MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD012 - Multiple consecutive blank lines

Tags: whitespace, blank_lines

Aliases: no-multiple-blanks

This rule is triggered when there are multiple consecutive blank lines in the document:

Some text here


Some more text here

To fix this, delete the offending lines:

Some text here

Some more text here

Note: this rule will not be triggered if there are multiple consecutive blank lines inside code blocks.

MD032 - Lists should be surrounded by blank lines

Tags: bullet, ul, ol, blank_lines

Aliases: blanks-around-lists

This rule is triggered when lists (of any kind) are either not preceded or not followed by a blank line:

Some text
* Some
* List

1. Some
2. List
Some text

To fix this, ensure that all lists have a blank line both before and after (except where the block is at the beginning or end of the document):

Some text

* Some
* List

1. Some
2. List

Some text

Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse lists that don't have blank lines before and after them.

Note: List items without hanging indents are a violation of this rule; list items with hanging indents are okay:

* This is
not okay

* This is
  okay

MD001 - Header levels should only increment by one level at a time

Tags: headers

Aliases: header-increment

This rule is triggered when you skip header levels in a markdown document, for example:

# Header 1

### Header 3

We skipped out a 2nd level header in this document

When using multiple header levels, nested headers should increase by only one level at a time:

# Header 1

## Header 2

### Header 3

#### Header 4

## Another Header 2

### Another Header 3

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD012 - Multiple consecutive blank lines

Tags: whitespace, blank_lines

Aliases: no-multiple-blanks

This rule is triggered when there are multiple consecutive blank lines in the document:

Some text here


Some more text here

To fix this, delete the offending lines:

Some text here

Some more text here

Note: this rule will not be triggered if there are multiple consecutive blank lines inside code blocks.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD022 - Headers should be surrounded by blank lines

Tags: headers, blank_lines

Aliases: blanks-around-headers

This rule is triggered when headers (any style) are either not preceded or not followed by a blank line:

# Header 1
Some text

Some more text
## Header 2

To fix this, ensure that all headers have a blank line both before and after (except where the header is at the beginning or end of the document):

# Header 1

Some text

Some more text

## Header 2

Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse headers that don't have a blank line before, and will parse them as regular text.

MD012 - Multiple consecutive blank lines

Tags: whitespace, blank_lines

Aliases: no-multiple-blanks

This rule is triggered when there are multiple consecutive blank lines in the document:

Some text here


Some more text here

To fix this, delete the offending lines:

Some text here

Some more text here

Note: this rule will not be triggered if there are multiple consecutive blank lines inside code blocks.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD012 - Multiple consecutive blank lines

Tags: whitespace, blank_lines

Aliases: no-multiple-blanks

This rule is triggered when there are multiple consecutive blank lines in the document:

Some text here


Some more text here

To fix this, delete the offending lines:

Some text here

Some more text here

Note: this rule will not be triggered if there are multiple consecutive blank lines inside code blocks.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD012 - Multiple consecutive blank lines

Tags: whitespace, blank_lines

Aliases: no-multiple-blanks

This rule is triggered when there are multiple consecutive blank lines in the document:

Some text here


Some more text here

To fix this, delete the offending lines:

Some text here

Some more text here

Note: this rule will not be triggered if there are multiple consecutive blank lines inside code blocks.

MD014 - Dollar signs used before commands without showing output

Tags: code

Aliases: commands-show-output

This rule is triggered when there are code blocks showing shell commands to be typed, and the shell commands are preceded by dollar signs ($):

$ ls
$ cat foo
$ less bar

The dollar signs are unnecessary in the above situation, and should not be included:

ls
cat foo
less bar

However, an exception is made when there is a need to distinguish between typed commands and command output, as in the following example:

$ ls
foo bar
$ cat foo
Hello world
$ cat bar
baz

Rationale: it is easier to copy and paste and less noisy if the dollar signs are omitted when they are not needed. See http://www.cirosantilli.com/markdown-styleguide/#dollar-signs-in-shell-code for more information.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD014 - Dollar signs used before commands without showing output

Tags: code

Aliases: commands-show-output

This rule is triggered when there are code blocks showing shell commands to be typed, and the shell commands are preceded by dollar signs ($):

$ ls
$ cat foo
$ less bar

The dollar signs are unnecessary in the above situation, and should not be included:

ls
cat foo
less bar

However, an exception is made when there is a need to distinguish between typed commands and command output, as in the following example:

$ ls
foo bar
$ cat foo
Hello world
$ cat bar
baz

Rationale: it is easier to copy and paste and less noisy if the dollar signs are omitted when they are not needed. See http://www.cirosantilli.com/markdown-styleguide/#dollar-signs-in-shell-code for more information.

MD026 - Trailing punctuation in header

Tags: headers

Aliases: no-trailing-punctuation

Parameters: punctuation (string; default ".,;:!?")

This rule is triggered on any header that has a punctuation character as the last character in the line:

# This is a header.

To fix this, remove any trailing punctuation:

# This is a header

Note: The punctuation parameter can be used to specify what characters class as punctuation at the end of the header. For example, you can set it to '.,;:!' to allow headers with question marks in them, such as might be used in an FAQ.

MD012 - Multiple consecutive blank lines

Tags: whitespace, blank_lines

Aliases: no-multiple-blanks

This rule is triggered when there are multiple consecutive blank lines in the document:

Some text here


Some more text here

To fix this, delete the offending lines:

Some text here

Some more text here

Note: this rule will not be triggered if there are multiple consecutive blank lines inside code blocks.

MD012 - Multiple consecutive blank lines

Tags: whitespace, blank_lines

Aliases: no-multiple-blanks

This rule is triggered when there are multiple consecutive blank lines in the document:

Some text here


Some more text here

To fix this, delete the offending lines:

Some text here

Some more text here

Note: this rule will not be triggered if there are multiple consecutive blank lines inside code blocks.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD026 - Trailing punctuation in header

Tags: headers

Aliases: no-trailing-punctuation

Parameters: punctuation (string; default ".,;:!?")

This rule is triggered on any header that has a punctuation character as the last character in the line:

# This is a header.

To fix this, remove any trailing punctuation:

# This is a header

Note: The punctuation parameter can be used to specify what characters class as punctuation at the end of the header. For example, you can set it to '.,;:!' to allow headers with question marks in them, such as might be used in an FAQ.

MD036 - Emphasis used instead of a header

Tags: headers, emphasis

Parameters: punctuation (string; default ".,;:!?")

Aliases: no-emphasis-as-header

This check looks for instances where emphasized (i.e. bold or italic) text is used to separate sections, where a header should be used instead:

**My document**

Lorem ipsum dolor sit amet...

_Another section_

Consectetur adipiscing elit, sed do eiusmod.

To fix this, use markdown headers instead of emphasized text to denote sections:

# My document

Lorem ipsum dolor sit amet...

## Another section

Consectetur adipiscing elit, sed do eiusmod.

Note: this rule looks for single line paragraphs that consist entirely of emphasized text. It won't fire on emphasis used within regular text, multi-line emphasized paragraphs, and paragraphs ending in punctuation. Similarly to rule MD026, you can configure what characters are recognized as punctuation.