Sign upLogin

cea-sec/miasm

View on GitHub
Star

Showing 3,020 of 3,020 total issues

Identical blocks of code found in 2 locations. Consider refactoring.
Open

                    if n_r in current_nodes:
                        node_n_r = current_nodes[n_r]
                    else:
                        node_n_r = get_node_name(irb.loc_key, i, n_r)
                        current_nodes[n_r] = node_n_r
Severity: Major
Found in miasm/analysis/data_analysis.py and 1 other location - About 2 hrs to fix
miasm/analysis/data_analysis.py on lines 52..57

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 57.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

aarch64op("stxrb", [bs('0'), bs('0'), bs('001000'), bs('0'), bs('0'), bs('0'), rs32, bs('0'), bs('11111'), rn64_deref_nooff, rt32], [rs32, rt32, rn64_deref_nooff])
Severity: Major
Found in miasm/arch/aarch64/arch.py and 3 other locations - About 2 hrs to fix
miasm/arch/aarch64/arch.py on lines 2279..2279
miasm/arch/aarch64/arch.py on lines 2297..2297
miasm/arch/aarch64/arch.py on lines 2298..2298

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 57.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

aarch64op("stlxrh",[bs('0'), bs('1'), bs('001000'), bs('0'), bs('0'), bs('0'), rs32, bs('1'), bs('11111'), rn64_deref_nooff, rt32], [rs32, rt32, rn64_deref_nooff])
Severity: Major
Found in miasm/arch/aarch64/arch.py and 3 other locations - About 2 hrs to fix
miasm/arch/aarch64/arch.py on lines 2276..2276
miasm/arch/aarch64/arch.py on lines 2279..2279
miasm/arch/aarch64/arch.py on lines 2297..2297

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 57.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Function compute_dominance_frontier has a Cognitive Complexity of 19 (exceeds 5 allowed). Consider refactoring.
Open

    def compute_dominance_frontier(self, head):
        """
        Compute the dominance frontier of the graph

        Source: Cooper, Keith D., Timothy J. Harvey, and Ken Kennedy.
Severity: Minor
Found in miasm/core/graph.py - About 2 hrs to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

aarch64op("fcmpe", [bs('000'), bs('11110'), bs('0'), sdsize1, bs('1'), sdm_32_64_zero, bs('00'), bs('1000'), sdn_32_64, bs('1'), opc, bs('000')], [sdn_32_64, sdm_32_64_zero])
Severity: Major
Found in miasm/arch/aarch64/arch.py and 1 other location - About 2 hrs to fix
miasm/arch/aarch64/arch.py on lines 2168..2168

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 57.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if getattr(self.parent, "imm7_align4", False):

            # Get the integer and check the upper bound
            v = int(self.expr.ptr.args[1].arg)
            if v > 0x80:
Severity: Major
Found in miasm/arch/mep/arch.py and 1 other location - About 2 hrs to fix
miasm/arch/mep/arch.py on lines 787..797

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 57.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        elif getattr(self.parent, "disp7_align2", False):

            # Get the integer and check the upper bound
            v = int(self.expr.ptr.args[1].arg)
            if v > 0x80:
Severity: Major
Found in miasm/arch/mep/arch.py and 1 other location - About 2 hrs to fix
miasm/arch/mep/arch.py on lines 763..773

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 57.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

aarch64op("fcmp",  [bs('000'), bs('11110'), bs('0'), sdsize1, bs('1'), sdm_32_64_zero, bs('00'), bs('1000'), sdn_32_64, bs('0'), opc, bs('000')], [sdn_32_64, sdm_32_64_zero])
Severity: Major
Found in miasm/arch/aarch64/arch.py and 1 other location - About 2 hrs to fix
miasm/arch/aarch64/arch.py on lines 2169..2169

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 57.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

def kernel32_GetSystemInfo(jitter):
    ret_ad, args = jitter.func_args_stdcall(["sys_ptr"])
    sysinfo = systeminfo()
    jitter.vm.set_mem(args.sys_ptr, sysinfo.pack())
    jitter.func_ret_stdcall(ret_ad, 0)
Severity: Major
Found in miasm/os_dep/win_api_x86_32.py and 1 other location - About 2 hrs to fix
miasm/os_dep/win_api_x86_32.py on lines 3182..3186

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 57.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

aarch64op("ucvtf", [sf, bs('0'), bs('0'), bs('11110'), bs('0'), sdsize1, bs('1'), bs('00'), bs('011'), bs('000000'), rn, sdd_32_64], [sdd_32_64, rn])
Severity: Major
Found in miasm/arch/aarch64/arch.py and 1 other location - About 2 hrs to fix
miasm/arch/aarch64/arch.py on lines 2213..2213

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 57.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

aarch64op("scvtf", [sf, bs('0'), bs('0'), bs('11110'), bs('0'), sdsize1, bs('1'), bs('00'), bs('010'), bs('000000'), rn, sdd_32_64], [sdd_32_64, rn])
Severity: Major
Found in miasm/arch/aarch64/arch.py and 1 other location - About 2 hrs to fix
miasm/arch/aarch64/arch.py on lines 2214..2214

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 57.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            if dst.size <= self.translator.NATIVE_INT_MAX_SIZE:
                c_var.append("uint%d_t %s;" % (new_dst.size, new_dst))
            else:
                c_var.append("bn_t %s; // %d" % (new_dst, new_dst.size))
Severity: Major
Found in miasm/jitter/codegen.py and 1 other location - About 2 hrs to fix
miasm/jitter/codegen.py on lines 256..260

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 57.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        for var in viewvalues(prefetchers):
            if var.size <= self.translator.NATIVE_INT_MAX_SIZE:
                c_var.append("uint%d_t %s;" % (var.size, var))
            else:
                c_var.append("bn_t %s; // %d" % (var, var.size))
Severity: Major
Found in miasm/jitter/codegen.py and 1 other location - About 2 hrs to fix
miasm/jitter/codegen.py on lines 312..315

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 57.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

def kernel32_GetNativeSystemInfo(jitter):
    ret_ad, args = jitter.func_args_stdcall(["sys_ptr"])
    sysinfo = systeminfo()
    jitter.vm.set_mem(args.sys_ptr, sysinfo.pack())
    jitter.func_ret_stdcall(ret_ad, 0)
Severity: Major
Found in miasm/os_dep/win_api_x86_32.py and 1 other location - About 2 hrs to fix
miasm/os_dep/win_api_x86_32.py on lines 1128..1132

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 57.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

File simplifier.py has 272 lines of code (exceeds 250 allowed). Consider refactoring.
Open

"""
Apply simplification passes to an IR cfg
"""

import logging
Severity: Minor
Found in miasm/analysis/simplifier.py - About 2 hrs to fix

    Identical blocks of code found in 2 locations. Consider refactoring.
    Open

        if args.initowner:
        if name in winobjs.mutex:
            raise NotImplementedError("Untested case")
            # ret = 0
        else:
    Severity: Major
    Found in miasm/os_dep/win_api_x86_32.py and 1 other location - About 2 hrs to fix
    miasm/os_dep/win_api_x86_32.py on lines 952..965

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 56.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 3 locations. Consider refactoring.
    Open

    for t in 'B', 'H', 'I', 'Q':
    s = struct.calcsize(t)
    type2realtype[t] = s * 8
    size2type[s * 8] = t
    Severity: Major
    Found in miasm/loader/new_cstruct.py and 2 other locations - About 2 hrs to fix
    miasm/loader/cstruct.py on lines 12..15
    miasm/loader/new_cstruct.py on lines 19..22

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 56.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 5 locations. Consider refactoring.
    Open

    aarch64op("ldaxp",[bs('1'), sf, bs('001000'), bs('0'), bs('1'), bs('1'), bs('11111'), bs('1'), bs('11111'), rn64_deref_nooff, rt], [rt, rn64_deref_nooff])
    Severity: Major
    Found in miasm/arch/aarch64/arch.py and 4 other locations - About 2 hrs to fix
    miasm/arch/aarch64/arch.py on lines 2273..2273
    miasm/arch/aarch64/arch.py on lines 2286..2286
    miasm/arch/aarch64/arch.py on lines 2290..2290
    miasm/arch/aarch64/arch.py on lines 2292..2292

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 56.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 3 locations. Consider refactoring.
    Open

    for t in 'b', 'h', 'i', 'q':
    s = struct.calcsize(t)
    type2realtype[t] = s * 8
    size2type_s[s * 8] = t
    Severity: Major
    Found in miasm/loader/new_cstruct.py and 2 other locations - About 2 hrs to fix
    miasm/loader/cstruct.py on lines 12..15
    miasm/loader/new_cstruct.py on lines 14..17

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 56.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 5 locations. Consider refactoring.
    Open

    aarch64op("ldar", [bs('1'), sf, bs('001000'), bs('1'), bs('1'), bs('0'), bs('11111'), bs('1'), bs('11111'), rn64_deref_nooff, rt], [rt, rn64_deref_nooff])
    Severity: Major
    Found in miasm/arch/aarch64/arch.py and 4 other locations - About 2 hrs to fix
    miasm/arch/aarch64/arch.py on lines 2273..2273
    miasm/arch/aarch64/arch.py on lines 2289..2289
    miasm/arch/aarch64/arch.py on lines 2290..2290
    miasm/arch/aarch64/arch.py on lines 2292..2292

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 56.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Severity
    Category
    Status
    Source
    Language