Sign upLogin

csirtgadgets/verbose-robot

View on GitHub
Star

Showing 161 of 172 total issues

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    def _pull(self, filters):
        try:
            with Client(ROUTER_ADDR, session['token']) as client:
                r = client.indicators_search(filters)
Severity: Major
Found in cif/httpd/indicators.py and 1 other location - About 1 day to fix
cif/httpd/app.py on lines 113..137

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 159.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

def _search_bulk(filters):
    try:
        with Client(ROUTER_ADDR, session['token']) as client:
            r = client.indicators_search(filters)
Severity: Major
Found in cif/httpd/app.py and 1 other location - About 1 day to fix
cif/httpd/indicators.py on lines 103..127

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 159.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

File indicator.py has 558 lines of code (exceeds 250 allowed). Consider refactoring.
Open

import os
import arrow
import json
from base64 import b64encode
import ipaddress
Severity: Major
Found in cif/store/sqlite/indicator.py - About 1 day to fix

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

                if filters.get('hours'):
                if re.match(r'^\d+$', filters['hours']):
                    now = arrow.utcnow()
                    end = '{0}Z'.format(now.format('YYYY-MM-DDTHH:mm:ss'))
                    now = now.replace(hours=-int(filters['hours']))
    Severity: Major
    Found in cif/httpd/indicators.py and 1 other location - About 1 day to fix
    cif/httpd/indicators.py on lines 138..145

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 126.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

                if filters.get('days'):
                if re.match(r'^\d+$', filters['days']):
                    now = arrow.utcnow()
                    end = '{0}Z'.format(now.format('YYYY-MM-DDTHH:mm:ss'))
                    now = now.replace(days=-int(filters['days']))
    Severity: Major
    Found in cif/httpd/indicators.py and 1 other location - About 1 day to fix
    cif/httpd/indicators.py on lines 147..154

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 126.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

            if d['itype'] == 'ipv4':
            match = re.search('^(\S+)\/(\d+)$', d['indicator'])  # TODO -- use ipaddress
            if match:
                i = i.join(Ipv4).filter(Ipv4.ipv4 == match.group(1), Ipv4.mask == match.group(2))
            else:
    Severity: Major
    Found in cif/store/sqlite/indicator.py and 1 other location - About 6 hrs to fix
    cif/store/sqlite/indicator.py on lines 605..610

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 101.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

            elif d['itype'] == 'ipv6':
            match = re.search('^(\S+)\/(\d+)$', d['indicator'])  # TODO -- use ipaddress
            if match:
                i = i.join(Ipv6).filter(Ipv6.ip == match.group(1), Ipv6.mask == match.group(2))
            else:
    Severity: Major
    Found in cif/store/sqlite/indicator.py and 1 other location - About 6 hrs to fix
    cif/store/sqlite/indicator.py on lines 598..603

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 101.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Function _filter_terms has a Cognitive Complexity of 40 (exceeds 5 allowed). Consider refactoring.
    Open

        def _filter_terms(self, filters, s):

        idx = ['reported_at', 'itype', 'confidence', 'probability', 'provider', 'asn', 'cc', 'asn_desc',
               'rdata', 'region', 'uuid', 'tags']
    Severity: Minor
    Found in cif/store/sqlite/indicator.py - About 6 hrs to fix

    Cognitive Complexity

    Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

    A method's cognitive complexity is based on a few simple rules:

    • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
    • Code is considered more complex for each "break in the linear flow of the code"
    • Code is considered more complex when "flow breaking structures are nested"

    Further reading

    File __init__.py has 404 lines of code (exceeds 250 allowed). Consider refactoring.
    Open

    #!/usr/bin/env python3

import logging
import textwrap
import ujson as json
    Severity: Minor
    Found in cif/store/__init__.py - About 5 hrs to fix

      Cyclomatic complexity is too high in function main. (26)
      Open

      def main():
    p = get_argument_parser()
    p = ArgumentParser(
        description=textwrap.dedent('''\
         Env Variables:
      Severity: Minor
      Found in cif/store/__init__.py by radon

      Cyclomatic Complexity

      Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

      Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

      Construct Effect on CC Reasoning
      if +1 An if statement is a single decision.
      elif +1 The elif statement adds another decision.
      else +0 The else statement does not cause a new decision. The decision is at the if.
      for +1 There is a decision at the start of the loop.
      while +1 There is a decision at the while statement.
      except +1 Each except branch adds a new conditional path of execution.
      finally +0 The finally block is unconditionally executed.
      with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
      assert +1 The assert statement internally roughly equals a conditional statement.
      Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
      Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

      Source: http://radon.readthedocs.org/en/latest/intro.html

      Function _upsert has a Cognitive Complexity of 32 (exceeds 5 allowed). Consider refactoring.
      Open

          def _upsert(self, s, n, d, token, cached_added, batch):
        try:
            # check to see if it's been added in the cache
            if cached_added.get(d['indicator']):
                if d.get('last_at') in cached_added[d['indicator']]:
      Severity: Minor
      Found in cif/store/sqlite/indicator.py - About 4 hrs to fix

      Cognitive Complexity

      Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

      A method's cognitive complexity is based on a few simple rules:

      • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
      • Code is considered more complex for each "break in the linear flow of the code"
      • Code is considered more complex when "flow breaking structures are nested"

      Further reading

      Cyclomatic complexity is too high in method _filter_terms. (22)
      Open

          def _filter_terms(self, filters, s):

        idx = ['reported_at', 'itype', 'confidence', 'probability', 'provider', 'asn', 'cc', 'asn_desc',
               'rdata', 'region', 'uuid', 'tags']
      Severity: Minor
      Found in cif/store/sqlite/indicator.py by radon

      Cyclomatic Complexity

      Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

      Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

      Construct Effect on CC Reasoning
      if +1 An if statement is a single decision.
      elif +1 The elif statement adds another decision.
      else +0 The else statement does not cause a new decision. The decision is at the if.
      for +1 There is a decision at the start of the loop.
      while +1 There is a decision at the while statement.
      except +1 Each except branch adds a new conditional path of execution.
      finally +0 The finally block is unconditionally executed.
      with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
      assert +1 The assert statement internally roughly equals a conditional statement.
      Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
      Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

      Source: http://radon.readthedocs.org/en/latest/intro.html

      Cyclomatic complexity is too high in method _upsert. (21)
      Open

          def _upsert(self, s, n, d, token, cached_added, batch):
        try:
            # check to see if it's been added in the cache
            if cached_added.get(d['indicator']):
                if d.get('last_at') in cached_added[d['indicator']]:
      Severity: Minor
      Found in cif/store/sqlite/indicator.py by radon

      Cyclomatic Complexity

      Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

      Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

      Construct Effect on CC Reasoning
      if +1 An if statement is a single decision.
      elif +1 The elif statement adds another decision.
      else +0 The else statement does not cause a new decision. The decision is at the if.
      for +1 There is a decision at the start of the loop.
      while +1 There is a decision at the while statement.
      except +1 Each except branch adds a new conditional path of execution.
      finally +0 The finally block is unconditionally executed.
      with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
      assert +1 The assert statement internally roughly equals a conditional statement.
      Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
      Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

      Source: http://radon.readthedocs.org/en/latest/intro.html

      Identical blocks of code found in 2 locations. Consider refactoring.
      Open

      Severity: Major
      Found in cif/hunter/spamhaus_ip.py and 1 other location - About 4 hrs to fix
      cif/hunter/spamhaus_fqdn.py on lines 0..18

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 76.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Identical blocks of code found in 2 locations. Consider refactoring.
      Open

      Severity: Major
      Found in cif/hunter/spamhaus_fqdn.py and 1 other location - About 4 hrs to fix
      cif/hunter/spamhaus_ip.py on lines 0..18

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 76.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 2 locations. Consider refactoring.
      Open

          def token_create_hunter(self, token=None, groups=GROUPS):
        logger.info('generating hunter token')
        rv = self.store.tokens.create({
            'username': u'hunter',
            'groups': groups,
      Severity: Major
      Found in cif/store/token.py and 1 other location - About 4 hrs to fix
      cif/store/token.py on lines 89..98

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 75.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 2 locations. Consider refactoring.
      Open

          def token_create_httpd(self, token=None, groups=GROUPS):
        logger.info('generating httpd token')
        rv = self.store.tokens.create({
            'username': u'httpd',
            'groups': groups,
      Severity: Major
      Found in cif/store/token.py and 1 other location - About 4 hrs to fix
      cif/store/token.py on lines 78..87

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 75.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 2 locations. Consider refactoring.
      Open

              elif i.itype == 'ipv6':
            match = re.search('^([\S|:]+)\/(\d+)$', i.indicator)  # TODO -- use ipaddress
            if match:
                ip = Ipv6(ip=match.group(1), mask=match.group(2), indicator=i)
            else:
      Severity: Major
      Found in cif/store/sqlite/indicator.py and 1 other location - About 4 hrs to fix
      cif/store/sqlite/indicator.py on lines 529..536

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 74.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 2 locations. Consider refactoring.
      Open

              if i.itype == 'ipv4':
            match = re.search('^(\S+)\/(\d+)$', i.indicator)  # TODO -- use ipaddress
            if match:
                ipv4 = Ipv4(ipv4=match.group(1), mask=match.group(2), indicator=i)
            else:
      Severity: Major
      Found in cif/store/sqlite/indicator.py and 1 other location - About 4 hrs to fix
      cif/store/sqlite/indicator.py on lines 538..545

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 74.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 2 locations. Consider refactoring.
      Open

          @api.doc('delete_token')
    @api.response(204, 'Deleted')
    def delete(self):
        """Delete a Token given its identifier"""
      Severity: Major
      Found in cif/httpd/tokens.py and 1 other location - About 3 hrs to fix
      cif/httpd/tokens.py on lines 125..141

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 71.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Severity
      Category
      Status
      Source
      Language