Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 77.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 76.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 76.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 76.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 76.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

enforce a maximum number of statements allowed in function blocks (max-statements)

The max-statements rule allows you to specify the maximum number of statements allowed in a function.

function foo() {
  var bar = 1; // one statement
  var baz = 2; // two statements
  var qux = 3; // three statements
}

Rule Details

This rule enforces a maximum number of statements allowed in function blocks.

Options

This rule has a number or object option:

• "max" (default 10) enforces a maximum number of statements allows in function blocks

Deprecated: The object property maximum is deprecated; please use the object property max instead.

This rule has an object option:

• "ignoreTopLevelFunctions": true ignores top-level functions

max

Examples of incorrect code for this rule with the default { "max": 10 } option:

/*eslint max-statements: ["error", 10]*/
/*eslint-env es6*/

function foo() {
  var foo1 = 1;
  var foo2 = 2;
  var foo3 = 3;
  var foo4 = 4;
  var foo5 = 5;
  var foo6 = 6;
  var foo7 = 7;
  var foo8 = 8;
  var foo9 = 9;
  var foo10 = 10;

  var foo11 = 11; // Too many.
}

let foo = () => {
  var foo1 = 1;
  var foo2 = 2;
  var foo3 = 3;
  var foo4 = 4;
  var foo5 = 5;
  var foo6 = 6;
  var foo7 = 7;
  var foo8 = 8;
  var foo9 = 9;
  var foo10 = 10;

  var foo11 = 11; // Too many.
};

Examples of correct code for this rule with the default { "max": 10 } option:

/*eslint max-statements: ["error", 10]*/
/*eslint-env es6*/

function foo() {
  var foo1 = 1;
  var foo2 = 2;
  var foo3 = 3;
  var foo4 = 4;
  var foo5 = 5;
  var foo6 = 6;
  var foo7 = 7;
  var foo8 = 8;
  var foo9 = 9;
  var foo10 = 10;
  return function () {

    // The number of statements in the inner function does not count toward the
    // statement maximum.

    return 42;
  };
}

let foo = () => {
  var foo1 = 1;
  var foo2 = 2;
  var foo3 = 3;
  var foo4 = 4;
  var foo5 = 5;
  var foo6 = 6;
  var foo7 = 7;
  var foo8 = 8;
  var foo9 = 9;
  var foo10 = 10;
  return function () {

    // The number of statements in the inner function does not count toward the
    // statement maximum.

    return 42;
  };
}

ignoreTopLevelFunctions

Examples of additional correct code for this rule with the { "max": 10 }, { "ignoreTopLevelFunctions": true } options:

/*eslint max-statements: ["error", 10, { "ignoreTopLevelFunctions": true }]*/

function foo() {
  var foo1 = 1;
  var foo2 = 2;
  var foo3 = 3;
  var foo4 = 4;
  var foo5 = 5;
  var foo6 = 6;
  var foo7 = 7;
  var foo8 = 8;
  var foo9 = 9;
  var foo10 = 10;
  var foo11 = 11;
}

Related Rules

• [complexity](complexity.md)
• [max-depth](max-depth.md)
• [max-len](max-len.md)
• [max-nested-callbacks](max-nested-callbacks.md)
• [max-params](max-params.md) Source: http://eslint.org/docs/rules/

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 74.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 74.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Limit Cyclomatic Complexity (complexity)

Cyclomatic complexity measures the number of linearly independent paths through a program's source code. This rule allows setting a cyclomatic complexity threshold.

function a(x) {
    if (true) {
        return x; // 1st path
    } else if (false) {
        return x+1; // 2nd path
    } else {
        return 4; // 3rd path
    }
}

Rule Details

This rule is aimed at reducing code complexity by capping the amount of cyclomatic complexity allowed in a program. As such, it will warn when the cyclomatic complexity crosses the configured threshold (default is 20).

Examples of incorrect code for a maximum of 2:

/*eslint complexity: ["error", 2]*/

function a(x) {
    if (true) {
        return x;
    } else if (false) {
        return x+1;
    } else {
        return 4; // 3rd path
    }
}

Examples of correct code for a maximum of 2:

/*eslint complexity: ["error", 2]*/

function a(x) {
    if (true) {
        return x;
    } else {
        return 4;
    }
}

Options

Optionally, you may specify a max object property:

"complexity": ["error", 2]

is equivalent to

"complexity": ["error", { "max": 2 }]

Deprecated: the object property maximum is deprecated. Please use the property max instead.

When Not To Use It

If you can't determine an appropriate complexity limit for your code, then it's best to disable this rule.

Further Reading

• About Complexity
• Complexity Analysis of JavaScript Code

Related Rules

• [max-depth](max-depth.md)
• [max-len](max-len.md)
• [max-nested-callbacks](max-nested-callbacks.md)
• [max-params](max-params.md)
• [max-statements](max-statements.md) Source: http://eslint.org/docs/rules/

Limit Cyclomatic Complexity (complexity)

Cyclomatic complexity measures the number of linearly independent paths through a program's source code. This rule allows setting a cyclomatic complexity threshold.

function a(x) {
    if (true) {
        return x; // 1st path
    } else if (false) {
        return x+1; // 2nd path
    } else {
        return 4; // 3rd path
    }
}

Rule Details

This rule is aimed at reducing code complexity by capping the amount of cyclomatic complexity allowed in a program. As such, it will warn when the cyclomatic complexity crosses the configured threshold (default is 20).

Examples of incorrect code for a maximum of 2:

/*eslint complexity: ["error", 2]*/

function a(x) {
    if (true) {
        return x;
    } else if (false) {
        return x+1;
    } else {
        return 4; // 3rd path
    }
}

Examples of correct code for a maximum of 2:

/*eslint complexity: ["error", 2]*/

function a(x) {
    if (true) {
        return x;
    } else {
        return 4;
    }
}

Options

Optionally, you may specify a max object property:

"complexity": ["error", 2]

is equivalent to

"complexity": ["error", { "max": 2 }]

Deprecated: the object property maximum is deprecated. Please use the property max instead.

When Not To Use It

If you can't determine an appropriate complexity limit for your code, then it's best to disable this rule.

Further Reading

• About Complexity
• Complexity Analysis of JavaScript Code

Related Rules

• [max-depth](max-depth.md)
• [max-len](max-len.md)
• [max-nested-callbacks](max-nested-callbacks.md)
• [max-params](max-params.md)
• [max-statements](max-statements.md) Source: http://eslint.org/docs/rules/

Limit Cyclomatic Complexity (complexity)

Cyclomatic complexity measures the number of linearly independent paths through a program's source code. This rule allows setting a cyclomatic complexity threshold.

function a(x) {
    if (true) {
        return x; // 1st path
    } else if (false) {
        return x+1; // 2nd path
    } else {
        return 4; // 3rd path
    }
}

Rule Details

This rule is aimed at reducing code complexity by capping the amount of cyclomatic complexity allowed in a program. As such, it will warn when the cyclomatic complexity crosses the configured threshold (default is 20).

Examples of incorrect code for a maximum of 2:

/*eslint complexity: ["error", 2]*/

function a(x) {
    if (true) {
        return x;
    } else if (false) {
        return x+1;
    } else {
        return 4; // 3rd path
    }
}

Examples of correct code for a maximum of 2:

/*eslint complexity: ["error", 2]*/

function a(x) {
    if (true) {
        return x;
    } else {
        return 4;
    }
}

Options

Optionally, you may specify a max object property:

"complexity": ["error", 2]

is equivalent to

"complexity": ["error", { "max": 2 }]

Deprecated: the object property maximum is deprecated. Please use the property max instead.

When Not To Use It

If you can't determine an appropriate complexity limit for your code, then it's best to disable this rule.

Further Reading

• About Complexity
• Complexity Analysis of JavaScript Code

Related Rules

• [max-depth](max-depth.md)
• [max-len](max-len.md)
• [max-nested-callbacks](max-nested-callbacks.md)
• [max-params](max-params.md)
• [max-statements](max-statements.md) Source: http://eslint.org/docs/rules/

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 67.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 67.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76