Similar blocks of code found in 12 locations. Consider refactoring. Open
describe("xhr test (Match)", function () {
var returnedJSON: any = {};
var status = 0;
beforeEach(function (done) {
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 438.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
it('Is setformat matches with expected query format when pass options with query', () => {
query.optionRows = [{
name: 'operator',
value: 'and'
}, {
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 80.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
" should be ' Open
"operator" : "and",
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
" should be ' Open
"query": {
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
" should be ' Open
"bool": {
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
non-arrow functions are forbidden Open
success: function(res) {
- Read upRead up
- Exclude checks
Rule: only-arrow-functions
Disallows traditional (non-arrow) function expressions.
Note that non-arrow functions are allowed if 'this' appears somewhere in its body (as such functions cannot be converted to arrow functions).
Rationale
Traditional functions don't bind lexical scope, which can lead to unexpected behavior when accessing 'this'.
Config
Two arguments may be optionally provided:
-
"allow-declarations"
allows standalone function declarations. -
"allow-named-functions"
allows the expressionfunction foo() {}
but notfunction() {}
.
Examples
"only-arrow-functions": true
"only-arrow-functions": true,allow-declarations,allow-named-functions
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"allow-declarations",
"allow-named-functions"
]
},
"minLength": 0,
"maxLength": 1
}
For more information see this page.
non-arrow functions are forbidden Open
it("Should have returned JSON and Should have atleast 1 record", function () {
- Read upRead up
- Exclude checks
Rule: only-arrow-functions
Disallows traditional (non-arrow) function expressions.
Note that non-arrow functions are allowed if 'this' appears somewhere in its body (as such functions cannot be converted to arrow functions).
Rationale
Traditional functions don't bind lexical scope, which can lead to unexpected behavior when accessing 'this'.
Config
Two arguments may be optionally provided:
-
"allow-declarations"
allows standalone function declarations. -
"allow-named-functions"
allows the expressionfunction foo() {}
but notfunction() {}
.
Examples
"only-arrow-functions": true
"only-arrow-functions": true,allow-declarations,allow-named-functions
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"allow-declarations",
"allow-named-functions"
]
},
"minLength": 0,
"maxLength": 1
}
For more information see this page.
" should be ' Open
describe("xhr test (Match)", function () {
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
Missing semicolon Open
})
- Read upRead up
- Exclude checks
Rule: semicolon
Enforces consistent semicolon usage at the end of every statement.
Notes
- Has Fix
Config
One of the following arguments must be provided:
-
"always"
enforces semicolons at the end of every statement. -
"never"
disallows semicolons at the end of every statement except for when they are necessary.
The following arguments may be optionally provided:
-
"ignore-interfaces"
skips checking semicolons at the end of interface members. -
"ignore-bound-class-methods"
skips checking semicolons at the end of bound class methods. -
"strict-bound-class-methods"
disables any special handling of bound class methods and treats them as any other assignment. This option overrides"ignore-bound-class-methods"
.
Examples
"semicolon": true,always
"semicolon": true,never
"semicolon": true,always,ignore-interfaces
"semicolon": true,always,ignore-bound-class-methods
Schema
{
"type": "array",
"items": [
{
"type": "string",
"enum": [
"always",
"never"
]
},
{
"type": "string",
"enum": [
"ignore-interfaces"
]
}
],
"additionalItems": false
}
For more information see this page.
Expected property shorthand in object literal ('{url}'). Open
url: url,
- Read upRead up
- Exclude checks
Rule: object-literal-shorthand
Enforces/disallows use of ES6 object literal shorthand.
Notes
- Has Fix
Config
"always"
assumed to be default option, thus with no options provided
the rule enforces object literal methods and properties shorthands.
With "never"
option provided, any shorthand object literal syntax causes an error.
The rule can be configured in a more granular way.
With {"property": "never"}
provided (which is equivalent to {"property": "never", "method": "always"}
),
the rule only flags property shorthand assignments,
and respectively with {"method": "never"}
(equivalent to {"property": "always", "method": "never"}
),
the rule fails only on method shorthands.
Examples
"object-literal-shorthand": true
"object-literal-shorthand": true,never
"object-literal-shorthand": true,[object Object]
Schema
{
"oneOf": [
{
"type": "string",
"enum": [
"never"
]
},
{
"type": "object",
"properties": {
"property": {
"type": "string",
"enum": [
"never"
]
},
"method": {
"type": "string",
"enum": [
"never"
]
}
},
"minProperties": 1,
"maxProperties": 2
}
]
}
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var query = new MatchQuery();
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
non-arrow functions are forbidden Open
beforeEach(function (done) {
- Read upRead up
- Exclude checks
Rule: only-arrow-functions
Disallows traditional (non-arrow) function expressions.
Note that non-arrow functions are allowed if 'this' appears somewhere in its body (as such functions cannot be converted to arrow functions).
Rationale
Traditional functions don't bind lexical scope, which can lead to unexpected behavior when accessing 'this'.
Config
Two arguments may be optionally provided:
-
"allow-declarations"
allows standalone function declarations. -
"allow-named-functions"
allows the expressionfunction foo() {}
but notfunction() {}
.
Examples
"only-arrow-functions": true
"only-arrow-functions": true,allow-declarations,allow-named-functions
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"allow-declarations",
"allow-named-functions"
]
},
"minLength": 0,
"maxLength": 1
}
For more information see this page.
Identifier 'validJson' is never reassigned; use 'const' instead of 'var'. Open
var validJson = isValidJson(JSON.stringify(format));
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
Identifier 'format' is never reassigned; use 'const' instead of 'var'. Open
var format = query.setFormat();
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
Identifier 'config' is never reassigned; use 'const' instead of 'var'. Open
var config = {
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var returnedJSON: any = {};
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Expected method shorthand in object literal ('{beforeSend() {...}}'). Open
beforeSend: function(request) {
- Read upRead up
- Exclude checks
Rule: object-literal-shorthand
Enforces/disallows use of ES6 object literal shorthand.
Notes
- Has Fix
Config
"always"
assumed to be default option, thus with no options provided
the rule enforces object literal methods and properties shorthands.
With "never"
option provided, any shorthand object literal syntax causes an error.
The rule can be configured in a more granular way.
With {"property": "never"}
provided (which is equivalent to {"property": "never", "method": "always"}
),
the rule only flags property shorthand assignments,
and respectively with {"method": "never"}
(equivalent to {"property": "always", "method": "never"}
),
the rule fails only on method shorthands.
Examples
"object-literal-shorthand": true
"object-literal-shorthand": true,never
"object-literal-shorthand": true,[object Object]
Schema
{
"oneOf": [
{
"type": "string",
"enum": [
"never"
]
},
{
"type": "object",
"properties": {
"property": {
"type": "string",
"enum": [
"never"
]
},
"method": {
"type": "string",
"enum": [
"never"
]
}
},
"minProperties": 1,
"maxProperties": 2
}
]
}
For more information see this page.
Identifier 'request_data' is never reassigned; use 'const' instead of 'var'. Open
var request_data = {
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
" should be ' Open
request.setRequestHeader("Authorization", "Basic " + btoa(config.username + ':' + config.password));
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
Identifier 'query' is never reassigned; use 'const' instead of 'var'. Open
var query = new MatchQuery();
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
" should be ' Open
"zero_terms_query": "all"
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var status = 0;
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
non-arrow functions are forbidden Open
describe("xhr test (Match)", function () {
- Read upRead up
- Exclude checks
Rule: only-arrow-functions
Disallows traditional (non-arrow) function expressions.
Note that non-arrow functions are allowed if 'this' appears somewhere in its body (as such functions cannot be converted to arrow functions).
Rationale
Traditional functions don't bind lexical scope, which can lead to unexpected behavior when accessing 'this'.
Config
Two arguments may be optionally provided:
-
"allow-declarations"
allows standalone function declarations. -
"allow-named-functions"
allows the expressionfunction foo() {}
but notfunction() {}
.
Examples
"only-arrow-functions": true
"only-arrow-functions": true,allow-declarations,allow-named-functions
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"allow-declarations",
"allow-named-functions"
]
},
"minLength": 0,
"maxLength": 1
}
For more information see this page.
" should be ' Open
"query": "test_foobar",
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var expectedFormat = {
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var query_data = query.setFormat();
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Expected method shorthand in object literal ('{success() {...}}'). Open
success: function(res) {
- Read upRead up
- Exclude checks
Rule: object-literal-shorthand
Enforces/disallows use of ES6 object literal shorthand.
Notes
- Has Fix
Config
"always"
assumed to be default option, thus with no options provided
the rule enforces object literal methods and properties shorthands.
With "never"
option provided, any shorthand object literal syntax causes an error.
The rule can be configured in a more granular way.
With {"property": "never"}
provided (which is equivalent to {"property": "never", "method": "always"}
),
the rule only flags property shorthand assignments,
and respectively with {"method": "never"}
(equivalent to {"property": "always", "method": "never"}
),
the rule fails only on method shorthands.
Examples
"object-literal-shorthand": true
"object-literal-shorthand": true,never
"object-literal-shorthand": true,[object Object]
Schema
{
"oneOf": [
{
"type": "string",
"enum": [
"never"
]
},
{
"type": "object",
"properties": {
"property": {
"type": "string",
"enum": [
"never"
]
},
"method": {
"type": "string",
"enum": [
"never"
]
}
},
"minProperties": 1,
"maxProperties": 2
}
]
}
For more information see this page.
" should be ' Open
"query": "test_foobar",
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
" should be ' Open
it("Should have returned JSON and Should have atleast 1 record", function () {
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var url = 'https://scalr.api.appbase.io/mirage_test/test/_search';
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
non-arrow functions are forbidden Open
beforeEach(function() {
- Read upRead up
- Exclude checks
Rule: only-arrow-functions
Disallows traditional (non-arrow) function expressions.
Note that non-arrow functions are allowed if 'this' appears somewhere in its body (as such functions cannot be converted to arrow functions).
Rationale
Traditional functions don't bind lexical scope, which can lead to unexpected behavior when accessing 'this'.
Config
Two arguments may be optionally provided:
-
"allow-declarations"
allows standalone function declarations. -
"allow-named-functions"
allows the expressionfunction foo() {}
but notfunction() {}
.
Examples
"only-arrow-functions": true
"only-arrow-functions": true,allow-declarations,allow-named-functions
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"allow-declarations",
"allow-named-functions"
]
},
"minLength": 0,
"maxLength": 1
}
For more information see this page.
Identifier 'format' is never reassigned; use 'const' instead of 'var'. Open
var format = query.setFormat();
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
Identifier 'query_data' is never reassigned; use 'const' instead of 'var'. Open
var query_data = query.setFormat();
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
" should be ' Open
request.setRequestHeader("Authorization", "Basic " + btoa(config.username + ':' + config.password));
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
file should end with a newline Open
});
- Read upRead up
- Exclude checks
Rule: eofline
Ensures the file ends with a newline.
Fix for single-line files is not supported.
Rationale
It is a standard convention to end files with a newline.
Notes
- Has Fix
Config
Not configurable.
Examples
"eofline": true
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var expectedFormatWithOption = {
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var format = query.setFormat();
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var config = {
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
" should be ' Open
"must": [query_data]
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var format = query.setFormat();
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
non-arrow functions are forbidden Open
error: function(xhr) {
- Read upRead up
- Exclude checks
Rule: only-arrow-functions
Disallows traditional (non-arrow) function expressions.
Note that non-arrow functions are allowed if 'this' appears somewhere in its body (as such functions cannot be converted to arrow functions).
Rationale
Traditional functions don't bind lexical scope, which can lead to unexpected behavior when accessing 'this'.
Config
Two arguments may be optionally provided:
-
"allow-declarations"
allows standalone function declarations. -
"allow-named-functions"
allows the expressionfunction foo() {}
but notfunction() {}
.
Examples
"only-arrow-functions": true
"only-arrow-functions": true,allow-declarations,allow-named-functions
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"allow-declarations",
"allow-named-functions"
]
},
"minLength": 0,
"maxLength": 1
}
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var request_data = {
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
non-arrow functions are forbidden Open
beforeSend: function(request) {
- Read upRead up
- Exclude checks
Rule: only-arrow-functions
Disallows traditional (non-arrow) function expressions.
Note that non-arrow functions are allowed if 'this' appears somewhere in its body (as such functions cannot be converted to arrow functions).
Rationale
Traditional functions don't bind lexical scope, which can lead to unexpected behavior when accessing 'this'.
Config
Two arguments may be optionally provided:
-
"allow-declarations"
allows standalone function declarations. -
"allow-named-functions"
allows the expressionfunction foo() {}
but notfunction() {}
.
Examples
"only-arrow-functions": true
"only-arrow-functions": true,allow-declarations,allow-named-functions
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"allow-declarations",
"allow-named-functions"
]
},
"minLength": 0,
"maxLength": 1
}
For more information see this page.
Identifier 'url' is never reassigned; use 'const' instead of 'var'. Open
var url = 'https://scalr.api.appbase.io/mirage_test/test/_search';
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var format = query.setFormat();
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Identifier 'format' is never reassigned; use 'const' instead of 'var'. Open
var format = query.setFormat();
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
Identifier 'expectedFormat' is never reassigned; use 'const' instead of 'var'. Open
var expectedFormat = {
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var query: MatchQuery;
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
" should be ' Open
"zero_terms_query": "all"
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var validJson = isValidJson(JSON.stringify(format));
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Expected method shorthand in object literal ('{error() {...}}'). Open
error: function(xhr) {
- Read upRead up
- Exclude checks
Rule: object-literal-shorthand
Enforces/disallows use of ES6 object literal shorthand.
Notes
- Has Fix
Config
"always"
assumed to be default option, thus with no options provided
the rule enforces object literal methods and properties shorthands.
With "never"
option provided, any shorthand object literal syntax causes an error.
The rule can be configured in a more granular way.
With {"property": "never"}
provided (which is equivalent to {"property": "never", "method": "always"}
),
the rule only flags property shorthand assignments,
and respectively with {"method": "never"}
(equivalent to {"property": "always", "method": "never"}
),
the rule fails only on method shorthands.
Examples
"object-literal-shorthand": true
"object-literal-shorthand": true,never
"object-literal-shorthand": true,[object Object]
Schema
{
"oneOf": [
{
"type": "string",
"enum": [
"never"
]
},
{
"type": "object",
"properties": {
"property": {
"type": "string",
"enum": [
"never"
]
},
"method": {
"type": "string",
"enum": [
"never"
]
}
},
"minProperties": 1,
"maxProperties": 2
}
]
}
For more information see this page.
Identifier 'expectedFormatWithOption' is never reassigned; use 'const' instead of 'var'. Open
var expectedFormatWithOption = {
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
" should be ' Open
"operator" : "and",
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.