return reject(err);
    if (ext) files = files.filter(file => path.extname(file) === ext);

Close

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

• Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
• Code is considered more complex for each "break in the linear flow of the code"
• Code is considered more complex when "flow breaking structures are nested"

Further reading

• Cognitive Complexity docs
• Cognitive Complexity: A new way of measuring understandability

      const isView = filePath.split('/').map(val => ['views', 'assets', 'public'].includes(val)).includes(true);

Close

enforce a maximum line length (max-len)

Very long lines of code in any language can be difficult to read. In order to aid in readability and maintainability many coders have developed a convention to limit lines of code to X number of characters (traditionally 80 characters).

var foo = { "bar": "This is a bar.", "baz": { "qux": "This is a qux" }, "difficult": "to read" }; // very long

Rule Details

This rule enforces a maximum line length to increase code readability and maintainability.

Note: This rule calculates the length of a line via code points, not characters. That means if you use a double-byte character in your code, it will count as 2 code points instead of 1, and 2 will be used to calculate line length. This is a technical limitation of JavaScript that is made easier with ES2015, and we will look to update this when ES2015 is available in Node.js.

Options

This rule has a number or object option:

• "code" (default 80) enforces a maximum line length
• "tabWidth" (default 4) specifies the character width for tab characters
• "comments" enforces a maximum line length for comments; defaults to value of code
• "ignorePattern" ignores lines matching a regular expression; can only match a single line and need to be double escaped when written in YAML or JSON
• "ignoreComments": true ignores all trailing comments and comments on their own line
• "ignoreTrailingComments": true ignores only trailing comments
• "ignoreUrls": true ignores lines that contain a URL

code

Examples of incorrect code for this rule with the default { "code": 80 } option:

/*eslint max-len: ["error", 80]*/

var foo = { "bar": "This is a bar.", "baz": { "qux": "This is a qux" }, "difficult": "to read" };

Examples of correct code for this rule with the default { "code": 80 } option:

/*eslint max-len: ["error", 80]*/

var foo = {
  "bar": "This is a bar.",
  "baz": { "qux": "This is a qux" },
  "easier": "to read"
};

tabWidth

Examples of incorrect code for this rule with the default { "tabWidth": 4 } option:

/*eslint max-len: ["error", 80, 4]*/

\t  \t  var foo = { "bar": "This is a bar.", "baz": { "qux": "This is a qux" } };

Examples of correct code for this rule with the default { "tabWidth": 4 } option:

/*eslint max-len: ["error", 80, 4]*/

\t  \t  var foo = {
\t  \t  \t  \t  "bar": "This is a bar.",
\t  \t  \t  \t  "baz": { "qux": "This is a qux" }
\t  \t  };

comments

Examples of incorrect code for this rule with the { "comments": 65 } option:

/*eslint max-len: ["error", { "comments": 65 }]*/

/**
 * This is a comment that violates the maximum line length we have specified
**/

ignoreComments

Examples of correct code for this rule with the { "ignoreComments": true } option:

/*eslint max-len: ["error", { "ignoreComments": true }]*/

/**
 * This is a really really really really really really really really really long comment
**/

ignoreTrailingComments

Examples of correct code for this rule with the { "ignoreTrailingComments": true } option:

/*eslint max-len: ["error", { "ignoreTrailingComments": true }]*/

var foo = 'bar'; // This is a really really really really really really really long comment

ignoreUrls

Examples of correct code for this rule with the { "ignoreUrls": true } option:

/*eslint max-len: ["error", { "ignoreUrls": true }]*/

var url = 'https://www.example.com/really/really/really/really/really/really/really/long';

ignorePattern

Examples of correct code for this rule with the { "ignorePattern": true } option:

/*eslint max-len: ["error", { "ignorePattern": "^\\s*var\\s.+=\\s*require\\s*\\(/" }]*/

var dep = require('really/really/really/really/really/really/really/really/long/module');

Related Rules

• [complexity](complexity.md)
• [max-depth](max-depth.md)
• [max-nested-callbacks](max-nested-callbacks.md)
• [max-params](max-params.md)
• [max-statements](max-statements.md) Source: http://eslint.org/docs/rules/