Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 94.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 94.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Rule: prefer-const

Requires that variable declarations use const instead of let and var if possible.

If a variable is only assigned to once when it is declared, it should be declared using 'const'

Notes

• Has Fix

Config

An optional object containing the property "destructuring" with two possible values:

• "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
• "all" - Only warns if all variables in destructuring can be const.

Examples

"prefer-const": true

"prefer-const": true,[object Object]

Schema

{
  "type": "object",
  "properties": {
    "destructuring": {
      "type": "string",
      "enum": [
        "all",
        "any"
      ]
    }
  }
}

For more information see this page.

Rule: comment-format

Enforces formatting rules for single-line comments.

Rationale

Helps maintain a consistent, readable style in your codebase.

Notes

• Has Fix

Config

Four arguments may be optionally provided:

• "check-space" requires that all single-line comments must begin with a space, as in // comment
  • note that for comments starting with multiple slashes, e.g. ///, leading slashes are ignored
  • TypeScript reference comments are ignored completely
• "check-lowercase" requires that the first non-whitespace character of a comment must be lowercase, if applicable.
• "check-uppercase" requires that the first non-whitespace character of a comment must be uppercase, if applicable.
• "allow-trailing-lowercase" allows that only the first comment of a series of comments needs to be uppercase.
  • requires "check-uppercase"
  • comments must start at the same position

Exceptions to "check-lowercase" or "check-uppercase" can be managed with object that may be passed as last argument.

One of two options can be provided in this object:

• "ignore-words" - array of strings - words that will be ignored at the beginning of the comment.
• "ignore-pattern" - string - RegExp pattern that will be ignored at the beginning of the comment.

Examples

"comment-format": true,check-space,check-uppercase,allow-trailing-lowercase

"comment-format": true,check-lowercase,[object Object]

"comment-format": true,check-lowercase,[object Object]

Schema

{
  "type": "array",
  "items": {
    "anyOf": [
      {
        "type": "string",
        "enum": [
          "check-space",
          "check-lowercase",
          "check-uppercase",
          "allow-trailing-lowercase"
        ]
      },
      {
        "type": "object",
        "properties": {
          "ignore-words": {
            "type": "array",
            "items": {
              "type": "string"
            }
          },
          "ignore-pattern": {
            "type": "string"
          }
        },
        "minProperties": 1,
        "maxProperties": 1
      }
    ]
  },
  "minLength": 1,
  "maxLength": 5
}

For more information see this page.

Rule: comment-format

Enforces formatting rules for single-line comments.

Rationale

Helps maintain a consistent, readable style in your codebase.

Notes

• Has Fix

Config

Four arguments may be optionally provided:

• "check-space" requires that all single-line comments must begin with a space, as in // comment
  • note that for comments starting with multiple slashes, e.g. ///, leading slashes are ignored
  • TypeScript reference comments are ignored completely
• "check-lowercase" requires that the first non-whitespace character of a comment must be lowercase, if applicable.
• "check-uppercase" requires that the first non-whitespace character of a comment must be uppercase, if applicable.
• "allow-trailing-lowercase" allows that only the first comment of a series of comments needs to be uppercase.
  • requires "check-uppercase"
  • comments must start at the same position

Exceptions to "check-lowercase" or "check-uppercase" can be managed with object that may be passed as last argument.

One of two options can be provided in this object:

• "ignore-words" - array of strings - words that will be ignored at the beginning of the comment.
• "ignore-pattern" - string - RegExp pattern that will be ignored at the beginning of the comment.

Examples

"comment-format": true,check-space,check-uppercase,allow-trailing-lowercase

"comment-format": true,check-lowercase,[object Object]

"comment-format": true,check-lowercase,[object Object]

Schema

{
  "type": "array",
  "items": {
    "anyOf": [
      {
        "type": "string",
        "enum": [
          "check-space",
          "check-lowercase",
          "check-uppercase",
          "allow-trailing-lowercase"
        ]
      },
      {
        "type": "object",
        "properties": {
          "ignore-words": {
            "type": "array",
            "items": {
              "type": "string"
            }
          },
          "ignore-pattern": {
            "type": "string"
          }
        },
        "minProperties": 1,
        "maxProperties": 1
      }
    ]
  },
  "minLength": 1,
  "maxLength": 5
}

For more information see this page.

Rule: prefer-const

Requires that variable declarations use const instead of let and var if possible.

If a variable is only assigned to once when it is declared, it should be declared using 'const'

Notes

• Has Fix

Config

An optional object containing the property "destructuring" with two possible values:

• "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
• "all" - Only warns if all variables in destructuring can be const.

Examples

"prefer-const": true

"prefer-const": true,[object Object]

Schema

{
  "type": "object",
  "properties": {
    "destructuring": {
      "type": "string",
      "enum": [
        "all",
        "any"
      ]
    }
  }
}

For more information see this page.

Rule: prefer-const

Requires that variable declarations use const instead of let and var if possible.

If a variable is only assigned to once when it is declared, it should be declared using 'const'

Notes

• Has Fix

Config

An optional object containing the property "destructuring" with two possible values:

• "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
• "all" - Only warns if all variables in destructuring can be const.

Examples

"prefer-const": true

"prefer-const": true,[object Object]

Schema

{
  "type": "object",
  "properties": {
    "destructuring": {
      "type": "string",
      "enum": [
        "all",
        "any"
      ]
    }
  }
}

For more information see this page.

Rule: prefer-const

Requires that variable declarations use const instead of let and var if possible.

If a variable is only assigned to once when it is declared, it should be declared using 'const'

Notes

• Has Fix

Config

An optional object containing the property "destructuring" with two possible values:

• "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
• "all" - Only warns if all variables in destructuring can be const.

Examples

"prefer-const": true

"prefer-const": true,[object Object]

Schema

{
  "type": "object",
  "properties": {
    "destructuring": {
      "type": "string",
      "enum": [
        "all",
        "any"
      ]
    }
  }
}

For more information see this page.

Rule: comment-format

Enforces formatting rules for single-line comments.

Rationale

Helps maintain a consistent, readable style in your codebase.

Notes

• Has Fix

Config

Four arguments may be optionally provided:

• "check-space" requires that all single-line comments must begin with a space, as in // comment
  • note that for comments starting with multiple slashes, e.g. ///, leading slashes are ignored
  • TypeScript reference comments are ignored completely
• "check-lowercase" requires that the first non-whitespace character of a comment must be lowercase, if applicable.
• "check-uppercase" requires that the first non-whitespace character of a comment must be uppercase, if applicable.
• "allow-trailing-lowercase" allows that only the first comment of a series of comments needs to be uppercase.
  • requires "check-uppercase"
  • comments must start at the same position

Exceptions to "check-lowercase" or "check-uppercase" can be managed with object that may be passed as last argument.

One of two options can be provided in this object:

• "ignore-words" - array of strings - words that will be ignored at the beginning of the comment.
• "ignore-pattern" - string - RegExp pattern that will be ignored at the beginning of the comment.

Examples

"comment-format": true,check-space,check-uppercase,allow-trailing-lowercase

"comment-format": true,check-lowercase,[object Object]

"comment-format": true,check-lowercase,[object Object]

Schema

{
  "type": "array",
  "items": {
    "anyOf": [
      {
        "type": "string",
        "enum": [
          "check-space",
          "check-lowercase",
          "check-uppercase",
          "allow-trailing-lowercase"
        ]
      },
      {
        "type": "object",
        "properties": {
          "ignore-words": {
            "type": "array",
            "items": {
              "type": "string"
            }
          },
          "ignore-pattern": {
            "type": "string"
          }
        },
        "minProperties": 1,
        "maxProperties": 1
      }
    ]
  },
  "minLength": 1,
  "maxLength": 5
}

For more information see this page.

Rule: comment-format

Enforces formatting rules for single-line comments.

Rationale

Helps maintain a consistent, readable style in your codebase.

Notes

• Has Fix

Config

Four arguments may be optionally provided:

• "check-space" requires that all single-line comments must begin with a space, as in // comment
  • note that for comments starting with multiple slashes, e.g. ///, leading slashes are ignored
  • TypeScript reference comments are ignored completely
• "check-lowercase" requires that the first non-whitespace character of a comment must be lowercase, if applicable.
• "check-uppercase" requires that the first non-whitespace character of a comment must be uppercase, if applicable.
• "allow-trailing-lowercase" allows that only the first comment of a series of comments needs to be uppercase.
  • requires "check-uppercase"
  • comments must start at the same position

Exceptions to "check-lowercase" or "check-uppercase" can be managed with object that may be passed as last argument.

One of two options can be provided in this object:

• "ignore-words" - array of strings - words that will be ignored at the beginning of the comment.
• "ignore-pattern" - string - RegExp pattern that will be ignored at the beginning of the comment.

Examples

"comment-format": true,check-space,check-uppercase,allow-trailing-lowercase

"comment-format": true,check-lowercase,[object Object]

"comment-format": true,check-lowercase,[object Object]

Schema

{
  "type": "array",
  "items": {
    "anyOf": [
      {
        "type": "string",
        "enum": [
          "check-space",
          "check-lowercase",
          "check-uppercase",
          "allow-trailing-lowercase"
        ]
      },
      {
        "type": "object",
        "properties": {
          "ignore-words": {
            "type": "array",
            "items": {
              "type": "string"
            }
          },
          "ignore-pattern": {
            "type": "string"
          }
        },
        "minProperties": 1,
        "maxProperties": 1
      }
    ]
  },
  "minLength": 1,
  "maxLength": 5
}

For more information see this page.

Rule: prefer-const

Requires that variable declarations use const instead of let and var if possible.

If a variable is only assigned to once when it is declared, it should be declared using 'const'

Notes

• Has Fix

Config

An optional object containing the property "destructuring" with two possible values:

• "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
• "all" - Only warns if all variables in destructuring can be const.

Examples

"prefer-const": true

"prefer-const": true,[object Object]

Schema

{
  "type": "object",
  "properties": {
    "destructuring": {
      "type": "string",
      "enum": [
        "all",
        "any"
      ]
    }
  }
}

For more information see this page.

Rule: prefer-const

Requires that variable declarations use const instead of let and var if possible.

If a variable is only assigned to once when it is declared, it should be declared using 'const'

Notes

• Has Fix

Config

An optional object containing the property "destructuring" with two possible values:

• "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
• "all" - Only warns if all variables in destructuring can be const.

Examples

"prefer-const": true

"prefer-const": true,[object Object]

Schema

{
  "type": "object",
  "properties": {
    "destructuring": {
      "type": "string",
      "enum": [
        "all",
        "any"
      ]
    }
  }
}

For more information see this page.