crowbar/crowbar-hadoop

View on GitHub
chef/cookbooks/hadoop/templates/default/mapred-site.xml.erb

Summary

Maintainability
Test Coverage
<?xml version="1.0"?>
<?xml-stylesheet type="text/xsl" href="configuration.xsl"?>

<!--
  Cookbook: hadoop
  Filename: mapred-site.xml
 
  Copyright (c) 2011 Dell Inc.
 
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
 
      http://www.apache.org/licenses/LICENSE-2.0
 
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
-->

<!-- Generated by Chef for <%= @node[:fqdn] %> -->

<configuration>

  <property>
    <name>hadoop.job.history.location</name>
    <value><%= node[:hadoop][:mapred][:hadoop_job_history_location] %></value>
    <description>If job tracker is static the history files are stored in this single
      well known place. If No value is set here, by default, it is in
      the local file system at ${hadoop.log.dir}/history.
    </description>
  </property>

  <property>
    <name>hadoop.job.history.user.location</name>
    <value><%= node[:hadoop][:mapred][:hadoop_job_history_user_location] %></value>
    <description>User can specify a location to store the history files of a
      particular job. If nothing is specified, the logs are stored in
      output directory. The files are stored in "_logs/history/" in
      the directory. User can stop logging by giving the value
      "none".
    </description>
  </property>

  <property>
    <name>hadoop.rpc.socket.factory.class.JobSubmissionProtocol</name>
    <value><%= node[:hadoop][:mapred][:hadoop_rpc_socket_factory_class_JobSubmissionProtocol] %></value>
    <description>SocketFactory to use to connect to a Map/Reduce master (JobTracker).
      If null or empty, then use hadoop.rpc.socket.class.default.
    </description>
  </property>

  <property>
    <name>io.map.index.skip</name>
    <value><%= node[:hadoop][:mapred][:io_map_index_skip] %></value>
    <description>Number of index entries to skip between each entry. Zero by default.
      Setting this to values larger than zero can facilitate opening
      large map files using less memory.
    </description>
  </property>

  <property>
    <name>io.sort.factor</name>
    <value><%= node[:hadoop][:mapred][:io_sort_factor] %></value>
    <description>The number of streams to merge at once while sorting files. This
      determines the number of open file handles.
    </description>
  </property>

  <property>
    <name>io.sort.mb</name>
    <value><%= node[:hadoop][:mapred][:io_sort_mb] %></value>
    <description>The total amount of buffer memory to use while sorting files, in
      megabytes. By default, gives each merge stream 1MB, which
      should minimize seeks.
    </description>
  </property>

  <property>
    <name>io.sort.record.percent</name>
    <value><%= node[:hadoop][:mapred][:io_sort_record_percent] %></value>
    <description>The percentage of io.sort.mb dedicated to tracking record boundaries.
      Let this value be r, io.sort.mb be x. The maximum number of
      records collected before the collection thread must block is
      equal to (r * x) / 4.
    </description>
  </property>

  <property>
    <name>io.sort.spill.percent</name>
    <value><%= node[:hadoop][:mapred][:io_sort_spill_percent] %></value>
    <description>The soft limit in either the buffer or record collection buffers.
      Once reached, a thread will begin to spill the contents to disk
      in the background. Note that this does not imply any chunking
      of data to the spill. A value less than 0.5 is not recommended.
    </description>
  </property>

  <property>
    <name>job.end.retry.attempts</name>
    <value><%= node[:hadoop][:mapred][:job_end_retry_attempts] %></value>
    <description>Indicates how many times hadoop should attempt to contact the
      notification URL.
    </description>
  </property>

  <property>
    <name>job.end.retry.interval</name>
    <value><%= node[:hadoop][:mapred][:job_end_retry_interval] %></value>
    <description>Indicates time in milliseconds between notification URL retry calls.
    </description>
  </property>

  <property>
    <name>jobclient.output.filter</name>
    <value><%= node[:hadoop][:mapred][:jobclient_output_filter] %></value>
    <description>The filter for controlling the output of the task's userlogs sent to
      the console of the JobClient. The permissible options are:
      NONE, KILLED, FAILED, SUCCEEDED and ALL.
    </description>
  </property>

  <property>
    <name>keep.failed.task.files</name>
    <value><%= node[:hadoop][:mapred][:keep_failed_task_files] %></value>
    <description>Should the files for failed tasks be kept. This should only be used
      on jobs that are failing, because the storage is never
      reclaimed. It also prevents the map outputs from being erased
      from the reduce directory as they are consumed.
    </description>
  </property>

  <property>
    <name>map.sort.class</name>
    <value><%= node[:hadoop][:mapred][:map_sort_class] %></value>
    <description>The default sort class for sorting keys.
    </description>
  </property>

  <property>
    <name>mapred.acls.enabled</name>
    <value><%= node[:hadoop][:mapred][:mapred_acls_enabled] %></value>
    <description>Specifies whether ACLs should be checked for authorization of users
      for doing various queue and job level operations. ACLs are
      disabled by default. If enabled, access control checks are made
      by JobTracker and TaskTracker when requests are made by users
      for queue operations like submit job to a queue and kill a job
      in the queue and job operations like viewing the job-details
      (See mapreduce.job.acl-view-job) or for modifying the job (See
      mapreduce.job.acl-modify-job) using Map/Reduce APIs, RPCs or
      via the console and web user interfaces.
    </description>
  </property>

  <property>
    <name>mapred.child.env</name>
    <value><%= node[:hadoop][:mapred][:mapred_child_env] %></value>
    <description>User added environment variables for the task tracker child
      processes. Example : 1) A=foo This will set the env variable A
      to foo 2) B=$B:c This is inherit tasktracker's B env variable.
    </description>
  </property>

  <property>
    <name>mapred.child.java.opts</name>
    <value><%= node[:hadoop][:mapred][:mapred_child_java_opts] %></value>
    <description>Java opts for the task tracker child processes. The following symbol,
      if present, will be interpolated: @taskid@ is replaced by
      current TaskID. Any other occurrences of '@' will go unchanged.
      For example, to enable verbose gc logging to a file named for
      the taskid in /tmp and to set the heap maximum to be a
      gigabyte, pass a 'value' of: -Xmx1024m -verbose:gc
      -Xloggc:/tmp/@taskid@.gc The configuration variable
      mapred.child.ulimit can be used to control the maximum virtual
      memory of the child processes.
    </description>
  </property>

  <property>
    <name>mapred.child.tmp</name>
    <value><%= node[:hadoop][:mapred][:mapred_child_tmp] %></value>
    <description>To set the value of tmp directory for map and reduce tasks. If the
      value is an absolute path, it is directly assigned. Otherwise,
      it is prepended with task's working directory. The java tasks
      are executed with option -Djava.io.tmpdir='the absolute path of
      the tmp dir'. Pipes and streaming are set with environment
      variable, TMPDIR='the absolute path of the tmp dir'.
    </description>
  </property>

  <property>
    <name>mapred.child.ulimit</name>
    <value><%= node[:hadoop][:mapred][:mapred_child_ulimit] %></value>
    <description>The maximum virtual memory, in KB, of a process launched by the
      Map-Reduce framework. This can be used to control both the
      Mapper/Reducer tasks and applications using Hadoop Pipes,
      Hadoop Streaming etc. By default it is left unspecified to let
      cluster admins control it via limits.conf and other such
      relevant mechanisms. Note: mapred.child.ulimit must be greater
      than or equal to the -Xmx passed to JavaVM, else the VM might
      not start.
    </description>
  </property>

  <property>
    <name>mapred.cluster.map.memory.mb</name>
    <value><%= node[:hadoop][:mapred][:mapred_cluster_map_memory_mb] %></value>
    <description>The size, in terms of virtual memory, of a single map slot in the
      Map-Reduce framework, used by the scheduler. A job can ask for
      multiple slots for a single map task via
      mapred.job.map.memory.mb, upto the limit specified by
      mapred.cluster.max.map.memory.mb, if the scheduler supports the
      feature. The value of -1 indicates that this feature is turned
      off.
    </description>
  </property>

  <property>
    <name>mapred.cluster.max.map.memory.mb</name>
    <value><%= node[:hadoop][:mapred][:mapred_cluster_max_map_memory_mb] %></value>
    <description>The maximum size, in terms of virtual memory, of a single map task
      launched by the Map-Reduce framework, used by the scheduler. A
      job can ask for multiple slots for a single map task via
      mapred.job.map.memory.mb, upto the limit specified by
      mapred.cluster.max.map.memory.mb, if the scheduler supports the
      feature. The value of -1 indicates that this feature is turned
      off.
    </description>
  </property>

  <property>
    <name>mapred.cluster.max.reduce.memory.mb</name>
    <value><%= node[:hadoop][:mapred][:mapred_cluster_max_reduce_memory_mb] %></value>
    <description>The maximum size, in terms of virtual memory, of a single reduce task
      launched by the Map-Reduce framework, used by the scheduler. A
      job can ask for multiple slots for a single reduce task via
      mapred.job.reduce.memory.mb, upto the limit specified by
      mapred.cluster.max.reduce.memory.mb, if the scheduler supports
      the feature. The value of -1 indicates that this feature is
      turned off.
    </description>
  </property>

  <property>
    <name>mapred.cluster.reduce.memory.mb</name>
    <value><%= node[:hadoop][:mapred][:mapred_cluster_reduce_memory_mb] %></value>
    <description>The size, in terms of virtual memory, of a single reduce slot in the
      Map-Reduce framework, used by the scheduler. A job can ask for
      multiple slots for a single reduce task via
      mapred.job.reduce.memory.mb, upto the limit specified by
      mapred.cluster.max.reduce.memory.mb, if the scheduler supports
      the feature. The value of -1 indicates that this feature is
      turned off.
    </description>
  </property>

  <property>
    <name>mapred.compress.map.output</name>
    <value><%= node[:hadoop][:mapred][:mapred_compress_map_output] %></value>
    <description>Should the outputs of the maps be compressed before being sent across
      the network. Uses SequenceFile compression.
    </description>
  </property>

  <property>
    <name>mapred.healthChecker.interval</name>
    <value><%= node[:hadoop][:mapred][:mapred_healthChecker_interval] %></value>
    <description>Frequency of the node health script to be run, in milliseconds.
    </description>
  </property>

  <property>
    <name>mapred.healthChecker.script.args</name>
    <value><%= node[:hadoop][:mapred][:mapred_healthChecker_script_args] %></value>
    <description>List of arguments which are to be passed to node health script when
      it is being launched comma seperated.
    </description>
  </property>

  <property>
    <name>mapred.healthChecker.script.path</name>
    <value><%= node[:hadoop][:mapred][:mapred_healthChecker_script_path] %></value>
    <description>Absolute path to the script which is periodicallyrun by the node
      health monitoring service to determine if the node is healthy
      or not. If the value of this key is empty or the file does not
      exist in the location configured here, the node health
      monitoring service is not started.
    </description>
  </property>

  <property>
    <name>mapred.healthChecker.script.timeout</name>
    <value><%= node[:hadoop][:mapred][:mapred_healthChecker_script_timeout] %></value>
    <description>Time after node health script should be killed if unresponsive and
      considered that the script has failed.
    </description>
  </property>

  <property>
    <name>mapred.heartbeats.in.second</name>
    <value><%= node[:hadoop][:mapred][:mapred_heartbeats_in_second] %></value>
    <description>Expert: Approximate number of heart-beats that could arrive at
      JobTracker in a second. Assuming each RPC can be processed in
      10msec, the default value is made 100 RPCs in a second.
    </description>
  </property>

  <property>
    <name>mapred.hosts</name>
    <value><%= node[:hadoop][:mapred][:mapred_hosts] %></value>
    <description>Names a file that contains the list of nodes that may connect to the
      jobtracker. If the value is empty, all hosts are permitted.
    </description>
  </property>

  <property>
    <name>mapred.hosts.exclude</name>
    <value><%= node[:hadoop][:mapred][:mapred_hosts_exclude] %></value>
    <description>Names a file that contains the list of hosts that should be excluded
      by the jobtracker. If the value is empty, no hosts are
      excluded.
    </description>
  </property>

  <property>
    <name>mapred.inmem.merge.threshold</name>
    <value><%= node[:hadoop][:mapred][:mapred_inmem_merge_threshold] %></value>
    <description>The threshold, in terms of the number of files for the in-memory
      merge process. When we accumulate threshold number of files we
      initiate the in-memory merge and spill to disk. A value of 0 or
      less than 0 indicates we want to DON'T have any threshold and
      instead depend only on the ramfs's memory consumption to
      trigger the merge.
    </description>
  </property>

  <property>
    <name>mapred.job.map.memory.mb</name>
    <value><%= node[:hadoop][:mapred][:mapred_job_map_memory_mb] %></value>
    <description>The size, in terms of virtual memory, of a single map task for the
      job. A job can ask for multiple slots for a single map task,
      rounded up to the next multiple of mapred.cluster.map.memory.mb
      and upto the limit specified by
      mapred.cluster.max.map.memory.mb, if the scheduler supports the
      feature. The value of -1 indicates that this feature is turned
      off iff mapred.cluster.map.memory.mb is also turned off (-1).
    </description>
  </property>

  <property>
    <name>mapred.job.queue.name</name>
    <value><%= node[:hadoop][:mapred][:mapred_job_queue_name] %></value>
    <description>Queue to which a job is submitted. This must match one of the queues
      defined in mapred.queue.names for the system. Also, the ACL
      setup for the queue must allow the current user to submit a job
      to the queue. Before specifying a queue, ensure that the system
      is configured with the queue, and access is allowed for
      submitting jobs to the queue.
    </description>
  </property>

  <property>
    <name>mapred.job.reduce.input.buffer.percent</name>
    <value><%= node[:hadoop][:mapred][:mapred_job_reduce_input_buffer_percent] %></value>
    <description>The percentage of memory- relative to the maximum heap size- to
      retain map outputs during the reduce. When the shuffle is
      concluded, any remaining map outputs in memory must consume
      less than this threshold before the reduce can begin.
    </description>
  </property>

  <property>
    <name>mapred.job.reduce.memory.mb</name>
    <value><%= node[:hadoop][:mapred][:mapred_job_reduce_memory_mb] %></value>
    <description>The size, in terms of virtual memory, of a single reduce task for the
      job. A job can ask for multiple slots for a single map task,
      rounded up to the next multiple of
      mapred.cluster.reduce.memory.mb and upto the limit specified by
      mapred.cluster.max.reduce.memory.mb, if the scheduler supports
      the feature. The value of -1 indicates that this feature is
      turned off iff mapred.cluster.reduce.memory.mb is also turned
      off (-1).
    </description>
  </property>

  <property>
    <name>mapred.job.reuse.jvm.num.tasks</name>
    <value><%= node[:hadoop][:mapred][:mapred_job_reuse_jvm_num_tasks] %></value>
    <description>How many tasks to run per jvm. If set to -1, there is no limit.
    </description>
  </property>

  <property>
    <name>mapred.job.shuffle.input.buffer.percent</name>
    <value><%= node[:hadoop][:mapred][:mapred_job_shuffle_input_buffer_percent] %></value>
    <description>The percentage of memory to be allocated from the maximum heap size
      to storing map outputs during the shuffle.
    </description>
  </property>

  <property>
    <name>mapred.job.shuffle.merge.percent</name>
    <value><%= node[:hadoop][:mapred][:mapred_job_shuffle_merge_percent] %></value>
    <description>The usage threshold at which an in-memory merge will be initiated,
      expressed as a percentage of the total memory allocated to
      storing in-memory map outputs, as defined by
      mapred.job.shuffle.input.buffer.percent.
    </description>
  </property>

  <property>
    <name>mapred.job.tracker</name>
    <value><%= node[:hadoop][:mapred][:mapred_job_tracker] %></value>
    <description>The host and port that the MapReduce job tracker runs at. If "local",
      then jobs are run in-process as a single map and reduce task.
    </description>
  </property>

  <property>
    <name>mapred.job.tracker.handler.count</name>
    <value><%= node[:hadoop][:mapred][:mapred_job_tracker_handler_count] %></value>
    <description>The number of server threads for the JobTracker. This should be
      roughly 4% of the number of tasktracker nodes.
    </description>
  </property>

  <property>
    <name>mapred.job.tracker.history.completed.location</name>
    <value><%= node[:hadoop][:mapred][:mapred_job_tracker_history_completed_location] %></value>
    <description>The completed job history files are stored at this single well known
      location. If nothing is specified, the files are stored at
      ${hadoop.job.history.location}/done.
    </description>
  </property>

  <property>
    <name>mapred.job.tracker.http.address</name>
    <value><%= node[:hadoop][:mapred][:mapred_job_tracker_http_address] %></value>
    <description>The job tracker http server address and port the server will listen
      on. If the port is 0 then the server will start on a free port.
    </description>
  </property>

  <property>
    <name>mapred.job.tracker.jobhistory.lru.cache.size</name>
    <value><%= node[:hadoop][:mapred][:mapred_job_tracker_jobhistory_lru_cache_size] %></value>
    <description>The number of job history files loaded in memory. The jobs are loaded
      when they are first accessed. The cache is cleared based on
      LRU.
    </description>
  </property>

  <property>
    <name>mapred.job.tracker.persist.jobstatus.active</name>
    <value><%= node[:hadoop][:mapred][:mapred_job_tracker_persist_jobstatus_active] %></value>
    <description>Indicates if persistency of job status information is active or not.
    </description>
  </property>

  <property>
    <name>mapred.job.tracker.persist.jobstatus.dir</name>
    <value><%= node[:hadoop][:mapred][:mapred_job_tracker_persist_jobstatus_dir] %></value>
    <description>The directory where the job status information is persisted in a file
      system to be available after it drops of the memory queue and
      between jobtracker restarts.
    </description>
  </property>

  <property>
    <name>mapred.job.tracker.persist.jobstatus.hours</name>
    <value><%= node[:hadoop][:mapred][:mapred_job_tracker_persist_jobstatus_hours] %></value>
    <description>The number of hours job status information is persisted in DFS. The
      job status information will be available after it drops of the
      memory queue and between jobtracker restarts. With a zero value
      the job status information is not persisted at all in DFS.
    </description>
  </property>

  <property>
    <name>mapred.job.tracker.retiredjobs.cache.size</name>
    <value><%= node[:hadoop][:mapred][:mapred_job_tracker_retiredjobs_cache_size] %></value>
    <description>The number of retired job status to keep in the cache.
    </description>
  </property>

  <property>
    <name>mapred.jobtracker.blacklist.fault-bucket-width</name>
    <value><%= node[:hadoop][:mapred][:mapred_jobtracker_blacklist_fault_bucket_width] %></value>
    <description>The width (in minutes) of each bucket in the tasktracker fault
      timeout window. Each bucket is reused in a circular manner
      after a full timeout-window interval (defined by
      mapred.jobtracker.blacklist.fault-timeout-window).
    </description>
  </property>

  <property>
    <name>mapred.jobtracker.blacklist.fault-timeout-window</name>
    <value><%= node[:hadoop][:mapred][:mapred_jobtracker_blacklist_fault_timeout_window] %></value>
    <description>The timeout (in minutes) after which per-job tasktracker faults are
      forgiven. The window is logically a circular buffer of
      time-interval buckets whose width is defined by
      mapred.jobtracker.blacklist.fault-bucket-width; when the "now"
      pointer moves across a bucket boundary, the previous contents
      (faults) of the new bucket are cleared. In other words, the
      timeout's granularity is determined by the bucket width.
    </description>
  </property>

  <property>
    <name>mapred.jobtracker.completeuserjobs.maximum</name>
    <value><%= node[:hadoop][:mapred][:mapred_jobtracker_completeuserjobs_maximum] %></value>
    <description>The maximum number of complete jobs per user to keep around before
      delegating them to the job history.
    </description>
  </property>

  <property>
    <name>mapred.jobtracker.job.history.block.size</name>
    <value><%= node[:hadoop][:mapred][:mapred_jobtracker_job_history_block_size] %></value>
    <description>The block size of the job history file. Since the job recovery uses
      job history, its important to dump job history to disk as soon
      as possible. Note that this is an expert level parameter. The
      default value is set to 3 MB.
    </description>
  </property>

  <property>
    <name>mapred.jobtracker.maxtasks.per.job</name>
    <value><%= node[:hadoop][:mapred][:mapred_jobtracker_maxtasks_per_job] %></value>
    <description>The maximum number of tasks for a single job. A value of -1 indicates
      that there is no maximum.
    </description>
  </property>

  <property>
    <name>mapred.jobtracker.restart.recover</name>
    <value><%= node[:hadoop][:mapred][:mapred_jobtracker_restart_recover] %></value>
    <description>"true" to enable (job) recovery upon restart, "false" to start
      afresh.
    </description>
  </property>

  <property>
    <name>mapred.jobtracker.taskScheduler</name>
    <value><%= node[:hadoop][:mapred][:mapred_jobtracker_taskScheduler] %></value>
    <description>The class responsible for scheduling the tasks.
    </description>
  </property>

  <property>
    <name>mapred.jobtracker.taskScheduler.maxRunningTasksPerJob</name>
    <value><%= node[:hadoop][:mapred][:mapred_jobtracker_taskScheduler_maxRunningTasksPerJob] %></value>
    <description>The maximum number of running tasks for a job before it gets
      preempted. No limits if undefined.
    </description>
  </property>

  <property>
    <name>mapred.line.input.format.linespermap</name>
    <value><%= node[:hadoop][:mapred][:mapred_line_input_format_linespermap] %></value>
    <description>Number of lines per split in NLineInputFormat.
    </description>
  </property>

  <property>
    <name>mapred.local.dir</name>
    <value><%= node[:hadoop][:mapred][:mapred_local_dir].join(",") %></value>
    <description>The local directory where MapReduce stores intermediate data files.
      May be a comma-separated list of directories on different
      devices in order to spread disk i/o. Directories that do not
      exist are ignored.
    </description>
  </property>

  <property>
    <name>mapred.local.dir.minspacekill</name>
    <value><%= node[:hadoop][:mapred][:mapred_local_dir_minspacekill] %></value>
    <description>If the space in mapred.local.dir drops under this, do not ask more
      tasks until all the current ones have finished and cleaned up.
      Also, to save the rest of the tasks we have running, kill one
      of them, to clean up some space. Start with the reduce tasks,
      then go with the ones that have finished the least. Value in
      bytes.
    </description>
  </property>

  <property>
    <name>mapred.local.dir.minspacestart</name>
    <value><%= node[:hadoop][:mapred][:mapred_local_dir_minspacestart] %></value>
    <description>If the space in mapred.local.dir drops under this, do not ask for
      more tasks. Value in bytes.
    </description>
  </property>

  <property>
    <name>mapred.map.max.attempts</name>
    <value><%= node[:hadoop][:mapred][:mapred_map_max_attempts] %></value>
    <description>Expert: The maximum number of attempts per map task. In other words,
      framework will try to execute a map task these many number of
      times before giving up on it.
    </description>
  </property>

  <property>
    <name>mapred.map.output.compression.codec</name>
    <value><%= node[:hadoop][:mapred][:mapred_map_output_compression_codec] %></value>
    <description>If the map outputs are compressed, how should they be compressed?.
    </description>
  </property>

  <property>
    <name>mapred.map.tasks</name>
    <value><%= node[:hadoop][:mapred][:mapred_map_tasks] %></value>
    <description>The default number of map tasks per job. Ignored when
      mapred.job.tracker is "local".
    </description>
  </property>

  <property>
    <name>mapred.map.tasks.speculative.execution</name>
    <value><%= node[:hadoop][:mapred][:mapred_map_tasks_speculative_execution] %></value>
    <description>If true, then multiple instances of some map tasks may be executed in
      parallel.
    </description>
  </property>

  <property>
    <name>mapred.max.tracker.blacklists</name>
    <value><%= node[:hadoop][:mapred][:mapred_max_tracker_blacklists] %></value>
    <description>The number of blacklists for a tasktracker by various jobs after
      which the tasktracker will be marked as potentially faulty and
      is a candidate for graylisting across all jobs. (Unlike
      blacklisting, this is advisory; the tracker remains active.
      However, it is reported as graylisted in the web UI, with the
      expectation that chronically graylisted trackers will be
      manually decommissioned.) This value is tied to
      mapred.jobtracker.blacklist.fault-timeout-window; faults older
      than the window width are forgiven, so the tracker will recover
      from transient problems. It will also become healthy after a
      restart.
    </description>
  </property>

  <property>
    <name>mapred.max.tracker.failures</name>
    <value><%= node[:hadoop][:mapred][:mapred_max_tracker_failures] %></value>
    <description>The number of task-failures on a tasktracker of a given job after
      which new tasks of that job aren't assigned to it.
    </description>
  </property>

  <property>
    <name>mapred.merge.recordsBeforeProgress</name>
    <value><%= node[:hadoop][:mapred][:mapred_merge_recordsBeforeProgress] %></value>
    <description>The number of records to process during merge before sending a
      progress notification to the TaskTracker.
    </description>
  </property>

  <property>
    <name>mapred.min.split.size</name>
    <value><%= node[:hadoop][:mapred][:mapred_min_split_size] %></value>
    <description>The minimum size chunk that map input should be split into. Note that
      some file formats may have minimum split sizes that take
      priority over this setting.
    </description>
  </property>

  <property>
    <name>mapred.output.compress</name>
    <value><%= node[:hadoop][:mapred][:mapred_output_compress] %></value>
    <description>Should the job outputs be compressed?.
    </description>
  </property>

  <property>
    <name>mapred.output.compression.codec</name>
    <value><%= node[:hadoop][:mapred][:mapred_output_compression_codec] %></value>
    <description>If the job outputs are compressed, how should they be compressed?.
    </description>
  </property>

  <property>
    <name>mapred.output.compression.type</name>
    <value><%= node[:hadoop][:mapred][:mapred_output_compression_type] %></value>
    <description>If the job outputs are to compressed as SequenceFiles, how should
      they be compressed? Should be one of NONE, RECORD or BLOCK.
    </description>
  </property>

  <property>
    <name>mapred.queue.default.state</name>
    <value><%= node[:hadoop][:mapred][:mapred_queue_default_state] %></value>
    <description>This values defines the state , default queue is in. the values can
      be either "STOPPED" or "RUNNING" This value can be changed at
      runtime.
    </description>
  </property>

  <property>
    <name>mapred.queue.names</name>
    <value><%= node[:hadoop][:mapred][:mapred_queue_names] %></value>
    <description>Comma separated list of queues configured for this jobtracker. Jobs
      are added to queues and schedulers can configure different
      scheduling properties for the various queues. To configure a
      property for a queue, the name of the queue must match the name
      specified in this value. Queue properties that are common to
      all schedulers are configured here with the naming convention,
      mapred.queue.$QUEUE-NAME.$PROPERTY-NAME, for e.g.
      mapred.queue.default.submit-job-acl. The number of queues
      configured in this parameter could depend on the type of
      scheduler being used, as specified in
      mapred.jobtracker.taskScheduler. For example, the
      JobQueueTaskScheduler supports only a single queue, which is
      the default configured here. Before adding more queues, ensure
      that the scheduler you've configured supports multiple queues.
    </description>
  </property>

  <property>
    <name>mapred.reduce.copy.backoff</name>
    <value><%= node[:hadoop][:mapred][:mapred_reduce_copy_backoff] %></value>
    <description>The maximum amount of time (in seconds) a reducer spends on fetching
      one map output before declaring it as failed.
    </description>
  </property>

  <property>
    <name>mapred.reduce.max.attempts</name>
    <value><%= node[:hadoop][:mapred][:mapred_reduce_max_attempts] %></value>
    <description>Expert: The maximum number of attempts per reduce task. In other
      words, framework will try to execute a reduce task these many
      number of times before giving up on it.
    </description>
  </property>

  <property>
    <name>mapred.reduce.parallel.copies</name>
    <value><%= node[:hadoop][:mapred][:mapred_reduce_parallel_copies] %></value>
    <description>The default number of parallel transfers run by reduce during the
      copy(shuffle) phase.
    </description>
  </property>

  <property>
    <name>mapred.reduce.slowstart.completed.maps</name>
    <value><%= node[:hadoop][:mapred][:mapred_reduce_slowstart_completed_maps] %></value>
    <description>Fraction of the number of maps in the job which should be complete
      before reduces are scheduled for the job.
    </description>
  </property>

  <property>
    <name>mapred.reduce.tasks</name>
    <value><%= node[:hadoop][:mapred][:mapred_reduce_tasks] %></value>
    <description>The default number of reduce tasks per job. Typically set to 99% of
      the cluster's reduce capacity, so that if a node fails the
      reduces can still be executed in a single wave. Ignored when
      mapred.job.tracker is "local".
    </description>
  </property>

  <property>
    <name>mapred.reduce.tasks.speculative.execution</name>
    <value><%= node[:hadoop][:mapred][:mapred_reduce_tasks_speculative_execution] %></value>
    <description>If true, then multiple instances of some reduce tasks may be executed
      in parallel.
    </description>
  </property>

  <property>
    <name>mapred.skip.attempts.to.start.skipping</name>
    <value><%= node[:hadoop][:mapred][:mapred_skip_attempts_to_start_skipping] %></value>
    <description>The number of Task attempts AFTER which skip mode will be kicked off.
      When skip mode is kicked off, the tasks reports the range of
      records which it will process next, to the TaskTracker. So that
      on failures, TT knows which ones are possibly the bad records.
      On further executions, those are skipped.
    </description>
  </property>

  <property>
    <name>mapred.skip.map.auto.incr.proc.count</name>
    <value><%= node[:hadoop][:mapred][:mapred_skip_map_auto_incr_proc_count] %></value>
    <description>The flag which if set to true,
      SkipBadRecords.COUNTER_MAP_PROCESSED_RECORDS is incremented by
      MapRunner after invoking the map function. This value must be
      set to false for applications which process the records
      asynchronously or buffer the input records. For example
      streaming. In such cases applications should increment this
      counter on their own.
    </description>
  </property>

  <property>
    <name>mapred.skip.map.max.skip.records</name>
    <value><%= node[:hadoop][:mapred][:mapred_skip_map_max_skip_records] %></value>
    <description>The number of acceptable skip records surrounding the bad record PER
      bad record in mapper. The number includes the bad record as
      well. To turn the feature of detection/skipping of bad records
      off, set the value to 0. The framework tries to narrow down the
      skipped range by retrying until this threshold is met OR all
      attempts get exhausted for this task. Set the value to
      Long.MAX_VALUE to indicate that framework need not try to
      narrow down. Whatever records(depends on application) get
      skipped are acceptable.
    </description>
  </property>

  <property>
    <name>mapred.skip.out.dir</name>
    <value><%= node[:hadoop][:mapred][:mapred_skip_out_dir] %></value>
    <description>If no value is specified here, the skipped records are written to the
      output directory at _logs/skip. User can stop writing skipped
      records by giving the value "none".
    </description>
  </property>

  <property>
    <name>mapred.skip.reduce.auto.incr.proc.count</name>
    <value><%= node[:hadoop][:mapred][:mapred_skip_reduce_auto_incr_proc_count] %></value>
    <description>The flag which if set to true,
      SkipBadRecords.COUNTER_REDUCE_PROCESSED_GROUPS is incremented
      by framework after invoking the reduce function. This value
      must be set to false for applications which process the records
      asynchronously or buffer the input records. For example
      streaming. In such cases applications should increment this
      counter on their own.
    </description>
  </property>

  <property>
    <name>mapred.skip.reduce.max.skip.groups</name>
    <value><%= node[:hadoop][:mapred][:mapred_skip_reduce_max_skip_groups] %></value>
    <description>The number of acceptable skip groups surrounding the bad group PER
      bad group in reducer. The number includes the bad group as
      well. To turn the feature of detection/skipping of bad groups
      off, set the value to 0. The framework tries to narrow down the
      skipped range by retrying until this threshold is met OR all
      attempts get exhausted for this task. Set the value to
      Long.MAX_VALUE to indicate that framework need not try to
      narrow down. Whatever groups(depends on application) get
      skipped are acceptable.
    </description>
  </property>

  <property>
    <name>mapred.submit.replication</name>
    <value><%= node[:hadoop][:mapred][:mapred_submit_replication] %></value>
    <description>The replication level for submitted job files. This should be around
      the square root of the number of nodes.
    </description>
  </property>

  <property>
    <name>mapred.system.dir</name>
    <value><%= node[:hadoop][:mapred][:mapred_system_dir] %></value>
    <description>The directory where MapReduce stores control files.
    </description>
  </property>

  <property>
    <name>mapred.task.cache.levels</name>
    <value><%= node[:hadoop][:mapred][:mapred_task_cache_levels] %></value>
    <description>This is the max level of the task cache. For example, if the level is
      2, the tasks cached are at the host level and at the rack
      level.
    </description>
  </property>

  <property>
    <name>mapred.task.profile</name>
    <value><%= node[:hadoop][:mapred][:mapred_task_profile] %></value>
    <description>To set whether the system should collect profiler information for
      some of the tasks in this job? The information is stored in the
      user log directory. The value is "true" if task profiling is
      enabled.
    </description>
  </property>

  <property>
    <name>mapred.task.profile.maps</name>
    <value><%= node[:hadoop][:mapred][:mapred_task_profile_maps] %></value>
    <description>To set the ranges of map tasks to profile. mapred.task.profile has to
      be set to true for the value to be accounted.
    </description>
  </property>

  <property>
    <name>mapred.task.profile.reduces</name>
    <value><%= node[:hadoop][:mapred][:mapred_task_profile_reduces] %></value>
    <description>To set the ranges of reduce tasks to profile. mapred.task.profile has
      to be set to true for the value to be accounted.
    </description>
  </property>

  <property>
    <name>mapred.task.timeout</name>
    <value><%= node[:hadoop][:mapred][:mapred_task_timeout] %></value>
    <description>The number of milliseconds before a task will be terminated if it
      neither reads an input, writes an output, nor updates its
      status string.
    </description>
  </property>

  <property>
    <name>mapred.task.tracker.http.address</name>
    <value><%= node[:hadoop][:mapred][:mapred_task_tracker_http_address] %></value>
    <description>The task tracker http server address and port. If the port is 0 then
      the server will start on a free port.
    </description>
  </property>

  <property>
    <name>mapred.task.tracker.report.address</name>
    <value><%= node[:hadoop][:mapred][:mapred_task_tracker_report_address] %></value>
    <description>The interface and port that task tracker server listens on. Since it
      is only connected to by the tasks, it uses the local interface.
      EXPERT ONLY. Should only be changed if your host does not have
      the loopback interface.
    </description>
  </property>

  <property>
    <name>mapred.task.tracker.task-controller</name>
    <value><%= node[:hadoop][:mapred][:mapred_task_tracker_task_controller] %></value>
    <description>TaskController which is used to launch and manage task execution.
    </description>
  </property>

  <property>
    <name>mapred.tasktracker.dns.interface</name>
    <value><%= node[:hadoop][:mapred][:mapred_tasktracker_dns_interface] %></value>
    <description>The name of the Network Interface from which a task tracker should
      report its IP address.
    </description>
  </property>

  <property>
    <name>mapred.tasktracker.dns.nameserver</name>
    <value><%= node[:hadoop][:mapred][:mapred_tasktracker_dns_nameserver] %></value>
    <description>The host name or IP address of the name server (DNS) which a
      TaskTracker should use to determine the host name used by the
      JobTracker for communication and display purposes.
    </description>
  </property>

  <property>
    <name>mapred.tasktracker.expiry.interval</name>
    <value><%= node[:hadoop][:mapred][:mapred_tasktracker_expiry_interval] %></value>
    <description>Expert: The time-interval, in miliseconds, after which a tasktracker
      is declared 'lost' if it doesn't send heartbeats.
    </description>
  </property>

  <property>
    <name>mapred.tasktracker.indexcache.mb</name>
    <value><%= node[:hadoop][:mapred][:mapred_tasktracker_indexcache_mb] %></value>
    <description>The maximum memory that a task tracker allows for the index cache
      that is used when serving map outputs to reducers.
    </description>
  </property>

  <property>
    <name>mapred.tasktracker.map.tasks.maximum</name>
    <value><%= node[:hadoop][:mapred][:mapred_tasktracker_map_tasks_maximum] %></value>
    <description>The maximum number of map tasks that will be run simultaneously by a
      task tracker.
    </description>
  </property>

  <property>
    <name>mapred.tasktracker.memory_calculator_plugin</name>
    <value><%= node[:hadoop][:mapred][:mapred_tasktracker_memory_calculator_plugin] %></value>
    <description>Name of the class whose instance will be used to query memory
      information on the tasktracker. The class must be an instance
      of org.apache.hadoop.util.MemoryCalculatorPlugin. If the value
      is null, the tasktracker attempts to use a class appropriate to
      the platform. Currently, the only platform supported is Linux.
    </description>
  </property>

  <property>
    <name>mapred.tasktracker.reduce.tasks.maximum</name>
    <value><%= node[:hadoop][:mapred][:mapred_tasktracker_reduce_tasks_maximum] %></value>
    <description>The maximum number of reduce tasks that will be run simultaneously by
      a task tracker.
    </description>
  </property>

  <property>
    <name>mapred.tasktracker.taskmemorymanager.monitoring-interval</name>
    <value><%= node[:hadoop][:mapred][:mapred_tasktracker_taskmemorymanager_monitoring_interval] %></value>
    <description>The interval, in milliseconds, for which the tasktracker waits
      between two cycles of monitoring its tasks' memory usage. Used
      only if tasks' memory management is enabled via
      mapred.tasktracker.tasks.maxmemory.
    </description>
  </property>

  <property>
    <name>mapred.tasktracker.tasks.sleeptime-before-sigkill</name>
    <value><%= node[:hadoop][:mapred][:mapred_tasktracker_tasks_sleeptime_before_sigkill] %></value>
    <description>The time, in milliseconds, the tasktracker waits for sending a
      SIGKILL to a process, after it has been sent a SIGTERM.
    </description>
  </property>

  <property>
    <name>mapred.temp.dir</name>
    <value><%= node[:hadoop][:mapred][:mapred_temp_dir] %></value>
    <description>A shared directory for temporary files.
    </description>
  </property>

  <property>
    <name>mapred.user.jobconf.limit</name>
    <value><%= node[:hadoop][:mapred][:mapred_user_jobconf_limit] %></value>
    <description>The maximum allowed size of the user jobconf. The default is set to 5
      MB.
    </description>
  </property>

  <property>
    <name>mapred.userlog.limit.kb</name>
    <value><%= node[:hadoop][:mapred][:mapred_userlog_limit_kb] %></value>
    <description>The maximum size of user-logs of each task in KB. 0 disables the cap.
    </description>
  </property>

  <property>
    <name>mapred.userlog.retain.hours</name>
    <value><%= node[:hadoop][:mapred][:mapred_userlog_retain_hours] %></value>
    <description>The maximum time, in hours, for which the user-logs are to be
      retained after the job completion.
    </description>
  </property>

  <property>
    <name>mapreduce.job.acl-modify-job</name>
    <value><%= node[:hadoop][:mapred][:mapreduce_job_acl_modify_job] %></value>
    <description>Job specific access-control list for 'modifying' the job. It is only
      used if authorization is enabled in Map/Reduce by setting the
      configuration property mapred.acls.enabled to true. This
      specifies the list of users and/or groups who can do
      modification operations on the job. For specifying a list of
      users and groups the format to use is "user1,user2
      group1,group". If set to '*', it allows all users/groups to
      modify this job. If set to ' '(i.e. space), it allows none.
      This configuration is used to guard all the modifications with
      respect to this job and takes care of all the following
      operations: o killing this job o killing a task of this job,
      failing a task of this job o setting the priority of this job
      Each of these operations are also protected by the per-queue
      level ACL "acl-administer-jobs" configured via
      mapred-queues.xml. So a caller should have the authorization to
      satisfy either the queue-level ACL or the job-level ACL.
      Irrespective of this ACL configuration, job-owner, the user who
      started the cluster, cluster administrators configured via
      mapreduce.cluster.administrators and queue administrators of
      the queue to which this job is submitted to configured via
      mapred.queue.queue-name.acl-administer-jobs in
      mapred-queue-acls.xml can do all the modification operations on
      a job. By default, nobody else besides job-owner, the user who
      started the cluster, cluster administrators and queue
      administrators can perform modification operations on a job.
    </description>
  </property>

  <property>
    <name>mapreduce.job.acl-view-job</name>
    <value><%= node[:hadoop][:mapred][:mapreduce_job_acl_view_job] %></value>
    <description>Job specific access-control list for 'viewing' the job. It is only
      used if authorization is enabled in Map/Reduce by setting the
      configuration property mapred.acls.enabled to true. This
      specifies the list of users and/or groups who can view private
      details about the job. For specifying a list of users and
      groups the format to use is "user1,user2 group1,group". If set
      to '*', it allows all users/groups to modify this job. If set
      to ' '(i.e. space), it allows none. This configuration is used
      to guard some of the job-views and at present only protects
      APIs that can return possibly sensitive information of the
      job-owner like o job-level counters o task-level counters o
      tasks' diagnostic information o task-logs displayed on the
      TaskTracker web-UI and o job.xml showed by the JobTracker's
      web-UI Every other piece of information of jobs is still
      accessible by any other user, for e.g., JobStatus, JobProfile,
      list of jobs in the queue, etc. Irrespective of this ACL
      configuration, job-owner, the user who started the cluster,
      cluster administrators configured via
      mapreduce.cluster.administrators and queue administrators of
      the queue to which this job is submitted to configured via
      mapred.queue.queue-name.acl-administer-jobs in
      mapred-queue-acls.xml can do all the view operations on a job.
      By default, nobody else besides job-owner, the user who started
      the cluster, cluster administrators and queue administrators
      can perform view operations on a job.
    </description>
  </property>

  <property>
    <name>mapreduce.job.complete.cancel.delegation.tokens</name>
    <value><%= node[:hadoop][:mapred][:mapreduce_job_complete_cancel_delegation_tokens] %></value>
    <description>if false - do not unregister/cancel delegation tokens from renewal,
      because same tokens may be used by spawned jobs.
    </description>
  </property>

  <property>
    <name>mapreduce.job.counters.limit</name>
    <value><%= node[:hadoop][:mapred][:mapreduce_job_counters_limit] %></value>
    <description>Limit on the number of counters allowed per job.
    </description>
  </property>

  <property>
    <name>mapreduce.job.split.metainfo.maxsize</name>
    <value><%= node[:hadoop][:mapred][:mapreduce_job_split_metainfo_maxsize] %></value>
    <description>The maximum permissible size of the split metainfo file. The
      JobTracker won't attempt to read split metainfo files bigger
      than the configured value. No limits if set to -1.
    </description>
  </property>

  <property>
    <name>mapreduce.jobtracker.staging.root.dir</name>
    <value><%= node[:hadoop][:mapred][:mapreduce_jobtracker_staging_root_dir] %></value>
    <description>The root of the staging area for users' job files In practice, this
      should be the directory where users' home directories are
      located (usually /user).
    </description>
  </property>

  <property>
    <name>mapreduce.reduce.input.limit</name>
    <value><%= node[:hadoop][:mapred][:mapreduce_reduce_input_limit] %></value>
    <description>The limit on the input size of the reduce. If the estimated input
      size of the reduce is greater than this value, job is failed. A
      value of -1 means that there is no limit set.
    </description>
  </property>

  <property>
    <name>mapreduce.reduce.shuffle.connect.timeout</name>
    <value><%= node[:hadoop][:mapred][:mapreduce_reduce_shuffle_connect_timeout] %></value>
    <description>Expert: The maximum amount of time (in milli seconds) a reduce task
      spends in trying to connect to a tasktracker for getting map
      output.
    </description>
  </property>

  <property>
    <name>mapreduce.reduce.shuffle.read.timeout</name>
    <value><%= node[:hadoop][:mapred][:mapreduce_reduce_shuffle_read_timeout] %></value>
    <description>Expert: The maximum amount of time (in milli seconds) a reduce task
      waits for map output data to be available for reading after
      obtaining connection.
    </description>
  </property>

  <property>
    <name>mapreduce.tasktracker.group</name>
    <value><%= node[:hadoop][:mapred][:mapreduce_tasktracker_group] %></value>
    <description>Expert: Group to which TaskTracker belongs. If LinuxTaskController is
      configured via mapreduce.tasktracker.taskcontroller, the group
      owner of the task-controller binary should be same as this
      group.
    </description>
  </property>

  <property>
    <name>mapreduce.tasktracker.outofband.heartbeat</name>
    <value><%= node[:hadoop][:mapred][:mapreduce_tasktracker_outofband_heartbeat] %></value>
    <description>Expert: Set this to true to let the tasktracker send an out-of-band
      heartbeat on task-completion for better latency.
    </description>
  </property>

  <property>
    <name>tasktracker.http.threads</name>
    <value><%= node[:hadoop][:mapred][:tasktracker_http_threads] %></value>
    <description>The number of worker threads that for the http server. This is used
      for map output fetching.
    </description>
  </property>

</configuration>