Showing 3,238 of 3,238 total issues
Similar blocks of code found in 2 locations. Consider refactoring. Open
hooks.defineLocale('ka', {
months : {
standalone: 'იანვარი_თებერვალი_მარტი_აპრილი_მაისი_ივნისი_ივლისი_აგვისტო_სექტემბერი_ოქტომბერი_ნოემბერი_დეკემბერი'.split('_'),
format: 'იანვარს_თებერვალს_მარტს_აპრილის_მაისს_ივნისს_ივლისს_აგვისტს_სექტემბერს_ოქტომბერს_ნოემბერს_დეკემბერს'.split('_')
},- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 489.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 4 locations. Consider refactoring. Open
moment.defineLocale('bn', {
months : 'জানুয়ারী_ফেব্রুয়ারি_মার্চ_এপ্রিল_মে_জুন_জুলাই_আগস্ট_সেপ্টেম্বর_অক্টোবর_নভেম্বর_ডিসেম্বর'.split('_'),
monthsShort : 'জানু_ফেব_মার্চ_এপ্র_মে_জুন_জুল_আগ_সেপ্ট_অক্টো_নভে_ডিসে'.split('_'),
weekdays : 'রবিবার_সোমবার_মঙ্গলবার_বুধবার_বৃহস্পতিবার_শুক্রবার_শনিবার'.split('_'),
weekdaysShort : 'রবি_সোম_মঙ্গল_বুধ_বৃহস্পতি_শুক্র_শনি'.split('_'),- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 488.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 4 locations. Consider refactoring. Open
moment.defineLocale('bo', {
months : 'ཟླ་བ་དང་པོ_ཟླ་བ་གཉིས་པ_ཟླ་བ་གསུམ་པ_ཟླ་བ་བཞི་པ_ཟླ་བ་ལྔ་པ_ཟླ་བ་དྲུག་པ_ཟླ་བ་བདུན་པ_ཟླ་བ་བརྒྱད་པ_ཟླ་བ་དགུ་པ_ཟླ་བ་བཅུ་པ_ཟླ་བ་བཅུ་གཅིག་པ_ཟླ་བ་བཅུ་གཉིས་པ'.split('_'),
monthsShort : 'ཟླ་བ་དང་པོ_ཟླ་བ་གཉིས་པ_ཟླ་བ་གསུམ་པ_ཟླ་བ་བཞི་པ_ཟླ་བ་ལྔ་པ_ཟླ་བ་དྲུག་པ_ཟླ་བ་བདུན་པ_ཟླ་བ་བརྒྱད་པ_ཟླ་བ་དགུ་པ_ཟླ་བ་བཅུ་པ_ཟླ་བ་བཅུ་གཅིག་པ_ཟླ་བ་བཅུ་གཉིས་པ'.split('_'),
weekdays : 'གཟའ་ཉི་མ་_གཟའ་ཟླ་བ་_གཟའ་མིག་དམར་_གཟའ་ལྷག་པ་_གཟའ་ཕུར་བུ_གཟའ་པ་སངས་_གཟའ་སྤེན་པ་'.split('_'),
weekdaysShort : 'ཉི་མ་_ཟླ་བ་_མིག་དམར་_ལྷག་པ་_ཕུར་བུ_པ་སངས་_སྤེན་པ་'.split('_'),- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 488.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 4 locations. Consider refactoring. Open
hooks.defineLocale('bn', {
months : 'জানুয়ারী_ফেব্রুয়ারি_মার্চ_এপ্রিল_মে_জুন_জুলাই_আগস্ট_সেপ্টেম্বর_অক্টোবর_নভেম্বর_ডিসেম্বর'.split('_'),
monthsShort : 'জানু_ফেব_মার্চ_এপ্র_মে_জুন_জুল_আগ_সেপ্ট_অক্টো_নভে_ডিসে'.split('_'),
weekdays : 'রবিবার_সোমবার_মঙ্গলবার_বুধবার_বৃহস্পতিবার_শুক্রবার_শনিবার'.split('_'),
weekdaysShort : 'রবি_সোম_মঙ্গল_বুধ_বৃহস্পতি_শুক্র_শনি'.split('_'),- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 488.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 4 locations. Consider refactoring. Open
hooks.defineLocale('bo', {
months : 'ཟླ་བ་དང་པོ_ཟླ་བ་གཉིས་པ_ཟླ་བ་གསུམ་པ_ཟླ་བ་བཞི་པ_ཟླ་བ་ལྔ་པ_ཟླ་བ་དྲུག་པ_ཟླ་བ་བདུན་པ_ཟླ་བ་བརྒྱད་པ_ཟླ་བ་དགུ་པ_ཟླ་བ་བཅུ་པ_ཟླ་བ་བཅུ་གཅིག་པ_ཟླ་བ་བཅུ་གཉིས་པ'.split('_'),
monthsShort : 'ཟླ་བ་དང་པོ_ཟླ་བ་གཉིས་པ_ཟླ་བ་གསུམ་པ_ཟླ་བ་བཞི་པ_ཟླ་བ་ལྔ་པ_ཟླ་བ་དྲུག་པ_ཟླ་བ་བདུན་པ_ཟླ་བ་བརྒྱད་པ_ཟླ་བ་དགུ་པ_ཟླ་བ་བཅུ་པ_ཟླ་བ་བཅུ་གཅིག་པ_ཟླ་བ་བཅུ་གཉིས་པ'.split('_'),
weekdays : 'གཟའ་ཉི་མ་_གཟའ་ཟླ་བ་_གཟའ་མིག་དམར་_གཟའ་ལྷག་པ་_གཟའ་ཕུར་བུ_གཟའ་པ་སངས་_གཟའ་སྤེན་པ་'.split('_'),
weekdaysShort : 'ཉི་མ་_ཟླ་བ་_མིག་དམར་_ལྷག་པ་_ཕུར་བུ_པ་སངས་_སྤེན་པ་'.split('_'),- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 488.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 3 locations. Consider refactoring. Open
jQuery.fn.extend( {
wrapAll: function( html ) {
var wrap;
if ( this[ 0 ] ) {- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 487.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 3 locations. Consider refactoring. Open
jQuery.fn.extend( {
wrapAll: function( html ) {
var wrap;
if ( this[ 0 ] ) {- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 487.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 3 locations. Consider refactoring. Open
jQuery.fn.extend( {
wrapAll: function( html ) {
var wrap;
if ( this[ 0 ] ) {- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 487.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
export default moment.defineLocale('bo', {
months : 'ཟླ་བ་དང་པོ_ཟླ་བ་གཉིས་པ_ཟླ་བ་གསུམ་པ_ཟླ་བ་བཞི་པ_ཟླ་བ་ལྔ་པ_ཟླ་བ་དྲུག་པ_ཟླ་བ་བདུན་པ_ཟླ་བ་བརྒྱད་པ_ཟླ་བ་དགུ་པ_ཟླ་བ་བཅུ་པ_ཟླ་བ་བཅུ་གཅིག་པ_ཟླ་བ་བཅུ་གཉིས་པ'.split('_'),
monthsShort : 'ཟླ་བ་དང་པོ_ཟླ་བ་གཉིས་པ_ཟླ་བ་གསུམ་པ_ཟླ་བ་བཞི་པ_ཟླ་བ་ལྔ་པ_ཟླ་བ་དྲུག་པ_ཟླ་བ་བདུན་པ_ཟླ་བ་བརྒྱད་པ_ཟླ་བ་དགུ་པ_ཟླ་བ་བཅུ་པ_ཟླ་བ་བཅུ་གཅིག་པ_ཟླ་བ་བཅུ་གཉིས་པ'.split('_'),
weekdays : 'གཟའ་ཉི་མ་_གཟའ་ཟླ་བ་_གཟའ་མིག་དམར་_གཟའ་ལྷག་པ་_གཟའ་ཕུར་བུ_གཟའ་པ་སངས་_གཟའ་སྤེན་པ་'.split('_'),
weekdaysShort : 'ཉི་མ་_ཟླ་བ་_མིག་དམར་_ལྷག་པ་_ཕུར་བུ_པ་སངས་_སྤེན་པ་'.split('_'),- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 484.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
export default moment.defineLocale('bn', {
months : 'জানুয়ারী_ফেব্রুয়ারি_মার্চ_এপ্রিল_মে_জুন_জুলাই_আগস্ট_সেপ্টেম্বর_অক্টোবর_নভেম্বর_ডিসেম্বর'.split('_'),
monthsShort : 'জানু_ফেব_মার্চ_এপ্র_মে_জুন_জুল_আগ_সেপ্ট_অক্টো_নভে_ডিসে'.split('_'),
weekdays : 'রবিবার_সোমবার_মঙ্গলবার_বুধবার_বৃহস্পতিবার_শুক্রবার_শনিবার'.split('_'),
weekdaysShort : 'রবি_সোম_মঙ্গল_বুধ_বৃহস্পতি_শুক্র_শনি'.split('_'),- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 484.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
Tween.prototype = {
constructor: Tween,
init: function( elem, options, prop, end, easing, unit ) {
this.elem = elem;
this.prop = prop;- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 478.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
Tween.prototype = {
constructor: Tween,
init: function( elem, options, prop, end, easing, unit ) {
this.elem = elem;
this.prop = prop;- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 478.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
moment.defineLocale('es', {
months : 'enero_febrero_marzo_abril_mayo_junio_julio_agosto_septiembre_octubre_noviembre_diciembre'.split('_'),
monthsShort : function (m, format) {
if (/-MMM-/.test(format)) {
return monthsShort$2[m.month()];- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 477.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
hooks.defineLocale('es', {
months : 'enero_febrero_marzo_abril_mayo_junio_julio_agosto_septiembre_octubre_noviembre_diciembre'.split('_'),
monthsShort : function (m, format) {
if (/-MMM-/.test(format)) {
return monthsShort$2[m.month()];- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 477.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
moment.defineLocale('es-do', {
months : 'enero_febrero_marzo_abril_mayo_junio_julio_agosto_septiembre_octubre_noviembre_diciembre'.split('_'),
monthsShort : function (m, format) {
if (/-MMM-/.test(format)) {
return monthsShort$1[m.month()];- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 476.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
hooks.defineLocale('es-do', {
months : 'enero_febrero_marzo_abril_mayo_junio_julio_agosto_septiembre_octubre_noviembre_diciembre'.split('_'),
monthsShort : function (m, format) {
if (/-MMM-/.test(format)) {
return monthsShort$1[m.month()];- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 476.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 4 locations. Consider refactoring. Open
moment.defineLocale('mk', {
months : 'јануари_февруари_март_април_мај_јуни_јули_август_септември_октомври_ноември_декември'.split('_'),
monthsShort : 'јан_фев_мар_апр_мај_јун_јул_авг_сеп_окт_ное_дек'.split('_'),
weekdays : 'недела_понеделник_вторник_среда_четврток_петок_сабота'.split('_'),
weekdaysShort : 'нед_пон_вто_сре_чет_пет_саб'.split('_'),- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 475.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 4 locations. Consider refactoring. Open
moment.defineLocale('bg', {
months : 'януари_февруари_март_април_май_юни_юли_август_септември_октомври_ноември_декември'.split('_'),
monthsShort : 'янр_фев_мар_апр_май_юни_юли_авг_сеп_окт_ное_дек'.split('_'),
weekdays : 'неделя_понеделник_вторник_сряда_четвъртък_петък_събота'.split('_'),
weekdaysShort : 'нед_пон_вто_сря_чет_пет_съб'.split('_'),- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 475.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 4 locations. Consider refactoring. Open
hooks.defineLocale('mk', {
months : 'јануари_февруари_март_април_мај_јуни_јули_август_септември_октомври_ноември_декември'.split('_'),
monthsShort : 'јан_фев_мар_апр_мај_јун_јул_авг_сеп_окт_ное_дек'.split('_'),
weekdays : 'недела_понеделник_вторник_среда_четврток_петок_сабота'.split('_'),
weekdaysShort : 'нед_пон_вто_сре_чет_пет_саб'.split('_'),- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 475.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 4 locations. Consider refactoring. Open
hooks.defineLocale('bg', {
months : 'януари_февруари_март_април_май_юни_юли_август_септември_октомври_ноември_декември'.split('_'),
monthsShort : 'янр_фев_мар_апр_май_юни_юли_авг_сеп_окт_ное_дек'.split('_'),
weekdays : 'неделя_понеделник_вторник_сряда_четвъртък_петък_събота'.split('_'),
weekdaysShort : 'нед_пон_вто_сря_чет_пет_съб'.split('_'),- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 475.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76