Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

• Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
• Code is considered more complex for each "break in the linear flow of the code"
• Code is considered more complex when "flow breaking structures are nested"

Further reading

• Cognitive Complexity docs
• Cognitive Complexity: A new way of measuring understandability

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 1270.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 228.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 145.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 45.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: triple-equals

Requires === and !== in place of == and !=.

Config

Two arguments may be optionally provided:

• "allow-null-check" allows == and != when comparing to null.
• "allow-undefined-check" allows == and != when comparing to undefined.

Examples

"triple-equals": true

"triple-equals": true,allow-null-check

"triple-equals": true,allow-undefined-check

Schema

{
  "type": "array",
  "items": {
    "type": "string",
    "enum": [
      "allow-null-check",
      "allow-undefined-check"
    ]
  },
  "minLength": 0,
  "maxLength": 2
}

For more information see this page.

Rule: triple-equals

Requires === and !== in place of == and !=.

Config

Two arguments may be optionally provided:

• "allow-null-check" allows == and != when comparing to null.
• "allow-undefined-check" allows == and != when comparing to undefined.

Examples

"triple-equals": true

"triple-equals": true,allow-null-check

"triple-equals": true,allow-undefined-check

Schema

{
  "type": "array",
  "items": {
    "type": "string",
    "enum": [
      "allow-null-check",
      "allow-undefined-check"
    ]
  },
  "minLength": 0,
  "maxLength": 2
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.