Showing 6,062 of 6,062 total issues
Function scale
has 47 lines of code (exceeds 25 allowed). Consider refactoring. Open
$.effects.effect.scale = function( o, done ) {
// Create element
var el = $( this ),
options = $.extend( true, {}, o ),
- Create a ticketCreate a ticket
Function registerEvents
has 47 lines of code (exceeds 25 allowed). Consider refactoring. Open
NodeList.prototype.registerEvents = function() {
var self = this;
$('.dropzone .delete').live('click', function(event) {
event.preventDefault();
- Create a ticketCreate a ticket
Method unique_name
has 47 lines of code (exceeds 25 allowed). Consider refactoring. Open
def unique_name
# check first if we have already a claimed disk which points to the same
# device node. if so, use that as "unique name"
already_claimed_name = self.unique_name_already_claimed_by
unless already_claimed_name.nil?
- Create a ticketCreate a ticket
Method node_detail_software
has 47 lines of code (exceeds 25 allowed). Consider refactoring. Open
def node_detail_software
@node_detail_software ||= begin
[].tap do |result|
result.push [
t("model.attributes.node.name"),
- Create a ticketCreate a ticket
Similar blocks of code found in 2 locations. Consider refactoring. Open
top = o.grid[1] ? this.originalPageY + Math.round((pageY - this.originalPageY) / o.grid[1]) * o.grid[1] : this.originalPageY;
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 72.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
left = o.grid[0] ? this.originalPageX + Math.round((pageX - this.originalPageX) / o.grid[0]) * o.grid[0] : this.originalPageX;
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 72.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
return {
top: po.top + (parseInt(this.offsetParent.css("borderTopWidth"),10) || 0),
left: po.left + (parseInt(this.offsetParent.css("borderLeftWidth"),10) || 0)
};
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 72.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
return {
top: po.top + (parseInt(this.offsetParent.css("borderTopWidth"),10) || 0),
left: po.left + (parseInt(this.offsetParent.css("borderLeftWidth"),10) || 0)
};
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 72.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Function matcherFromTokens
has 46 lines of code (exceeds 25 allowed). Consider refactoring. Open
function matcherFromTokens( tokens ) {
var checkContext, matcher, j,
len = tokens.length,
leadingRelative = Expr.relative[ tokens[0].type ],
implicitRelative = leadingRelative || Expr.relative[" "],
- Create a ticketCreate a ticket
Function tokenize
has 46 lines of code (exceeds 25 allowed). Consider refactoring. Open
tokenize = Sizzle.tokenize = function( selector, parseOnly ) {
var matched, match, tokens, type,
soFar, groups, preFilters,
cached = tokenCache[ selector + " " ];
- Create a ticketCreate a ticket
Function _generatePosition
has 46 lines of code (exceeds 25 allowed). Consider refactoring. Open
_generatePosition: function(event) {
var top, left,
o = this.options,
pageX = event.pageX,
- Create a ticketCreate a ticket
Function processGroups
has 46 lines of code (exceeds 25 allowed). Consider refactoring. Open
LedUpdate.prototype.processGroups = function(response, ignores) {
var self = this;
var reload = false;
$('[data-group]').each(function(index, current) {
var current_handle = $(current).data('group');
- Create a ticketCreate a ticket
Function fold
has 46 lines of code (exceeds 25 allowed). Consider refactoring. Open
$.effects.effect.fold = function( o, done ) {
// Create element
var el = $( this ),
props = [ "position", "top", "bottom", "left", "right", "height", "width" ],
- Create a ticketCreate a ticket
Function slide
has 46 lines of code (exceeds 25 allowed). Consider refactoring. Open
Carousel.prototype.slide = function (type, next) {
var $active = this.$element.find('.item.active')
var $next = next || this.getItemForDirection(type, $active)
var isCycling = this.interval
var direction = type == 'next' ? 'left' : 'right'
- Create a ticketCreate a ticket
Method proposal_commit
has 46 lines of code (exceeds 25 allowed). Consider refactoring. Open
def proposal_commit
code, message = @service_object.proposal_commit(
params[:id]
)
- Create a ticketCreate a ticket
Function _tabKeydown
has 45 lines of code (exceeds 25 allowed). Consider refactoring. Open
_tabKeydown: function( event ) {
/*jshint maxcomplexity:15*/
var focusedTab = $( this.document[0].activeElement ).closest( "li" ),
selectedIndex = this.tabs.index( focusedTab ),
goingForward = true;
- Create a ticketCreate a ticket
Similar blocks of code found in 2 locations. Consider refactoring. Open
getRegion: function (el, x, y) {
var shapeid = this.target.getShapeAt(el, x, y);
return (shapeid !== undefined && this.shapes[shapeid] !== undefined) ? this.shapes[shapeid] : undefined;
},
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 71.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
this.originalSize = this._helper ? { width: el.outerWidth(), height: el.outerHeight() } : { width: el.width(), height: el.height() };
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 71.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
if (this.options.stringParams) {
if(val.depth) {
this.addDepth(val.depth);
}
this.opcode('getContext', val.depth || 0);
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 71.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
event.pageX = original.clientX + ( doc && doc.scrollLeft || body && body.scrollLeft || 0 ) - ( doc && doc.clientLeft || body && body.clientLeft || 0 );
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 71.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76