Function ProfileShareTab
has 70 lines of code (exceeds 25 allowed). Consider refactoring. Open
export const ProfileShareTab = (props: ProfileShareTabProps) => {
const [tab, setTab] = React.useState(0);
const [loading, setLoading] = React.useState(false);
const [sharedLinks, setSharedLinks] = React.useState<ISharedLink[]>([]);
- Create a ticketCreate a ticket
Function ProfileShareTab
has a Cognitive Complexity of 6 (exceeds 5 allowed). Consider refactoring. Open
export const ProfileShareTab = (props: ProfileShareTabProps) => {
const [tab, setTab] = React.useState(0);
const [loading, setLoading] = React.useState(false);
const [sharedLinks, setSharedLinks] = React.useState<ISharedLink[]>([]);
- Read upRead up
- Create a ticketCreate a ticket
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Similar blocks of code found in 2 locations. Consider refactoring. Open
const getSharedLinks = async () => {
setLoading(true);
try {
const {data} = await getSharedLinksService();
setSharedLinks(data.items.filter(item => item.resource === 'profile'));
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 99.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
<Tabs style={{display:'flex'}} value={tab} onChange={handleChangeTab} aria-label="basic tabs example">
<Tab label="Manage" {...a11yProps(0)} />
<Tab label="Add" {...a11yProps(1)} />
</Tabs>
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 84.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 3 locations. Consider refactoring. Open
export interface ISharedLink {
_id: string;
createdAt: string;
expiration: string;
memo: string;
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 69.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
const profileLink = generateProfileLink({
firstName: user.firstName,
lastName: user.lastName,
walletAddress: user.walletAddress,
xmppId: walletToUsername(user.walletAddress) + CONFERENCEDOMAIN,
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 59.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
function a11yProps(index: number) {
return {
id: `simple-tab-${index}`,
'aria-controls': `simple-tabpanel-${index}`,
};
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 45.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
" should be ' Open
<Tab label="Add" {...a11yProps(1)} />
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
An empty interface is equivalent to {}
. Open
interface ProfileShareTabProps {
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Rule: no-empty-interface
Forbids empty interfaces.
Rationale
An empty interface is equivalent to its supertype (or {}
).
Notes
- TypeScript Only
Config
Not configurable.
For more information see this page.
" should be ' Open
import { CONFERENCEDOMAIN } from "../../constants";
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
missing whitespace Open
React.useEffect(()=>{
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Rule: whitespace
Enforces whitespace style conventions.
Rationale
Helps maintain a readable, consistent style in your codebase.
Notes
- Has Fix
Config
Several arguments may be optionally provided:
-
"check-branch"
checks branching statements (if
/else
/for
/while
) are followed by whitespace. -
"check-decl"
checks that variable declarations have whitespace around the equals token. -
"check-operator"
checks for whitespace around operator tokens. -
"check-module"
checks for whitespace in import & export statements. -
"check-separator"
checks for whitespace after separator tokens (,
/;
). -
"check-rest-spread"
checks that there is no whitespace after rest/spread operator (...
). -
"check-type"
checks for whitespace before a variable type specification. -
"check-typecast"
checks for whitespace between a typecast and its target. -
"check-type-operator"
checks for whitespace between type operators|
and&
. -
"check-preblock"
checks for whitespace before the opening brace of a block. -
"check-postbrace"
checks for whitespace after an opening brace.
Examples
"whitespace": true,check-branch,check-operator,check-typecast
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"check-branch",
"check-decl",
"check-operator",
"check-module",
"check-separator",
"check-rest-spread",
"check-type",
"check-typecast",
"check-type-operator",
"check-preblock",
"check-postbrace"
]
},
"minLength": 0,
"maxLength": 11
}
For more information see this page.
missing whitespace Open
{tab === 0?
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Rule: whitespace
Enforces whitespace style conventions.
Rationale
Helps maintain a readable, consistent style in your codebase.
Notes
- Has Fix
Config
Several arguments may be optionally provided:
-
"check-branch"
checks branching statements (if
/else
/for
/while
) are followed by whitespace. -
"check-decl"
checks that variable declarations have whitespace around the equals token. -
"check-operator"
checks for whitespace around operator tokens. -
"check-module"
checks for whitespace in import & export statements. -
"check-separator"
checks for whitespace after separator tokens (,
/;
). -
"check-rest-spread"
checks that there is no whitespace after rest/spread operator (...
). -
"check-type"
checks for whitespace before a variable type specification. -
"check-typecast"
checks for whitespace between a typecast and its target. -
"check-type-operator"
checks for whitespace between type operators|
and&
. -
"check-preblock"
checks for whitespace before the opening brace of a block. -
"check-postbrace"
checks for whitespace after an opening brace.
Examples
"whitespace": true,check-branch,check-operator,check-typecast
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"check-branch",
"check-decl",
"check-operator",
"check-module",
"check-separator",
"check-rest-spread",
"check-type",
"check-typecast",
"check-type-operator",
"check-preblock",
"check-postbrace"
]
},
"minLength": 0,
"maxLength": 11
}
For more information see this page.
Missing semicolon Open
handleOpenToast()
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Rule: semicolon
Enforces consistent semicolon usage at the end of every statement.
Notes
- Has Fix
Config
One of the following arguments must be provided:
-
"always"
enforces semicolons at the end of every statement. -
"never"
disallows semicolons at the end of every statement except for when they are necessary.
The following arguments may be optionally provided:
-
"ignore-interfaces"
skips checking semicolons at the end of interface members. -
"ignore-bound-class-methods"
skips checking semicolons at the end of bound class methods. -
"strict-bound-class-methods"
disables any special handling of bound class methods and treats them as any other assignment. This option overrides"ignore-bound-class-methods"
.
Examples
"semicolon": true,always
"semicolon": true,never
"semicolon": true,always,ignore-interfaces
"semicolon": true,always,ignore-bound-class-methods
Schema
{
"type": "array",
"items": [
{
"type": "string",
"enum": [
"always",
"never"
]
},
{
"type": "string",
"enum": [
"ignore-interfaces"
]
}
],
"additionalItems": false
}
For more information see this page.
missing whitespace Open
/>:null
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Rule: whitespace
Enforces whitespace style conventions.
Rationale
Helps maintain a readable, consistent style in your codebase.
Notes
- Has Fix
Config
Several arguments may be optionally provided:
-
"check-branch"
checks branching statements (if
/else
/for
/while
) are followed by whitespace. -
"check-decl"
checks that variable declarations have whitespace around the equals token. -
"check-operator"
checks for whitespace around operator tokens. -
"check-module"
checks for whitespace in import & export statements. -
"check-separator"
checks for whitespace after separator tokens (,
/;
). -
"check-rest-spread"
checks that there is no whitespace after rest/spread operator (...
). -
"check-type"
checks for whitespace before a variable type specification. -
"check-typecast"
checks for whitespace between a typecast and its target. -
"check-type-operator"
checks for whitespace between type operators|
and&
. -
"check-preblock"
checks for whitespace before the opening brace of a block. -
"check-postbrace"
checks for whitespace after an opening brace.
Examples
"whitespace": true,check-branch,check-operator,check-typecast
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"check-branch",
"check-decl",
"check-operator",
"check-module",
"check-separator",
"check-rest-spread",
"check-type",
"check-typecast",
"check-type-operator",
"check-preblock",
"check-postbrace"
]
},
"minLength": 0,
"maxLength": 11
}
For more information see this page.
missing whitespace Open
React.useEffect(()=>{
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Rule: whitespace
Enforces whitespace style conventions.
Rationale
Helps maintain a readable, consistent style in your codebase.
Notes
- Has Fix
Config
Several arguments may be optionally provided:
-
"check-branch"
checks branching statements (if
/else
/for
/while
) are followed by whitespace. -
"check-decl"
checks that variable declarations have whitespace around the equals token. -
"check-operator"
checks for whitespace around operator tokens. -
"check-module"
checks for whitespace in import & export statements. -
"check-separator"
checks for whitespace after separator tokens (,
/;
). -
"check-rest-spread"
checks that there is no whitespace after rest/spread operator (...
). -
"check-type"
checks for whitespace before a variable type specification. -
"check-typecast"
checks for whitespace between a typecast and its target. -
"check-type-operator"
checks for whitespace between type operators|
and&
. -
"check-preblock"
checks for whitespace before the opening brace of a block. -
"check-postbrace"
checks for whitespace after an opening brace.
Examples
"whitespace": true,check-branch,check-operator,check-typecast
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"check-branch",
"check-decl",
"check-operator",
"check-module",
"check-separator",
"check-rest-spread",
"check-type",
"check-typecast",
"check-type-operator",
"check-preblock",
"check-postbrace"
]
},
"minLength": 0,
"maxLength": 11
}
For more information see this page.
missing whitespace Open
/>:null
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Rule: whitespace
Enforces whitespace style conventions.
Rationale
Helps maintain a readable, consistent style in your codebase.
Notes
- Has Fix
Config
Several arguments may be optionally provided:
-
"check-branch"
checks branching statements (if
/else
/for
/while
) are followed by whitespace. -
"check-decl"
checks that variable declarations have whitespace around the equals token. -
"check-operator"
checks for whitespace around operator tokens. -
"check-module"
checks for whitespace in import & export statements. -
"check-separator"
checks for whitespace after separator tokens (,
/;
). -
"check-rest-spread"
checks that there is no whitespace after rest/spread operator (...
). -
"check-type"
checks for whitespace before a variable type specification. -
"check-typecast"
checks for whitespace between a typecast and its target. -
"check-type-operator"
checks for whitespace between type operators|
and&
. -
"check-preblock"
checks for whitespace before the opening brace of a block. -
"check-postbrace"
checks for whitespace after an opening brace.
Examples
"whitespace": true,check-branch,check-operator,check-typecast
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"check-branch",
"check-decl",
"check-operator",
"check-module",
"check-separator",
"check-rest-spread",
"check-type",
"check-typecast",
"check-type-operator",
"check-preblock",
"check-postbrace"
]
},
"minLength": 0,
"maxLength": 11
}
For more information see this page.
" should be ' Open
<Tab label="Manage" {...a11yProps(0)} />
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
missing whitespace Open
/>:null
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Rule: whitespace
Enforces whitespace style conventions.
Rationale
Helps maintain a readable, consistent style in your codebase.
Notes
- Has Fix
Config
Several arguments may be optionally provided:
-
"check-branch"
checks branching statements (if
/else
/for
/while
) are followed by whitespace. -
"check-decl"
checks that variable declarations have whitespace around the equals token. -
"check-operator"
checks for whitespace around operator tokens. -
"check-module"
checks for whitespace in import & export statements. -
"check-separator"
checks for whitespace after separator tokens (,
/;
). -
"check-rest-spread"
checks that there is no whitespace after rest/spread operator (...
). -
"check-type"
checks for whitespace before a variable type specification. -
"check-typecast"
checks for whitespace between a typecast and its target. -
"check-type-operator"
checks for whitespace between type operators|
and&
. -
"check-preblock"
checks for whitespace before the opening brace of a block. -
"check-postbrace"
checks for whitespace after an opening brace.
Examples
"whitespace": true,check-branch,check-operator,check-typecast
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"check-branch",
"check-decl",
"check-operator",
"check-module",
"check-separator",
"check-rest-spread",
"check-type",
"check-typecast",
"check-type-operator",
"check-preblock",
"check-postbrace"
]
},
"minLength": 0,
"maxLength": 11
}
For more information see this page.
missing whitespace Open
},[])
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Rule: whitespace
Enforces whitespace style conventions.
Rationale
Helps maintain a readable, consistent style in your codebase.
Notes
- Has Fix
Config
Several arguments may be optionally provided:
-
"check-branch"
checks branching statements (if
/else
/for
/while
) are followed by whitespace. -
"check-decl"
checks that variable declarations have whitespace around the equals token. -
"check-operator"
checks for whitespace around operator tokens. -
"check-module"
checks for whitespace in import & export statements. -
"check-separator"
checks for whitespace after separator tokens (,
/;
). -
"check-rest-spread"
checks that there is no whitespace after rest/spread operator (...
). -
"check-type"
checks for whitespace before a variable type specification. -
"check-typecast"
checks for whitespace between a typecast and its target. -
"check-type-operator"
checks for whitespace between type operators|
and&
. -
"check-preblock"
checks for whitespace before the opening brace of a block. -
"check-postbrace"
checks for whitespace after an opening brace.
Examples
"whitespace": true,check-branch,check-operator,check-typecast
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"check-branch",
"check-decl",
"check-operator",
"check-module",
"check-separator",
"check-rest-spread",
"check-type",
"check-typecast",
"check-type-operator",
"check-preblock",
"check-postbrace"
]
},
"minLength": 0,
"maxLength": 11
}
For more information see this page.
missing whitespace Open
{tab === 1?
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Rule: whitespace
Enforces whitespace style conventions.
Rationale
Helps maintain a readable, consistent style in your codebase.
Notes
- Has Fix
Config
Several arguments may be optionally provided:
-
"check-branch"
checks branching statements (if
/else
/for
/while
) are followed by whitespace. -
"check-decl"
checks that variable declarations have whitespace around the equals token. -
"check-operator"
checks for whitespace around operator tokens. -
"check-module"
checks for whitespace in import & export statements. -
"check-separator"
checks for whitespace after separator tokens (,
/;
). -
"check-rest-spread"
checks that there is no whitespace after rest/spread operator (...
). -
"check-type"
checks for whitespace before a variable type specification. -
"check-typecast"
checks for whitespace between a typecast and its target. -
"check-type-operator"
checks for whitespace between type operators|
and&
. -
"check-preblock"
checks for whitespace before the opening brace of a block. -
"check-postbrace"
checks for whitespace after an opening brace.
Examples
"whitespace": true,check-branch,check-operator,check-typecast
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"check-branch",
"check-decl",
"check-operator",
"check-module",
"check-separator",
"check-rest-spread",
"check-type",
"check-typecast",
"check-type-operator",
"check-preblock",
"check-postbrace"
]
},
"minLength": 0,
"maxLength": 11
}
For more information see this page.
missing whitespace Open
/>:null
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Rule: whitespace
Enforces whitespace style conventions.
Rationale
Helps maintain a readable, consistent style in your codebase.
Notes
- Has Fix
Config
Several arguments may be optionally provided:
-
"check-branch"
checks branching statements (if
/else
/for
/while
) are followed by whitespace. -
"check-decl"
checks that variable declarations have whitespace around the equals token. -
"check-operator"
checks for whitespace around operator tokens. -
"check-module"
checks for whitespace in import & export statements. -
"check-separator"
checks for whitespace after separator tokens (,
/;
). -
"check-rest-spread"
checks that there is no whitespace after rest/spread operator (...
). -
"check-type"
checks for whitespace before a variable type specification. -
"check-typecast"
checks for whitespace between a typecast and its target. -
"check-type-operator"
checks for whitespace between type operators|
and&
. -
"check-preblock"
checks for whitespace before the opening brace of a block. -
"check-postbrace"
checks for whitespace after an opening brace.
Examples
"whitespace": true,check-branch,check-operator,check-typecast
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"check-branch",
"check-decl",
"check-operator",
"check-module",
"check-separator",
"check-rest-spread",
"check-type",
"check-typecast",
"check-type-operator",
"check-preblock",
"check-postbrace"
]
},
"minLength": 0,
"maxLength": 11
}
For more information see this page.
Missing semicolon Open
getSharedLinks()
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Rule: semicolon
Enforces consistent semicolon usage at the end of every statement.
Notes
- Has Fix
Config
One of the following arguments must be provided:
-
"always"
enforces semicolons at the end of every statement. -
"never"
disallows semicolons at the end of every statement except for when they are necessary.
The following arguments may be optionally provided:
-
"ignore-interfaces"
skips checking semicolons at the end of interface members. -
"ignore-bound-class-methods"
skips checking semicolons at the end of bound class methods. -
"strict-bound-class-methods"
disables any special handling of bound class methods and treats them as any other assignment. This option overrides"ignore-bound-class-methods"
.
Examples
"semicolon": true,always
"semicolon": true,never
"semicolon": true,always,ignore-interfaces
"semicolon": true,always,ignore-bound-class-methods
Schema
{
"type": "array",
"items": [
{
"type": "string",
"enum": [
"always",
"never"
]
},
{
"type": "string",
"enum": [
"ignore-interfaces"
]
}
],
"additionalItems": false
}
For more information see this page.
file should end with a newline Open
};
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Rule: eofline
Ensures the file ends with a newline.
Fix for single-line files is not supported.
Rationale
It is a standard convention to end files with a newline.
Notes
- Has Fix
Config
Not configurable.
Examples
"eofline": true
For more information see this page.
" should be ' Open
<Tabs style={{display:'flex'}} value={tab} onChange={handleChangeTab} aria-label="basic tabs example">
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
Missing semicolon Open
const {data} = await deleteSharedLink(linkToken)
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Rule: semicolon
Enforces consistent semicolon usage at the end of every statement.
Notes
- Has Fix
Config
One of the following arguments must be provided:
-
"always"
enforces semicolons at the end of every statement. -
"never"
disallows semicolons at the end of every statement except for when they are necessary.
The following arguments may be optionally provided:
-
"ignore-interfaces"
skips checking semicolons at the end of interface members. -
"ignore-bound-class-methods"
skips checking semicolons at the end of bound class methods. -
"strict-bound-class-methods"
disables any special handling of bound class methods and treats them as any other assignment. This option overrides"ignore-bound-class-methods"
.
Examples
"semicolon": true,always
"semicolon": true,never
"semicolon": true,always,ignore-interfaces
"semicolon": true,always,ignore-bound-class-methods
Schema
{
"type": "array",
"items": [
{
"type": "string",
"enum": [
"always",
"never"
]
},
{
"type": "string",
"enum": [
"ignore-interfaces"
]
}
],
"additionalItems": false
}
For more information see this page.
missing whitespace Open
<Tabs style={{display:'flex'}} value={tab} onChange={handleChangeTab} aria-label="basic tabs example">
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Rule: whitespace
Enforces whitespace style conventions.
Rationale
Helps maintain a readable, consistent style in your codebase.
Notes
- Has Fix
Config
Several arguments may be optionally provided:
-
"check-branch"
checks branching statements (if
/else
/for
/while
) are followed by whitespace. -
"check-decl"
checks that variable declarations have whitespace around the equals token. -
"check-operator"
checks for whitespace around operator tokens. -
"check-module"
checks for whitespace in import & export statements. -
"check-separator"
checks for whitespace after separator tokens (,
/;
). -
"check-rest-spread"
checks that there is no whitespace after rest/spread operator (...
). -
"check-type"
checks for whitespace before a variable type specification. -
"check-typecast"
checks for whitespace between a typecast and its target. -
"check-type-operator"
checks for whitespace between type operators|
and&
. -
"check-preblock"
checks for whitespace before the opening brace of a block. -
"check-postbrace"
checks for whitespace after an opening brace.
Examples
"whitespace": true,check-branch,check-operator,check-typecast
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"check-branch",
"check-decl",
"check-operator",
"check-module",
"check-separator",
"check-rest-spread",
"check-type",
"check-typecast",
"check-type-operator",
"check-preblock",
"check-postbrace"
]
},
"minLength": 0,
"maxLength": 11
}
For more information see this page.
Missing semicolon Open
})
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Rule: semicolon
Enforces consistent semicolon usage at the end of every statement.
Notes
- Has Fix
Config
One of the following arguments must be provided:
-
"always"
enforces semicolons at the end of every statement. -
"never"
disallows semicolons at the end of every statement except for when they are necessary.
The following arguments may be optionally provided:
-
"ignore-interfaces"
skips checking semicolons at the end of interface members. -
"ignore-bound-class-methods"
skips checking semicolons at the end of bound class methods. -
"strict-bound-class-methods"
disables any special handling of bound class methods and treats them as any other assignment. This option overrides"ignore-bound-class-methods"
.
Examples
"semicolon": true,always
"semicolon": true,never
"semicolon": true,always,ignore-interfaces
"semicolon": true,always,ignore-bound-class-methods
Schema
{
"type": "array",
"items": [
{
"type": "string",
"enum": [
"always",
"never"
]
},
{
"type": "string",
"enum": [
"ignore-interfaces"
]
}
],
"additionalItems": false
}
For more information see this page.
Missing semicolon Open
},[])
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Rule: semicolon
Enforces consistent semicolon usage at the end of every statement.
Notes
- Has Fix
Config
One of the following arguments must be provided:
-
"always"
enforces semicolons at the end of every statement. -
"never"
disallows semicolons at the end of every statement except for when they are necessary.
The following arguments may be optionally provided:
-
"ignore-interfaces"
skips checking semicolons at the end of interface members. -
"ignore-bound-class-methods"
skips checking semicolons at the end of bound class methods. -
"strict-bound-class-methods"
disables any special handling of bound class methods and treats them as any other assignment. This option overrides"ignore-bound-class-methods"
.
Examples
"semicolon": true,always
"semicolon": true,never
"semicolon": true,always,ignore-interfaces
"semicolon": true,always,ignore-bound-class-methods
Schema
{
"type": "array",
"items": [
{
"type": "string",
"enum": [
"always",
"never"
]
},
{
"type": "string",
"enum": [
"ignore-interfaces"
]
}
],
"additionalItems": false
}
For more information see this page.