Line length Open
* `grunt jscs`: Style check of the project code with [jscs](https://github.com/jscs-dev/node-jscs). It uses the [google code style](https://google-styleguide.googlecode.com/svn/trunk/javascriptguide.xml) as a preset.- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks and/or tables parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Spaces after list markers Open
* Remember to refactor after each passing test- Read upRead up
- Exclude checks
MD030 - Spaces after list markers
Tags: ol, ul, whitespace
Aliases: list-marker-space
Parameters: ulsingle, olsingle, ulmulti, olmulti (number, default 1)
This rule checks for the number of spaces between a list marker (e.g. '-',
'*', '+' or '1.') and the text of the list item.
The number of spaces checked for depends on the document style in use, but the default is 1 space after any list marker:
* Foo
* Bar
* Baz
1. Foo
1. Bar
1. Baz
1. Foo
* Bar
1. BazA document style may change the number of spaces after unordered list items and ordered list items independently, as well as based on whether the content of every item in the list consists of a single paragraph, or multiple paragraphs (including sub-lists and code blocks).
For example, the style guide at http://www.cirosantilli.com/markdown-styleguide/#spaces-after-marker specifies that 1 space after the list marker should be used if every item in the list fits within a single paragraph, but to use 2 or 3 spaces (for ordered and unordered lists respectively) if there are multiple paragraphs of content inside the list:
* Foo
* Bar
* Baz
vs.
* Foo
Second paragraph
* Bar
or
1. Foo
Second paragraph
1. BarTo fix this, ensure the correct number of spaces are used after list marker for your selected document style.
Line length Open
Stop here if you are a beginner. Continue if you can finish the steps so far in less than 30 minutes.- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks and/or tables parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Spaces after list markers Open
* to change a delimiter, the beginning of the string will contain a separate line that looks like this: ```"//[delimiter]\n[numbers…]"``` for example ```"//;\n1;2"``` should return three where the default delimiter is ';' .- Read upRead up
- Exclude checks
MD030 - Spaces after list markers
Tags: ol, ul, whitespace
Aliases: list-marker-space
Parameters: ulsingle, olsingle, ulmulti, olmulti (number, default 1)
This rule checks for the number of spaces between a list marker (e.g. '-',
'*', '+' or '1.') and the text of the list item.
The number of spaces checked for depends on the document style in use, but the default is 1 space after any list marker:
* Foo
* Bar
* Baz
1. Foo
1. Bar
1. Baz
1. Foo
* Bar
1. BazA document style may change the number of spaces after unordered list items and ordered list items independently, as well as based on whether the content of every item in the list consists of a single paragraph, or multiple paragraphs (including sub-lists and code blocks).
For example, the style guide at http://www.cirosantilli.com/markdown-styleguide/#spaces-after-marker specifies that 1 space after the list marker should be used if every item in the list fits within a single paragraph, but to use 2 or 3 spaces (for ordered and unordered lists respectively) if there are multiple paragraphs of content inside the list:
* Foo
* Bar
* Baz
vs.
* Foo
Second paragraph
* Bar
or
1. Foo
Second paragraph
1. BarTo fix this, ensure the correct number of spaces are used after list marker for your selected document style.
Headers should be surrounded by blank lines Open
## License- Read upRead up
- Exclude checks
MD022 - Headers should be surrounded by blank lines
Tags: headers, blank_lines
Aliases: blanks-around-headers
This rule is triggered when headers (any style) are either not preceded or not followed by a blank line:
# Header 1
Some text
Some more text
## Header 2To fix this, ensure that all headers have a blank line both before and after (except where the header is at the beginning or end of the document):
# Header 1
Some text
Some more text
## Header 2Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse headers that don't have a blank line before, and will parse them as regular text.
Lists should be surrounded by blank lines Open
* Create a simple String calculator with a method int Add(string numbers)- Read upRead up
- Exclude checks
MD032 - Lists should be surrounded by blank lines
Tags: bullet, ul, ol, blank_lines
Aliases: blanks-around-lists
This rule is triggered when lists (of any kind) are either not preceded or not followed by a blank line:
Some text
* Some
* List
1. Some
2. List
Some textTo fix this, ensure that all lists have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
* Some
* List
1. Some
2. List
Some textRationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse lists that don't have blank lines before and after them.
Note: List items without hanging indents are a violation of this rule; list items with hanging indents are okay:
* This is
not okay
* This is
okayLine length Open
* Delimiters can be of any length with the following format: ```"//[delimiter]\n"``` for example: ```"//[***]\n1***2***3"``` should return 6- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks and/or tables parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
You need an installation of node.js to run the project. I suggest to install one using [nvm](https://github.com/creationix/nvm).- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks and/or tables parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Spaces after list markers Open
* the following input is NOT ok: ```"1,\n"``` (not need to prove it - just clarifying)- Read upRead up
- Exclude checks
MD030 - Spaces after list markers
Tags: ol, ul, whitespace
Aliases: list-marker-space
Parameters: ulsingle, olsingle, ulmulti, olmulti (number, default 1)
This rule checks for the number of spaces between a list marker (e.g. '-',
'*', '+' or '1.') and the text of the list item.
The number of spaces checked for depends on the document style in use, but the default is 1 space after any list marker:
* Foo
* Bar
* Baz
1. Foo
1. Bar
1. Baz
1. Foo
* Bar
1. BazA document style may change the number of spaces after unordered list items and ordered list items independently, as well as based on whether the content of every item in the list consists of a single paragraph, or multiple paragraphs (including sub-lists and code blocks).
For example, the style guide at http://www.cirosantilli.com/markdown-styleguide/#spaces-after-marker specifies that 1 space after the list marker should be used if every item in the list fits within a single paragraph, but to use 2 or 3 spaces (for ordered and unordered lists respectively) if there are multiple paragraphs of content inside the list:
* Foo
* Bar
* Baz
vs.
* Foo
Second paragraph
* Bar
or
1. Foo
Second paragraph
1. BarTo fix this, ensure the correct number of spaces are used after list marker for your selected document style.
Spaces after list markers Open
* the first line is optional. all existing scenarios should still be supported- Read upRead up
- Exclude checks
MD030 - Spaces after list markers
Tags: ol, ul, whitespace
Aliases: list-marker-space
Parameters: ulsingle, olsingle, ulmulti, olmulti (number, default 1)
This rule checks for the number of spaces between a list marker (e.g. '-',
'*', '+' or '1.') and the text of the list item.
The number of spaces checked for depends on the document style in use, but the default is 1 space after any list marker:
* Foo
* Bar
* Baz
1. Foo
1. Bar
1. Baz
1. Foo
* Bar
1. BazA document style may change the number of spaces after unordered list items and ordered list items independently, as well as based on whether the content of every item in the list consists of a single paragraph, or multiple paragraphs (including sub-lists and code blocks).
For example, the style guide at http://www.cirosantilli.com/markdown-styleguide/#spaces-after-marker specifies that 1 space after the list marker should be used if every item in the list fits within a single paragraph, but to use 2 or 3 spaces (for ordered and unordered lists respectively) if there are multiple paragraphs of content inside the list:
* Foo
* Bar
* Baz
vs.
* Foo
Second paragraph
* Bar
or
1. Foo
Second paragraph
1. BarTo fix this, ensure the correct number of spaces are used after list marker for your selected document style.
Line length Open
* Calling Add with a negative number will throw an exception "negatives not allowed" - and the negative that was passed.if there are multiple negatives, show all of them in the exception message.- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks and/or tables parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Spaces after list markers Open
* Start with the simplest test case of an empty string and move to 1 and two numbers- Read upRead up
- Exclude checks
MD030 - Spaces after list markers
Tags: ol, ul, whitespace
Aliases: list-marker-space
Parameters: ulsingle, olsingle, ulmulti, olmulti (number, default 1)
This rule checks for the number of spaces between a list marker (e.g. '-',
'*', '+' or '1.') and the text of the list item.
The number of spaces checked for depends on the document style in use, but the default is 1 space after any list marker:
* Foo
* Bar
* Baz
1. Foo
1. Bar
1. Baz
1. Foo
* Bar
1. BazA document style may change the number of spaces after unordered list items and ordered list items independently, as well as based on whether the content of every item in the list consists of a single paragraph, or multiple paragraphs (including sub-lists and code blocks).
For example, the style guide at http://www.cirosantilli.com/markdown-styleguide/#spaces-after-marker specifies that 1 space after the list marker should be used if every item in the list fits within a single paragraph, but to use 2 or 3 spaces (for ordered and unordered lists respectively) if there are multiple paragraphs of content inside the list:
* Foo
* Bar
* Baz
vs.
* Foo
Second paragraph
* Bar
or
1. Foo
Second paragraph
1. BarTo fix this, ensure the correct number of spaces are used after list marker for your selected document style.
Line length Open
* The method can take 0, 1 or 2 numbers, and will return their sum (for an empty string it will return 0) for example ```""``` or ```"1"``` or ```"1,2"```- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks and/or tables parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Fenced code blocks should be surrounded by blank lines Open
```javascript- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more textTo fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more textRationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Line length Open
After the installation of node, running the following command while on the project root directory should get you started.- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks and/or tables parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
* `grunt jshint`: Static analysis of the project code with [jshint](https://github.com/jshint/jshint). In order to run this step you must do a ```npm install -g jshint``` first.- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks and/or tables parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Unordered list indentation Open
* The method can take 0, 1 or 2 numbers, and will return their sum (for an empty string it will return 0) for example ```""``` or ```"1"``` or ```"1,2"```- Read upRead up
- Exclude checks
MD007 - Unordered list indentation
Tags: bullet, ul, indentation
Aliases: ul-indent
Parameters: indent (number; default 2)
This rule is triggered when list items are not indented by the configured number of spaces (default: 2).
Example:
* List item
* Nested list item indented by 3 spacesCorrected Example:
* List item
* Nested list item indented by 2 spacesRationale (2 space indent): indenting by 2 spaces allows the content of a nested list to be in line with the start of the content of the parent list when a single space is used after the list marker.
Rationale (4 space indent): Same indent as code blocks, simpler for editors to implement. See http://www.cirosantilli.com/markdown-styleguide/#indented-lists for more information.
In addition, this is a compatibility issue with multi-markdown parsers, which require a 4 space indents. See http://support.markedapp.com/discussions/problems/21-sub-lists-not-indenting for a description of the problem.
Line length Open
* Allow multiple delimiters like this: ```"//[delim1][delim2]\n"``` for example ```"//[*][%]\n1*2%3"``` should return 6.- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks and/or tables parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
* Remember to solve things as simply as possible so that you force yourself to write tests you did not think about- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks and/or tables parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
* to change a delimiter, the beginning of the string will contain a separate line that looks like this: ```"//[delimiter]\n[numbers…]"``` for example ```"//;\n1;2"``` should return three where the default delimiter is ';' .- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks and/or tables parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Headers should be surrounded by blank lines Open
#### String Calculator Spec- Read upRead up
- Exclude checks
MD022 - Headers should be surrounded by blank lines
Tags: headers, blank_lines
Aliases: blanks-around-headers
This rule is triggered when headers (any style) are either not preceded or not followed by a blank line:
# Header 1
Some text
Some more text
## Header 2To fix this, ensure that all headers have a blank line both before and after (except where the header is at the beginning or end of the document):
# Header 1
Some text
Some more text
## Header 2Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse headers that don't have a blank line before, and will parse them as regular text.
Spaces after list markers Open
* the following input is ok: ```"1\n2,3"``` (will equal 6)- Read upRead up
- Exclude checks
MD030 - Spaces after list markers
Tags: ol, ul, whitespace
Aliases: list-marker-space
Parameters: ulsingle, olsingle, ulmulti, olmulti (number, default 1)
This rule checks for the number of spaces between a list marker (e.g. '-',
'*', '+' or '1.') and the text of the list item.
The number of spaces checked for depends on the document style in use, but the default is 1 space after any list marker:
* Foo
* Bar
* Baz
1. Foo
1. Bar
1. Baz
1. Foo
* Bar
1. BazA document style may change the number of spaces after unordered list items and ordered list items independently, as well as based on whether the content of every item in the list consists of a single paragraph, or multiple paragraphs (including sub-lists and code blocks).
For example, the style guide at http://www.cirosantilli.com/markdown-styleguide/#spaces-after-marker specifies that 1 space after the list marker should be used if every item in the list fits within a single paragraph, but to use 2 or 3 spaces (for ordered and unordered lists respectively) if there are multiple paragraphs of content inside the list:
* Foo
* Bar
* Baz
vs.
* Foo
Second paragraph
* Bar
or
1. Foo
Second paragraph
1. BarTo fix this, ensure the correct number of spaces are used after list marker for your selected document style.
Line length Open
* Start with the simplest test case of an empty string and move to 1 and two numbers- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks and/or tables parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Spaces after list markers Open
* Remember to solve things as simply as possible so that you force yourself to write tests you did not think about- Read upRead up
- Exclude checks
MD030 - Spaces after list markers
Tags: ol, ul, whitespace
Aliases: list-marker-space
Parameters: ulsingle, olsingle, ulmulti, olmulti (number, default 1)
This rule checks for the number of spaces between a list marker (e.g. '-',
'*', '+' or '1.') and the text of the list item.
The number of spaces checked for depends on the document style in use, but the default is 1 space after any list marker:
* Foo
* Bar
* Baz
1. Foo
1. Bar
1. Baz
1. Foo
* Bar
1. BazA document style may change the number of spaces after unordered list items and ordered list items independently, as well as based on whether the content of every item in the list consists of a single paragraph, or multiple paragraphs (including sub-lists and code blocks).
For example, the style guide at http://www.cirosantilli.com/markdown-styleguide/#spaces-after-marker specifies that 1 space after the list marker should be used if every item in the list fits within a single paragraph, but to use 2 or 3 spaces (for ordered and unordered lists respectively) if there are multiple paragraphs of content inside the list:
* Foo
* Bar
* Baz
vs.
* Foo
Second paragraph
* Bar
or
1. Foo
Second paragraph
1. BarTo fix this, ensure the correct number of spaces are used after list marker for your selected document style.
Line length Open
* Make sure you only test for correct inputs. there is no need to test for invalid inputs for this kata- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks and/or tables parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
* `grunt`: Run all of the above. When one of the tools returns an error, it will stop.- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks and/or tables parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Lists should be surrounded by blank lines Open
* `grunt jshint`: Static analysis of the project code with [jshint](https://github.com/jshint/jshint). In order to run this step you must do a ```npm install -g jshint``` first.- Read upRead up
- Exclude checks
MD032 - Lists should be surrounded by blank lines
Tags: bullet, ul, ol, blank_lines
Aliases: blanks-around-lists
This rule is triggered when lists (of any kind) are either not preceded or not followed by a blank line:
Some text
* Some
* List
1. Some
2. List
Some textTo fix this, ensure that all lists have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
* Some
* List
1. Some
2. List
Some textRationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse lists that don't have blank lines before and after them.
Note: List items without hanging indents are a violation of this rule; list items with hanging indents are okay:
* This is
not okay
* This is
okayLine length Open
Here you can find the slides of the presenation in different formats plus the implementation of the code kata.- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks and/or tables parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
* the following input is NOT ok: ```"1,\n"``` (not need to prove it - just clarifying)- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks and/or tables parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Spaces after list markers Open
* The method can take 0, 1 or 2 numbers, and will return their sum (for an empty string it will return 0) for example ```""``` or ```"1"``` or ```"1,2"```- Read upRead up
- Exclude checks
MD030 - Spaces after list markers
Tags: ol, ul, whitespace
Aliases: list-marker-space
Parameters: ulsingle, olsingle, ulmulti, olmulti (number, default 1)
This rule checks for the number of spaces between a list marker (e.g. '-',
'*', '+' or '1.') and the text of the list item.
The number of spaces checked for depends on the document style in use, but the default is 1 space after any list marker:
* Foo
* Bar
* Baz
1. Foo
1. Bar
1. Baz
1. Foo
* Bar
1. BazA document style may change the number of spaces after unordered list items and ordered list items independently, as well as based on whether the content of every item in the list consists of a single paragraph, or multiple paragraphs (including sub-lists and code blocks).
For example, the style guide at http://www.cirosantilli.com/markdown-styleguide/#spaces-after-marker specifies that 1 space after the list marker should be used if every item in the list fits within a single paragraph, but to use 2 or 3 spaces (for ordered and unordered lists respectively) if there are multiple paragraphs of content inside the list:
* Foo
* Bar
* Baz
vs.
* Foo
Second paragraph
* Bar
or
1. Foo
Second paragraph
1. BarTo fix this, ensure the correct number of spaces are used after list marker for your selected document style.