Sign upLogin

boroivanov/lobo

View on GitHub
Star

Showing 8 of 11 total issues

Cyclomatic complexity is too high in function describe_all_load_balancers. (6)
Open

def describe_all_load_balancers(elb, elbv2, name):
    '''
    Describe both elb and elbv2 load balancers.

    if `name` is not set.
Severity: Minor
Found in lobo/main.py by radon

Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

Source: http://radon.readthedocs.org/en/latest/intro.html

Cyclomatic complexity is too high in function show_toggled_outputs. (6)
Open

def show_toggled_outputs(template, params, **kwargs):
    for key, value in kwargs.items():
        if key == 'scheme' and value:
            template, params = toggle_scheme_output(template, params)
        elif key == 'lb_type' and value:
Severity: Minor
Found in lobo/main.py by radon

Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

Source: http://radon.readthedocs.org/en/latest/intro.html

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    for lb in lbs:
        t = threading.Thread(target=describe_elb, args=(client, lb, q))
        t.start()
        threads.append(t)
Severity: Major
Found in lobo/main.py and 1 other location - About 1 hr to fix
lobo/main.py on lines 120..123

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 42.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    for lb in lbs:
        t = threading.Thread(target=describe_elbv2, args=(client, lb, q))
        t.start()
        threads.append(t)
Severity: Major
Found in lobo/main.py and 1 other location - About 1 hr to fix
lobo/main.py on lines 100..103

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 42.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Function describe_all_load_balancers has a Cognitive Complexity of 8 (exceeds 5 allowed). Consider refactoring.
Open

def describe_all_load_balancers(elb, elbv2, name):
    '''
    Describe both elb and elbv2 load balancers.

    if `name` is not set.
Severity: Minor
Found in lobo/main.py - About 45 mins to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Function loop_load_balancers_pager has a Cognitive Complexity of 7 (exceeds 5 allowed). Consider refactoring.
Open

def loop_load_balancers_pager(client, params, key):
    response = None
    lbs = []
    while True:
        if response:
Severity: Minor
Found in lobo/main.py - About 35 mins to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Function aggregate_health_states has a Cognitive Complexity of 7 (exceeds 5 allowed). Consider refactoring.
Open

def aggregate_health_states(targets):
    '''Aggregate elb or elbv2 health stats'''
    states = {}
    for t in targets:
        if 'TargetHealth' in t:
Severity: Minor
Found in lobo/main.py - About 35 mins to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Ambiguous variable name 'l'
Open

def max_len_value_in_dict(l, key):
Severity: Minor
Found in lobo/main.py by pep8

Never use the characters 'l', 'O', or 'I' as variable names.

In some fonts, these characters are indistinguishable from the
numerals one and zero. When tempted to use 'l', use 'L' instead.

Okay: L = 0
Okay: o = 123
Okay: i = 42
E741: l = 0
E741: O = 123
E741: I = 42

Variables can be bound in several other contexts, including class
and function definitions, 'global' and 'nonlocal' statements,
exception handlers, and 'with' and 'for' statements.
In addition, we have a special handling for function parameters.

Okay: except AttributeError as o:
Okay: with lock as L:
Okay: foo(l=12)
Okay: for a in foo(l=12):
E741: except AttributeError as O:
E741: with lock as l:
E741: global I
E741: nonlocal l
E741: def foo(l):
E741: def foo(l=12):
E741: l = foo(l=12)
E741: for l in range(10):
E742: class I(object):
E743: def l(x):
Severity
Category
Status
Source
Language