Method initAttributes has a Cognitive Complexity of 220 (exceeds 20 allowed). Consider refactoring. Open
override fun <GRAPH_TYPE : GeneratedMessageV3, NODE_TYPE : GeneratedMessageV3, OP_DEF_TYPE : GeneratedMessageV3, TENSOR_TYPE : GeneratedMessageV3, ATTR_DEF_TYPE : GeneratedMessageV3, ATTR_VALUE_TYPE : GeneratedMessageV3, DATA_TYPE : ProtocolMessageEnum> initAttributes(
df: DifferentialFunction,
sd: SameDiff,
descriptorAndContext: Pair<MappingContext<GRAPH_TYPE, NODE_TYPE, OP_DEF_TYPE, TENSOR_TYPE, ATTR_DEF_TYPE, ATTR_VALUE_TYPE, DATA_TYPE>, OpNamespace.OpDescriptor>
) {- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Method initAttributes has 249 lines of code (exceeds 25 allowed). Consider refactoring. Open
override fun <GRAPH_TYPE : GeneratedMessageV3, NODE_TYPE : GeneratedMessageV3, OP_DEF_TYPE : GeneratedMessageV3, TENSOR_TYPE : GeneratedMessageV3, ATTR_DEF_TYPE : GeneratedMessageV3, ATTR_VALUE_TYPE : GeneratedMessageV3, DATA_TYPE : ProtocolMessageEnum> initAttributes(
df: DifferentialFunction,
sd: SameDiff,
descriptorAndContext: Pair<MappingContext<GRAPH_TYPE, NODE_TYPE, OP_DEF_TYPE, TENSOR_TYPE, ATTR_DEF_TYPE, ATTR_VALUE_TYPE, DATA_TYPE>, OpNamespace.OpDescriptor>
) {File DefaultImportRunner.kt has 288 lines of code (exceeds 250 allowed). Consider refactoring. Open
/*
* ******************************************************************************
* *
* *
* * This program and the accompanying materials are made available under theAvoid deeply nested control flow statements. Open
val name = if(mappingContext.graph().hasConstantInitializer(input)) {
input
} else {
"${input}:0"
}Avoid deeply nested control flow statements. Open
if (arg.variableType != VariableType.ARRAY) {
if (arg.shape == null) {
val emptyLongArray = LongArray(0)
arg.setShape(*emptyLongArray)
}Avoid deeply nested control flow statements. Open
if(!sd.hasVariable(input)) {
if(mappingContext.graph().hasConstantInitializer("${input}:0") || sd.hasVariable(name)) {
sd.renameVariable(name,input)
}
}Consider simplifying this complex logical expression. Open
if(df.opType() == Op.Type.REDUCE_LONG ||
df.opType() == Op.Type.REDUCE_BOOL ||
df.opType() == Op.Type.REDUCE_FLOAT ||
df.opType() == Op.Type.REDUCE_SAME ||
df.opType() == Op.Type.INDEXREDUCE && df.args().size > 1) {Identical blocks of code found in 2 locations. Consider refactoring. Open
when (argDescriptor.argType) {
OpNamespace.ArgDescriptor.ArgType.DOUBLE -> {
val nd4jScalarValue = Nd4j.scalar(argDescriptor.doubleValue).castTo(dtype)
ReflectionUtils.setField(scalarField, df, nd4jScalarValue)
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 617.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
when (argDescriptor.argType) {
OpNamespace.ArgDescriptor.ArgType.DOUBLE -> {
val nd4jScalarValue = Nd4j.scalar(argDescriptor.doubleValue).castTo(dtype)
ReflectionUtils.setField(scalarField, df, nd4jScalarValue)
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 617.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
override fun <GRAPH_TYPE : GeneratedMessageV3, NODE_TYPE : GeneratedMessageV3, OP_DEF_TYPE : GeneratedMessageV3, TENSOR_TYPE : GeneratedMessageV3, ATTR_DEF_TYPE : GeneratedMessageV3, ATTR_VALUE_TYPE : GeneratedMessageV3, DATA_TYPE : ProtocolMessageEnum> initAttributes(
df: DifferentialFunction,
sd: SameDiff,
descriptorAndContext: Pair<MappingContext<GRAPH_TYPE, NODE_TYPE, OP_DEF_TYPE, TENSOR_TYPE, ATTR_DEF_TYPE, ATTR_VALUE_TYPE, DATA_TYPE>, OpNamespace.OpDescriptor>
) {- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 135.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
"x", "y", "z" -> {
val createdNDArray = mappingContext.tensorInputFor(argDescriptor.name).toNd4jNDArray()
ReflectionUtils.setField(field, df, createdNDArray)
}- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 92.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
"x", "y", "z" -> {
val createdNDArray = mappingContext.tensorInputFor(argDescriptor.name).toNd4jNDArray()
ReflectionUtils.setField(field, df, createdNDArray)
}- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 92.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
OpNamespace.ArgDescriptor.ArgType.INT64, OpNamespace.ArgDescriptor.ArgType.INT32 -> {
listOfArgsSortedByIndex.forEach { dynamicCustomOp.addIArgument(it.int64Value) }
}- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 86.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
OpNamespace.ArgDescriptor.ArgType.DOUBLE, OpNamespace.ArgDescriptor.ArgType.FLOAT -> {
listOfArgsSortedByIndex.forEach { dynamicCustomOp.addTArgument(it.doubleValue) }
}- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 86.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 8 locations. Consider refactoring. Open
DATA_TYPE: ProtocolMessageEnum> : ImportRunner<GRAPH_TYPE,
NODE_TYPE,
OP_DEF_TYPE,
TENSOR_TYPE,
ATTR_DEF_TYPE,- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 84.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76