Showing 480 of 509 total issues
Similar blocks of code found in 3 locations. Consider refactoring. Open
if(self.objective):
top_k_vars=SelectKBest(f_regression, k=self.top_k)
top_k_vars.fit_transform(self.data[columns], self.data[self.target])
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 44.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
except:
top_k_vars=SelectKBest(f_classif, k=self.top_k)
top_k_vars.fit_transform(self.data[columns], self.data[self.target])
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 44.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
try:
top_k_vars=SelectKBest(chi2, k=self.top_k)
top_k_vars.fit_transform(self.data[columns], self.data[self.target])
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 44.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Line length Open
In the interest of fostering an open and welcoming environment, we as contributors and maintainers pledge to making participation in our project and our community a harassment-free experience for everyone, regardless of age, body size, disability, ethnicity, gender identity and expression, level of experience, nationality, personal appearance, race, religion, or sexual identity and orientation.
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
This Code of Conduct applies both within project spaces and in public spaces when an individual is representing the project or its community. Examples of representing a project or community include using an official project e-mail address, posting via an official social media account, or acting as an appointed representative at an online or offline event. Representation of a project may be further defined and clarified by project maintainers.
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Inconsistent indentation for list items at the same level Open
1. **Interactional Dominance** - This is the incremental R<sup>2</sup> contribution of the predictor to the complete model. Hence, the Interactional Dominance of a particular predictor 'X' will be the diffrence between the R<sup>2</sup> of the complete model and the R<sup>2</sup> of the model with all other predictors except the particular predictor 'X'. <br>
- Read upRead up
- Exclude checks
MD005 - Inconsistent indentation for list items at the same level
Tags: bullet, ul, indentation
Aliases: list-indent
This rule is triggered when list items are parsed as being at the same level, but don't have the same indentation:
* Item 1
* Nested Item 1
* Nested Item 2
* A misaligned item
Usually this rule will be triggered because of a typo. Correct the indentation for the list to fix it:
* Item 1
* Nested Item 1
* Nested Item 2
* Nested Item 3
Trailing spaces Open
<img src='images/formulas.JPG'>
- Read upRead up
- Exclude checks
MD009 - Trailing spaces
Tags: whitespace
Aliases: no-trailing-spaces
Parameters: br_spaces (number; default: 0)
This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.
The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.
Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.
Multiple consecutive blank lines Open
- Read upRead up
- Exclude checks
MD012 - Multiple consecutive blank lines
Tags: whitespace, blank_lines
Aliases: no-multiple-blanks
This rule is triggered when there are multiple consecutive blank lines in the document:
Some text here
Some more text here
To fix this, delete the offending lines:
Some text here
Some more text here
Note: this rule will not be triggered if there are multiple consecutive blank lines inside code blocks.
Line length Open
*This package is designed to determine relative importance of predictors for both regression and classification models. The determination of relative importance depends on how one defines importance; Budescu (1993) and Azen and Budescu (2003) proposed using dominance analysis (DA) because it invokes a general and intuitive definition of "relative importance" that is based on the additional contribution of a predictor in all subset models. The purpose of determining predictor importance in the context of DA is not model selection but rather uncovering the individual contributions of the predictors.*
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
Based on these criteria, the following four R<sup>2</sup> analogues were chosen that satisfied at least three of these four properties:
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
2. **Individual Dominance -** The individual dominance of a predictor is the R<sup>2</sup> of the model between the dependent variable and the predictor. So, the individual dominanace of predictor X<sub>1</sub> will be R<sup>2</sup><sub>Y.X<sub>1</sub></sub>. <br>
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
* **Conditional Dominance** - If a predictor’s averaged additional contribution within each model size is greater than that of another predictor, then the first predictor is said to conditionally dominate the latter. Here, the model size is indicated by the number of predictors included in a given model. If a predictor’s averaged additional contribution is greater for some model sizes but not for all, then conditional dominance between the two predictors cannot be established.
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
Regression - <a href="https://www.kaggle.com/iamsajanbhagat/dominance-analysis-on-boston-house-prices-dataset" target="_blank">Dominane Analysis on Boston House Price Data</a> &
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
Classification- <a href="https://www.kaggle.com/iamsajanbhagat/dominance-analysis-on-breast-cancer-dataset" target="_blank"> Dominance Analysis on Breast Cancer Dataset</a>*
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
[Dominance-Analysis](https://github.com/bhagatsajan0073/dominance_analysis) package on GitHub.
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Trailing spaces Open
## Important Parameters
- Read upRead up
- Exclude checks
MD009 - Trailing spaces
Tags: whitespace
Aliases: no-trailing-spaces
Parameters: br_spaces (number; default: 0)
This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.
The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.
Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.
Line length Open
<img src="https://latex.codecogs.com/svg.latex?\Large&space;R_{Estrella}^{2}=1-\{\frac{LL_{full}}{LL_{null}}\}^{\frac{-2}{N}*LL_{null}}" title="\Large R_{Estrella}^{2}=1-\}\frac{LL_{full}}{LL_{null}}\}^{\frac{2}{N}*LL_{null}}" />
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
Hence, individual dominance can be interpreted as the variability explained by the predictor alone or the quantum of impact that a predictor will have in absence of all other predictors.
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
A clear and concise description of what the problem is. Ex. I'm always frustrated when [...]
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
Project maintainers who do not follow or enforce the Code of Conduct in good faith may face temporary or permanent repercussions as determined by other members of the project's leadership.
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.