rails/config/initializers/devise.rb
# loads OmniAuth::Strategies::Schoology for omniauth configuration
require File.expand_path("../../../lib/omni_auth/strategies/schoology", __FILE__)
# loads OmniAuth::Strategies::PortalGoogle for omniauth configuration
require File.expand_path("../../../lib/omni_auth/strategies/portal_google", __FILE__)
# Use this hook to configure devise mailer, warden hooks and so forth.
# Many of these configuration options can be set straight in your model.
Devise.setup do |config|
config.secret_key = ENV.fetch('DEVISE_SECRET_KEY', '71120fd5d876abea0bd88b933416dac4423afc9a5f7ccd591fe4b5d7bf32752b376c51a6cdb8dcba30be125ca75e59679a41b19804516313ccf4c813d74f37bb')
# ==> Mailer Configuration
# Configure the e-mail address which will be shown in Devise::Mailer,
# note that it will be overwritten if you use your own mailer class with default "from" parameter.
config.mailer_sender = "admin@concord.org"
# Configure the class responsible to send e-mails.
config.mailer = "UserMailer"
# ==> ORM configuration
# Load and configure the ORM. Supports :active_record (default) and
# :mongoid (bson_ext recommended) by default. Other ORMs may be
# available as additional gems.
require 'devise/orm/active_record'
# ==> Configuration for any authentication mechanism
# Configure which keys are used when authenticating a user. The default is
# just :email. You can configure it to use [:username, :subdomain], so for
# authenticating a user, both parameters are required. Remember that those
# parameters are used only when authenticating and not when retrieving from
# session. If you need permissions, you should implement that in a before filter.
# You can also supply a hash where the value is a boolean determining whether
# or not authentication should be aborted when the value is not present.
config.authentication_keys = [ :login ]
# Configure parameters from the request object used for authentication. Each entry
# given should be a request method and it will automatically be passed to the
# find_for_authentication method and considered in your model lookup. For instance,
# if you set :request_keys to [:subdomain], :subdomain will be used on authentication.
# The same considerations mentioned for authentication_keys also apply to request_keys.
# config.request_keys = []
# Configure which authentication keys should be case-insensitive.
# These keys will be downcased upon creating or modifying a user and when used
# to authenticate or find a user. Default is :email.
config.case_insensitive_keys = [ :email ]
# Configure which authentication keys should have whitespace stripped.
# These keys will have whitespace before and after removed upon creating or
# modifying a user and when used to authenticate or find a user. Default is :email.
config.strip_whitespace_keys = [ :email ]
# Tell if authentication through request.params is enabled. True by default.
# It can be set to an array that will enable params authentication only for the
# given strategies, for example, `config.params_authenticatable = [:database]` will
# enable it only for database (email + password) authentication.
# config.params_authenticatable = true
# Tell if authentication through HTTP Basic Auth is enabled. False by default.
# It can be set to an array that will enable http authentication only for the
# given strategies, for example, `config.http_authenticatable = [:token]` will
# enable it only for token authentication.
# config.http_authenticatable = false
# If http headers should be returned for AJAX requests. True by default.
# config.http_authenticatable_on_xhr = true
# The realm used in Http Basic Authentication. "Application" by default.
# config.http_authentication_realm = "Application"
# It will change confirmation, password recovery and other workflows
# to behave the same regardless if the e-mail provided was right or wrong.
# Does not affect registerable.
# config.paranoid = true
# By default Devise will store the user in session. You can skip storage for
# :http_auth and :token_auth by adding those symbols to the array below.
# Notice that if you are skipping storage for all authentication paths, you
# may want to disable generating routes to Devise's sessions controller by
# passing :skip => :sessions to `devise_for` in your config/routes.rb
config.skip_session_storage = [:http_auth]
# ==> Configuration for :database_authenticatable
# For bcrypt, this is the cost for hashing the password and defaults to 10. If
# using other encryptors, it sets how many times you want the password re-encrypted.
#
# Limiting the stretches to just one in testing will increase the performance of
# your test suite dramatically. However, it is STRONGLY RECOMMENDED to not use
# a value less than 10 in other environments.
config.stretches = (Rails.env.development? || Rails.env.production? || Rails.env.staging?) ? 10 : 1
#config.stretches = 10
# Setup a pepper to generate the encrypted password.
# config.pepper = "c035da42b7b4b6cf6b985bebab88a20d78f62c6593f818992be75dca07cf7f6ad9bf983ee8b71ed56354487055fb8ffba683dca86b80f31072ca8692f55dfbc1"
# In order to run the user specs the encrypted passwords
# for the 'quentin' and 'aaron' users in spec/fixtures/users.yml
# need to be created with a hard-coded pepper used during testing.
config.pepper = (Rails.env.development? || Rails.env.production? || Rails.env.staging?) ? APP_CONFIG[:pepper] : 'sitekeyforrunningtests'
# ==> Configuration for :confirmable
# A period that the user is allowed to access the website even without
# confirming his account. For instance, if set to 2.days, the user will be
# able to access the website for two days without confirming his account,
# access will be blocked just in the third day. Default is 0.days, meaning
# the user cannot access the website without confirming his account.
# config.allow_unconfirmed_access_for = 2.days
# If true, requires any email changes to be confirmed (exactly the same way as
# initial account confirmation) to be applied. Requires additional unconfirmed_email
# db field (see migrations). Until confirmed new email is stored in
# unconfirmed email column, and copied to email column on successful confirmation.
config.reconfirmable = false
# Defines which key will be used when confirming an account
config.confirmation_keys = [ :email ]
# ==> Configuration for :rememberable
# The time the user will be remembered without asking for credentials again.
# config.remember_for = 2.weeks
# If true, extends the user's remember period when remembered via cookie.
# config.extend_remember_period = false
# Options to be passed to the created cookie. For instance, you can set
# :secure => true in order to force SSL only cookies.
# config.rememberable_options = {}
# ==> Configuration for :validatable
# Range for password length. Default is 6..128.
# config.password_length = 6..128
# Email regex used to validate email formats. It simply asserts that
# an one (and only one) @ exists in the given string. This is mainly
# to give user feedback and not to assert the e-mail validity.
# RAILS 5: needed to set to remove deprecation warning. This is the current behavior according to the warning.
config.email_regexp = /\A[^@\s]+@([^@\s]+\.)+[^@\W]+\z/
# ==> Configuration for :timeoutable
# The time you want to timeout the user session without activity. After this
# time the user will be asked for credentials again. Default is 30 minutes.
config.timeout_in = 90.minutes
# If true, expires auth token on session timeout.
# config.expire_auth_token_on_timeout = false
# ==> Configuration for :lockable
# Defines which strategy will be used to lock an account.
# :failed_attempts = Locks an account after a number of failed attempts to sign in.
# :none = No lock strategy. You should handle locking by yourself.
# config.lock_strategy = :failed_attempts
# Defines which key will be used when locking and unlocking an account
# config.unlock_keys = [ :email ]
# Defines which strategy will be used to unlock an account.
# :email = Sends an unlock link to the user email
# :time = Re-enables login after a certain amount of time (see :unlock_in below)
# :both = Enables both strategies
# :none = No unlock strategy. You should handle unlocking by yourself.
# config.unlock_strategy = :both
# Number of authentication tries before locking an account if lock_strategy
# is failed attempts.
# config.maximum_attempts = 20
# Time interval to unlock the account if :time is enabled as unlock_strategy.
# config.unlock_in = 1.hour
# ==> Configuration for :recoverable
#
# Defines which key will be used when recovering the password for an account
# config.reset_password_keys = [ :email ]
# Time interval you can reset your password with a reset password key.
# Don't put a too small interval or your users won't have the time to
# change their passwords.
config.reset_password_within = 6.hours
# ==> Configuration for :encryptable
# Allow you to use another encryption algorithm besides bcrypt (default). You can use
# :sha1, :sha512 or encryptors from others authentication tools as :clearance_sha1,
# :authlogic_sha512 (then you should set stretches above to 20 for default behavior)
# and :restful_authentication_sha1 (then you should set stretches to 10, and copy
# REST_AUTH_SITE_KEY to pepper)
# config.encryptor = :sha512
# ==> Configuration for :token_authenticatable
# Defines name of the authentication token params key
# config.token_authentication_key = :auth_token
# ==> Scopes configuration
# Turn scoped views on. Before rendering "sessions/new", it will first check for
# "users/sessions/new". It's turned off by default because it's slower if you
# are using only default views.
# config.scoped_views = false
# Configure the default scope given to Warden. By default it's the first
# devise role declared in your routes (usually :user).
# config.default_scope = :user
# Set this configuration to false if you want /users/sign_out to sign out
# only the current scope. By default, Devise signs out all scopes.
# config.sign_out_all_scopes = true
# ==> Navigation configuration
# Lists the formats that should be treated as navigational. Formats like
# :html, should redirect to the sign in page when the user does not have
# access, but formats like :xml or :json, should return 401.
#
# If you have any extra navigational formats, like :iphone or :mobile, you
# should add them to the navigational formats lists.
#
# The "*/*" below is required to match Internet Explorer requests.
# config.navigational_formats = ["*/*", :html]
# The default HTTP method used to sign out a resource. Default is :delete.
config.sign_out_via = :get
# ==> OmniAuth
# Add a new OmniAuth provider. Check the wiki for more information on setting
# up on your models and hooks.
# config.omniauth :github, 'APP_ID', 'APP_SECRET', :scope => 'user,public_repo'
if ENV['SCHOOLOGY_CONSUMER_KEY'].present? && ENV['SCHOOLOGY_CONSUMER_SECRET'].present?
SETUP_PROC = lambda do |env|
host = env['rack.session'][:schoology_host]
if host
env['omniauth.strategy'].options[:client_options][:authorize_url] = "https://#{host}/oauth/authorize"
end
end
config.omniauth 'schoology', ENV['SCHOOLOGY_CONSUMER_KEY'], ENV['SCHOOLOGY_CONSUMER_SECRET'],
{
strategy_class: OmniAuth::Strategies::Schoology,
scope: 'user',
setup: SETUP_PROC
}
end
if ENV['GOOGLE_CLIENT_KEY'].present? && ENV['GOOGLE_CLIENT_SECRET'].present?
config.omniauth 'google', ENV['GOOGLE_CLIENT_KEY'], ENV['GOOGLE_CLIENT_SECRET'],
{
name: 'google',
strategy_class: OmniAuth::Strategies::PortalGoogle,
scope: [ 'https://www.googleapis.com/auth/userinfo.profile',
'https://www.googleapis.com/auth/userinfo.email' ]
}
end
# ==> Warden configuration
# If you want to use other strategies, that are not supported by Devise, or
# change the failure app, you can configure them inside the config.warden block.
#
# config.warden do |manager|
# manager.intercept_401 = false
# manager.default_strategies(:scope => :user).unshift :some_external_strategy
# end
# ==> Mountable engine configurations
# When using Devise inside an engine, let's call it `MyEngine`, and this engine
# is mountable, there are some extra configurations to be taken into account.
# The following options are available, assuming the engine is mounted as:
#
# mount MyEngine, at: "/my_engine"
#
# The router that invoked `devise_for`, in the example above, would be:
# config.router_name = :my_engine
# When using omniauth, Devise cannot automatically set Omniauth path,
# so you need to do it manually. For the users scope, it would be:
config.omniauth_path_prefix = "/users/auth"
config.warden do |manager|
manager.failure_app = CustomFailure
end
end