Sign upLogin

domjtalbot/nx-mesh

View on GitHub
Star

Showing 553 of 553 total issues

Identical blocks of code found in 2 locations. Consider refactoring.
Open

      childProcess?.stdout?.on('data', (chunk) => {
        if (options.debug) {
          process.stdout.write(chunk);
        }
      });
Severity: Minor
Found in packages/nx-mesh/src/executors/build/build.ts and 1 other location - About 40 mins to fix
packages/nx-mesh/src/executors/build-swc/build-swc.ts on lines 45..49

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    const input: GeneratorCallback[] = [
      () => log(1),
      () => asyncLog('hello'),
      () => asyncLog(3),
      () => log('world'),
Severity: Minor
Found in packages/nx-mesh/src/utils/run-tasks-in-serial/run-tasks-in-serial.spec.ts and 2 other locations - About 40 mins to fix
packages/nx-mesh/src/utils/run-tasks-in-serial/run-tasks-in-serial.spec.ts on lines 9..14
packages/nx-mesh/src/utils/run-tasks-in-serial/run-tasks-in-serial.spec.ts on lines 28..33

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    const input: GeneratorCallback[] = [
      () => log(1),
      () => log('hello'),
      () => log(3),
      () => log('world'),
Severity: Minor
Found in packages/nx-mesh/src/utils/run-tasks-in-serial/run-tasks-in-serial.spec.ts and 2 other locations - About 40 mins to fix
packages/nx-mesh/src/utils/run-tasks-in-serial/run-tasks-in-serial.spec.ts on lines 9..14
packages/nx-mesh/src/utils/run-tasks-in-serial/run-tasks-in-serial.spec.ts on lines 48..53

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    const input: GeneratorCallback[] = [
      () => log(1),
      () => log('hello'),
      () => log(3),
      () => log('world'),
Severity: Minor
Found in packages/nx-mesh/src/utils/run-tasks-in-serial/run-tasks-in-serial.spec.ts and 2 other locations - About 40 mins to fix
packages/nx-mesh/src/utils/run-tasks-in-serial/run-tasks-in-serial.spec.ts on lines 28..33
packages/nx-mesh/src/utils/run-tasks-in-serial/run-tasks-in-serial.spec.ts on lines 48..53

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

      childProcess?.stdout?.on('data', (chunk) => {
        if (options.debug) {
          process.stdout.write(chunk);
        }
      });
Severity: Minor
Found in packages/nx-mesh/src/executors/build-swc/build-swc.ts and 1 other location - About 40 mins to fix
packages/nx-mesh/src/executors/build/build.ts on lines 45..49

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    childProcess.on('exit', (code) => {
      if (code === 0) {
        resolve(code);
      } else {
        reject(code);
Severity: Minor
Found in packages/nx-mesh/src/utils/graphql-codegen-cli/cli.ts and 1 other location - About 35 mins to fix
packages/nx-mesh/src/utils/mesh-cli/cli.ts on lines 44..50

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 47.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    it('should remove require when provided with an empty array', () => {
      const result = getCliArguments({
        require: [],
      });
      expect(result).toStrictEqual({});
Severity: Minor
Found in packages/nx-mesh/src/utils/graphql-codegen-cli/arguments.spec.ts and 1 other location - About 35 mins to fix
packages/nx-mesh/src/utils/mesh-cli/arguments.spec.ts on lines 73..78

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 47.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    it('should remove require when provided with an empty array', () => {
      const result = getCliArguments({
        require: [],
      });
      expect(result).toStrictEqual({});
Severity: Minor
Found in packages/nx-mesh/src/utils/mesh-cli/arguments.spec.ts and 1 other location - About 35 mins to fix
packages/nx-mesh/src/utils/graphql-codegen-cli/arguments.spec.ts on lines 118..123

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 47.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  examples[options.example].dependencies.forEach((dep) => {
    exampleDeps = {
      ...exampleDeps,
      ...versions[dep],
    };
Severity: Minor
Found in packages/nx-mesh/src/generators/utils/create-mesh-example/add-dependencies.ts and 1 other location - About 35 mins to fix
packages/nx-mesh/src/generators/utils/create-mesh-example/add-dependencies.ts on lines 35..40

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 47.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    examples[options.example].codegenDependencies.forEach((dep) => {
      exampleDeps = {
        ...exampleDeps,
        ...versions[dep],
      };
Severity: Minor
Found in packages/nx-mesh/src/generators/utils/create-mesh-example/add-dependencies.ts and 1 other location - About 35 mins to fix
packages/nx-mesh/src/generators/utils/create-mesh-example/add-dependencies.ts on lines 22..27

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 47.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    childProcess.on('exit', (code) => {
      if (code === 0) {
        resolve(code);
      } else {
        reject(code);
Severity: Minor
Found in packages/nx-mesh/src/utils/mesh-cli/cli.ts and 1 other location - About 35 mins to fix
packages/nx-mesh/src/utils/graphql-codegen-cli/cli.ts on lines 38..44

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 47.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Function setDefaults has a Cognitive Complexity of 7 (exceeds 5 allowed). Consider refactoring.
Open

export function setDefaults(host: Tree, options: NormalizedOptions) {
  const workspace = readWorkspaceConfiguration(host);

  if (!workspace.defaultProject) {
    workspace.defaultProject = options.projectName;
Severity: Minor
Found in packages/nx-mesh/src/generators/base/lib/set-defaults.ts - About 35 mins to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Function normalizeOptions has a Cognitive Complexity of 7 (exceeds 5 allowed). Consider refactoring.
Open

export function normalizeOptions(
  options: SwcExecutorOptions,
  contextRoot: string,
  sourceRoot?: string,
  projectRoot?: string
Severity: Minor
Found in packages/nx-mesh/src/executors/build-swc/swc-executor/swc.impl.ts - About 35 mins to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Function runTasksInSerial has a Cognitive Complexity of 6 (exceeds 5 allowed). Consider refactoring.
Open

  (...tasks: GeneratorCallback[]): GeneratorCallback =>
  async () => {
    for (const task of tasks) {
      if (task instanceof Promise) {
        await task();
Severity: Minor
Found in packages/nx-mesh/src/utils/run-tasks-in-serial/run-tasks-in-serial.ts - About 25 mins to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Unexpected tabs found.
Open

Severity: Minor
Found in .github/banner-4.png by editorconfig

Unexpected tabs found.
Open

Severity: Minor
Found in .github/banner-4.png by editorconfig

Unexpected tabs found.
Open

Severity: Minor
Found in .github/banner-4.png by editorconfig

Unexpected tabs found.
Open

Severity: Minor
Found in .github/banner-4.png by editorconfig

Unexpected tabs found.
Open

Severity: Minor
Found in .github/banner-4.png by editorconfig

Unexpected tabs found.
Open

Severity: Minor
Found in .github/banner-4.png by editorconfig
Severity
Category
Status
Source
Language