Similar blocks of code found in 2 locations. Consider refactoring. Open
def bs_horizontal_simple_form_for(path, options = {}, &block)
bootstrap_options = {
wrapper: :bootstrap_horizontal_form,
wrapper_mappings: {
boolean: :bootstrap_horizontal_boolean,
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 37.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
def bs_vertical_simple_form(path, options = {}, &block)
bootstrap_options = {
wrapper: :bootstrap_vertical_form,
wrapper_mappings: {
boolean: :bootstrap_vertical_boolean,
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 37.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Align the elements of a hash literal if they span more than one line. Open
range: :bootstrap_vertical_range,
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
- ignore_explicit (with curly braces)
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Align the elements of a hash literal if they span more than one line. Open
datetime: :bootstrap_vertical_multi_select,
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
- ignore_explicit (with curly braces)
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Align the elements of a hash literal if they span more than one line. Open
datetime: :bootstrap_horizontal_multi_select,
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
- ignore_explicit (with curly braces)
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Align the elements of a hash literal if they span more than one line. Open
file: :bootstrap_vertical_file,
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
- ignore_explicit (with curly braces)
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Align the elements of a hash literal if they span more than one line. Open
check_boxes: :bootstrap_vertical_collection,
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
- ignore_explicit (with curly braces)
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Align the elements of a hash literal if they span more than one line. Open
time: :bootstrap_horizontal_multi_select
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
- ignore_explicit (with curly braces)
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Align the elements of a hash literal if they span more than one line. Open
range: :bootstrap_horizontal_range,
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
- ignore_explicit (with curly braces)
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Align the elements of a hash literal if they span more than one line. Open
date: :bootstrap_horizontal_multi_select,
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
- ignore_explicit (with curly braces)
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Align the elements of a hash literal if they span more than one line. Open
check_boxes: :bootstrap_horizontal_collection,
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
- ignore_explicit (with curly braces)
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Align the elements of a hash literal if they span more than one line. Open
boolean: :bootstrap_vertical_boolean,
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
- ignore_explicit (with curly braces)
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Align the elements of a hash literal if they span more than one line. Open
date: :bootstrap_vertical_multi_select,
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
- ignore_explicit (with curly braces)
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Align the elements of a hash literal if they span more than one line. Open
file: :bootstrap_horizontal_file,
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
- ignore_explicit (with curly braces)
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Align the elements of a hash literal if they span more than one line. Open
time: :bootstrap_vertical_multi_select
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
- ignore_explicit (with curly braces)
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Align the elements of a hash literal if they span more than one line. Open
boolean: :bootstrap_horizontal_boolean,
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
- ignore_explicit (with curly braces)
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})