davidbegin/downup

This cop checks if the length a class exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.

This cop checks if the length of a method exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.

This cop checks that the ABC size of methods is not higher than the configured maximum. The ABC size is based on assignments, branches (method calls), and conditions. See http://c2.com/cgi/wiki?AbcMetric

This cop checks if the length of a method exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.

This cop checks that the ABC size of methods is not higher than the configured maximum. The ABC size is based on assignments, branches (method calls), and conditions. See http://c2.com/cgi/wiki?AbcMetric

This cop checks if the length of a method exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.

This cop checks if the length of a method exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.

This cop checks that the ABC size of methods is not higher than the configured maximum. The ABC size is based on assignments, branches (method calls), and conditions. See http://c2.com/cgi/wiki?AbcMetric

This cop checks that the ABC size of methods is not higher than the configured maximum. The ABC size is based on assignments, branches (method calls), and conditions. See http://c2.com/cgi/wiki?AbcMetric

This cop checks that the cyclomatic complexity of methods is not higher than the configured maximum. The cyclomatic complexity is the number of linearly independent paths through a method. The algorithm counts decision points and adds one.

An if statement (or unless or ?:) increases the complexity by one. An else branch does not, since it doesn't add a decision point. The && operator (or keyword and) can be converted to a nested if statement, and ||/or is shorthand for a sequence of ifs, so they also add one. Loops can be said to have an exit condition, so they add one.

This cop checks if the length of a method exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.

This cop checks for methods with too many parameters. The maximum number of parameters is configurable. Keyword arguments can optionally be excluded from the total count.

Place when conditions that use splat at the end of the list of when branches.

Ruby has to allocate memory for the splat expansion every time that the case when statement is run. Since Ruby does not support fall through inside of case when, like some other languages do, the order of the when branches does not matter. By placing any splat expansions at the end of the list of when branches we will reduce the number of times that memory has to be allocated for the expansion.

This is not a guaranteed performance improvement. If the data being processed by the case condition is normalized in a manner that favors hitting a condition in the splat expansion, it is possible that moving the splat condition to the end will use more memory, and run slightly slower.

Example:

# bad
case foo
when *condition
  bar
when baz
  foobar
end

case foo
when *[1, 2, 3, 4]
  bar
when 5
  baz
end

# good
case foo
when baz
  foobar
when *condition
  bar
end

case foo
when 1, 2, 3, 4
  bar
when 5
  baz
end

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 27.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

This cop checks for unused method arguments.

Example:

# bad

def some_method(used, unused, _unused_but_allowed)
  puts used
end

Example:

# good

def some_method(used, _unused, _unused_but_allowed)
  puts used
end

Check for uses of braces or do/end around single line or multi-line blocks.

Example: EnforcedStyle: linecountbased (default)

# bad - single line block
items.each do |item| item / 5 end

# good - single line block
items.each { |item| item / 5 }

# bad - multi-line block
things.map { |thing|
  something = thing.some_method
  process(something)
}

# good - multi-line block
things.map do |thing|
  something = thing.some_method
  process(something)
end

Example: EnforcedStyle: semantic

# Prefer `do...end` over `{...}` for procedural blocks.

# return value is used/assigned
# bad
foo = map do |x|
  x
end
puts (map do |x|
  x
end)

# return value is not used out of scope
# good
map do |x|
  x
end

# Prefer `{...}` over `do...end` for functional blocks.

# return value is not used out of scope
# bad
each { |x|
  x
}

# return value is used/assigned
# good
foo = map { |x|
  x
}
map { |x|
  x
}.inspect

Example: EnforcedStyle: bracesforchaining

# bad
words.each do |word|
  word.flip.flop
end.join("-")

# good
words.each { |word|
  word.flip.flop
}.join("-")

Checks that braces used for hash literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space

# The `space` style enforces that hash literals have
# surrounding space.

# bad
h = {a: 1, b: 2}

# good
h = { a: 1, b: 2 }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that hash literals have
# no surrounding space.

# bad
h = { a: 1, b: 2 }

# good
h = {a: 1, b: 2}

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.

# bad
h = { a: { b: 2 } }

# good
h = { a: { b: 2 }}

This cop checks for return from an ensure block.

Example:

# bad

begin
  do_something
ensure
  do_something_else
  return
end

Example:

# good

begin
  do_something
ensure
  do_something_else
end

This cops checks for uses of Proc.new where Kernel#proc would be more appropriate.

Example:

# bad
p = Proc.new { |n| puts n }

# good
p = proc { |n| puts n }

Check for uses of braces or do/end around single line or multi-line blocks.

Example: EnforcedStyle: linecountbased (default)

# bad - single line block
items.each do |item| item / 5 end

# good - single line block
items.each { |item| item / 5 }

# bad - multi-line block
things.map { |thing|
  something = thing.some_method
  process(something)
}

# good - multi-line block
things.map do |thing|
  something = thing.some_method
  process(something)
end

Example: EnforcedStyle: semantic

# Prefer `do...end` over `{...}` for procedural blocks.

# return value is used/assigned
# bad
foo = map do |x|
  x
end
puts (map do |x|
  x
end)

# return value is not used out of scope
# good
map do |x|
  x
end

# Prefer `{...}` over `do...end` for functional blocks.

# return value is not used out of scope
# bad
each { |x|
  x
}

# return value is used/assigned
# good
foo = map { |x|
  x
}
map { |x|
  x
}.inspect

Example: EnforcedStyle: bracesforchaining

# bad
words.each do |word|
  word.flip.flop
end.join("-")

# good
words.each { |word|
  word.flip.flop
}.join("-")

This cop checks for braces around the last parameter in a method call if the last parameter is a hash. It supports braces, no_braces and context_dependent styles.

Example: EnforcedStyle: braces

# The `braces` style enforces braces around all method
# parameters that are hashes.

# bad
some_method(x, y, a: 1, b: 2)

# good
some_method(x, y, {a: 1, b: 2})

Example: EnforcedStyle: no_braces (default)

# The `no_braces` style checks that the last parameter doesn't
# have braces around it.

# bad
some_method(x, y, {a: 1, b: 2})

# good
some_method(x, y, a: 1, b: 2)

Example: EnforcedStyle: context_dependent

# The `context_dependent` style checks that the last parameter
# doesn't have braces around it, but requires braces if the
# second to last parameter is also a hash literal.

# bad
some_method(x, y, {a: 1, b: 2})
some_method(x, y, {a: 1, b: 2}, a: 1, b: 2)

# good
some_method(x, y, a: 1, b: 2)
some_method(x, y, {a: 1, b: 2}, {a: 1, b: 2})

If the else branch of a conditional consists solely of an if node, it can be combined with the else to become an elsif. This helps to keep the nesting level from getting too deep.

Example:

# bad
if condition_a
  action_a
else
  if condition_b
    action_b
  else
    action_c
  end
end

# good
if condition_a
  action_a
elsif condition_b
  action_b
else
  action_c
end

Checks for uses of the then keyword in multi-line if statements.

Example:

# bad
# This is considered bad practice.
if cond then
end

# good
# If statements can contain `then` on the same line.
if cond then a
elsif cond then b
end

Checks that braces used for hash literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space

# The `space` style enforces that hash literals have
# surrounding space.

# bad
h = {a: 1, b: 2}

# good
h = { a: 1, b: 2 }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that hash literals have
# no surrounding space.

# bad
h = { a: 1, b: 2 }

# good
h = {a: 1, b: 2}

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.

# bad
h = { a: { b: 2 } }

# good
h = { a: { b: 2 }}

This cop checks for missing top-level documentation of classes and modules. Classes with no body are exempt from the check and so are namespace modules - modules that have nothing in their bodies except classes, other modules, or constant definitions.

The documentation requirement is annulled if the class or module has a "#:nodoc:" comment next to it. Likewise, "#:nodoc: all" does the same for all its children.

Example:

# bad
class Person
  # ...
end

# good
# Description/Explanation of Person class
class Person
  # ...
end

This cop (by default) checks for uses of methods Hash#haskey? and Hash#hasvalue? where it enforces Hash#key? and Hash#value? It is configurable to enforce the inverse, using verbose method names also.

Example: EnforcedStyle: short (default)

# bad Hash#haskey? Hash#hasvalue?

# good Hash#key? Hash#value?

Example: EnforcedStyle: verbose

# bad Hash#key? Hash#value?

# good Hash#haskey? Hash#hasvalue?

This cop checks for uses of rescue in its modifier form.

Example:

# bad
some_method rescue handle_error

# good
begin
  some_method
rescue
  handle_error
end

This cop (by default) checks for uses of methods Hash#haskey? and Hash#hasvalue? where it enforces Hash#key? and Hash#value? It is configurable to enforce the inverse, using verbose method names also.

Example: EnforcedStyle: short (default)

# bad Hash#haskey? Hash#hasvalue?

# good Hash#key? Hash#value?

Example: EnforcedStyle: verbose

# bad Hash#key? Hash#value?

# good Hash#haskey? Hash#hasvalue?

Checks that block braces have or don't have a space before the opening brace depending on configuration.

Example:

# bad
foo.map{ |a|
  a.bar.to_s
}

# good
foo.map { |a|
  a.bar.to_s
}

This cop checks whether the end keywords are aligned properly.

Three modes are supported through the EnforcedStyleAlignWith configuration parameter:

If it's set to keyword (which is the default), the end shall be aligned with the start of the keyword (if, class, etc.).

If it's set to variable the end shall be aligned with the left-hand-side of the variable assignment, if there is one.

If it's set to start_of_line, the end shall be aligned with the start of the line where the matching keyword appears.

Example: EnforcedStyleAlignWith: keyword (default)

# bad

variable = if true
    end

# good

variable = if true
           end

Example: EnforcedStyleAlignWith: variable

# bad

variable = if true
    end

# good

variable = if true
end

Example: EnforcedStyleAlignWith: startofline

# bad

variable = if true
    end

# good

puts(if true
end)

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

This cop checks for the use of Kernel#eval and Binding#eval.

Example:

# bad

eval(something)
binding.eval(something)

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

This cop checks for trailing comma in argument lists.

Example: EnforcedStyleForMultiline: consistent_comma

# bad
method(1, 2,)

# good
method(
  1, 2,
  3,
)

# good
method(
  1,
  2,
)

Example: EnforcedStyleForMultiline: comma

# bad
method(1, 2,)

# good
method(
  1,
  2,
)

Example: EnforcedStyleForMultiline: no_comma (default)

# bad
method(1, 2,)

# good
method(
  1,
  2
)

This cop checks for uses of rescue in its modifier form.

Example:

# bad
some_method rescue handle_error

# good
begin
  some_method
rescue
  handle_error
end

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"