Sign upLogin

ashleygwilliams/ashleygwilliams.github.io

View on GitHub
Star

Showing 21 of 21 total issues

Identical blocks of code found in 5 locations. Consider refactoring.
Open

module.exports = {
  post: {
    '/': controller.create({
      schema: schema
    }),
Severity: Major
Found in app/modules/projects/routes.js and 4 other locations - About 6 hrs to fix
app/modules/community/routes.js on lines 4..27
app/modules/presentations/routes.js on lines 4..27
app/modules/users/routes.js on lines 4..27
app/modules/writing/routes.js on lines 4..27

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 170.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 5 locations. Consider refactoring.
Open

module.exports = {
  post: {
    '/': controller.create({
      schema: schema
    }),
Severity: Major
Found in app/modules/presentations/routes.js and 4 other locations - About 6 hrs to fix
app/modules/community/routes.js on lines 4..27
app/modules/projects/routes.js on lines 4..27
app/modules/users/routes.js on lines 4..27
app/modules/writing/routes.js on lines 4..27

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 170.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 5 locations. Consider refactoring.
Open

module.exports = {
  post: {
    '/': controller.create({
      schema: schema
    }),
Severity: Major
Found in app/modules/writing/routes.js and 4 other locations - About 6 hrs to fix
app/modules/community/routes.js on lines 4..27
app/modules/presentations/routes.js on lines 4..27
app/modules/projects/routes.js on lines 4..27
app/modules/users/routes.js on lines 4..27

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 170.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 5 locations. Consider refactoring.
Open

module.exports = {
  post: {
    '/': controller.create({
      schema: schema
    }),
Severity: Major
Found in app/modules/users/routes.js and 4 other locations - About 6 hrs to fix
app/modules/community/routes.js on lines 4..27
app/modules/presentations/routes.js on lines 4..27
app/modules/projects/routes.js on lines 4..27
app/modules/writing/routes.js on lines 4..27

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 170.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 5 locations. Consider refactoring.
Open

module.exports = {
  post: {
    '/': controller.create({
      schema: schema
    }),
Severity: Major
Found in app/modules/community/routes.js and 4 other locations - About 6 hrs to fix
app/modules/presentations/routes.js on lines 4..27
app/modules/projects/routes.js on lines 4..27
app/modules/users/routes.js on lines 4..27
app/modules/writing/routes.js on lines 4..27

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 170.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

module.exports = {
  body: {
    properties: {
      id: {
        type: 'integer'
Severity: Major
Found in app/modules/projects/schema.js and 1 other location - About 2 hrs to fix
app/modules/users/schema.js on lines 1..24

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 90.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

module.exports = {
  body: {
    properties: {
      id: {
        type: 'integer'
Severity: Major
Found in app/modules/users/schema.js and 1 other location - About 2 hrs to fix
app/modules/projects/schema.js on lines 1..24

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 90.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Function seed has 59 lines of code (exceeds 25 allowed). Consider refactoring.
Open

exports.seed = function(knex, Promise) {
    return Promise.join(
        // Deletes ALL existing entries
        knex('presentations').del(),
Severity: Major
Found in seeds/presentations.js - About 2 hrs to fix

    Function seed has 50 lines of code (exceeds 25 allowed). Consider refactoring.
    Open

    exports.seed = function(knex, Promise) {
    return Promise.join(
        // Deletes ALL existing entries
        knex('community').del(),
    Severity: Minor
    Found in seeds/community.js - About 2 hrs to fix

      Function up has 43 lines of code (exceeds 25 allowed). Consider refactoring.
      Open

      exports.up = function (knex) {
  return knex.schema.
    createTable('users', function(t){
      t.increments('id');
      t.text('name').notNullable().unique();
      Severity: Minor
      Found in migrations/portfolio.js - About 1 hr to fix

        Similar blocks of code found in 4 locations. Consider refactoring.
        Open

        const classProps = {
  typeName: 'projects',
  filters: {
    id: function (qb, value) {
      return qb.whereIn('id', value);
        Severity: Major
        Found in app/modules/projects/model.js and 3 other locations - About 1 hr to fix
        app/modules/community/model.js on lines 7..17
        app/modules/presentations/model.js on lines 7..17
        app/modules/writing/model.js on lines 7..17

        Duplicated Code

        Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

        Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

        When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

        Tuning

        This issue has a mass of 67.

        We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

        The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

        If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

        See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

        Refactorings

        Further Reading

        Similar blocks of code found in 4 locations. Consider refactoring.
        Open

        const classProps = {
  typeName: 'writing',
  filters: {
    id: function (qb, value) {
      return qb.whereIn('id', value);
        Severity: Major
        Found in app/modules/writing/model.js and 3 other locations - About 1 hr to fix
        app/modules/community/model.js on lines 7..17
        app/modules/presentations/model.js on lines 7..17
        app/modules/projects/model.js on lines 7..17

        Duplicated Code

        Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

        Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

        When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

        Tuning

        This issue has a mass of 67.

        We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

        The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

        If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

        See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

        Refactorings

        Further Reading

        Similar blocks of code found in 4 locations. Consider refactoring.
        Open

        const classProps = {
  typeName: 'community',
  filters: {
    id: function (qb, value) {
      return qb.whereIn('id', value);
        Severity: Major
        Found in app/modules/community/model.js and 3 other locations - About 1 hr to fix
        app/modules/presentations/model.js on lines 7..17
        app/modules/projects/model.js on lines 7..17
        app/modules/writing/model.js on lines 7..17

        Duplicated Code

        Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

        Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

        When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

        Tuning

        This issue has a mass of 67.

        We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

        The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

        If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

        See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

        Refactorings

        Further Reading

        Similar blocks of code found in 4 locations. Consider refactoring.
        Open

        const classProps = {
  typeName: 'presentations',
  filters: {
    id: function (qb, value) {
      return qb.whereIn('id', value);
        Severity: Major
        Found in app/modules/presentations/model.js and 3 other locations - About 1 hr to fix
        app/modules/community/model.js on lines 7..17
        app/modules/projects/model.js on lines 7..17
        app/modules/writing/model.js on lines 7..17

        Duplicated Code

        Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

        Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

        When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

        Tuning

        This issue has a mass of 67.

        We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

        The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

        If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

        See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

        Refactorings

        Further Reading

        Similar blocks of code found in 2 locations. Consider refactoring.
        Open

                knex('community').insert({
          id: 2, 
          user_id: 1,
          name: 'Papers We Love BOS',
          role: 'organizer',
        Severity: Minor
        Found in seeds/community.js and 1 other location - About 55 mins to fix
        seeds/community.js on lines 46..55

        Duplicated Code

        Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

        Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

        When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

        Tuning

        This issue has a mass of 54.

        We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

        The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

        If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

        See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

        Refactorings

        Further Reading

        Similar blocks of code found in 2 locations. Consider refactoring.
        Open

                knex('community').insert({
          id: 5,
          user_id: 1,
          name: 'BetaNYC',
          role: 'co-organizer and technical director',
        Severity: Minor
        Found in seeds/community.js and 1 other location - About 55 mins to fix
        seeds/community.js on lines 18..27

        Duplicated Code

        Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

        Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

        When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

        Tuning

        This issue has a mass of 54.

        We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

        The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

        If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

        See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

        Refactorings

        Further Reading

        Similar blocks of code found in 2 locations. Consider refactoring.
        Open

                knex('community').insert({
          id: 4,
          user_id: 1,
          name: 'Young Rewired State: Festival of Code',
          role: 'technical mentor and judge',
        Severity: Minor
        Found in seeds/community.js and 1 other location - About 40 mins to fix
        seeds/community.js on lines 28..36

        Duplicated Code

        Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

        Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

        When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

        Tuning

        This issue has a mass of 49.

        We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

        The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

        If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

        See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

        Refactorings

        Further Reading

        Similar blocks of code found in 2 locations. Consider refactoring.
        Open

                knex('community').insert({
          id: 3,
          user_id: 1,
          name: 'Science Club for Girls: Young Leaders in STEM Summer Program',
          role: 'co-instructor and curriculum developer',
        Severity: Minor
        Found in seeds/community.js and 1 other location - About 40 mins to fix
        seeds/community.js on lines 37..45

        Duplicated Code

        Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

        Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

        When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

        Tuning

        This issue has a mass of 49.

        We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

        The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

        If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

        See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

        Refactorings

        Further Reading

        Function makeReq has a Cognitive Complexity of 7 (exceeds 5 allowed). Consider refactoring.
        Open

        var makeReq = function(e) {  
  
  if (e) {
    e.preventDefault();  
  }
        Severity: Minor
        Found in public/js/api-browser.js - About 35 mins to fix

        Cognitive Complexity

        Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

        A method's cognitive complexity is based on a few simple rules:

        • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
        • Code is considered more complex for each "break in the linear flow of the code"
        • Code is considered more complex when "flow breaking structures are nested"

        Further reading

        Similar blocks of code found in 2 locations. Consider refactoring.
        Open

                knex('projects').insert({
          id: 1,
          user_id: 1,
          name: 'endpoints',
          role: 'architecture and documentation',
        Severity: Minor
        Found in seeds/projects.js and 1 other location - About 35 mins to fix
        seeds/presentations.js on lines 9..16

        Duplicated Code

        Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

        Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

        When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

        Tuning

        This issue has a mass of 46.

        We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

        The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

        If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

        See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

        Refactorings

        Further Reading

        Severity
        Category
        Status
        Source
        Language