This warning comes up if a model does not limit what attributes can be set through mass assignment.

In particular, this check looks for attr_accessible inside model definitions. If it is not found, this warning will be issued.

Brakeman also warns on use of attr_protected - especially since it was found to be vulnerable to bypass. Warnings for mass assignment on models using attr_protected will be reported, but at a lower confidence level.

Note that disabling mass assignment globally will suppress these warnings.

This cop checks that the ABC size of methods is not higher than the configured maximum. The ABC size is based on assignments, branches (method calls), and conditions. See http://c2.com/cgi/wiki?AbcMetric

This cop checks that the ABC size of methods is not higher than the configured maximum. The ABC size is based on assignments, branches (method calls), and conditions. See http://c2.com/cgi/wiki?AbcMetric

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

• Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
• Code is considered more complex for each "break in the linear flow of the code"
• Code is considered more complex when "flow breaking structures are nested"

Further reading

• Cognitive Complexity docs
• Cognitive Complexity: A new way of measuring understandability

This cop looks for has(one|many) and belongsto associations where ActiveRecord can't automatically determine the inverse association because of a scope or the options used. This can result in unnecessary queries in some circumstances. :inverse_of must be manually specified for associations to work in both ways, or set to false to opt-out.

Example:

# good
class Blog < ApplicationRecord
  has_many :posts
end

class Post < ApplicationRecord
  belongs_to :blog
end

Example:

# bad
class Blog < ApplicationRecord
  has_many :posts, -> { order(published_at: :desc) }
end

class Post < ApplicationRecord
  belongs_to :blog
end

# good
class Blog < ApplicationRecord
  has_many(:posts,
    -> { order(published_at: :desc) },
    inverse_of: :blog
  )
end

class Post < ApplicationRecord
  belongs_to :blog
end

# good
class Blog < ApplicationRecord
  with_options inverse_of: :blog do
    has_many :posts, -> { order(published_at: :desc) }
  end
end

class Post < ApplicationRecord
  belongs_to :blog
end

Example:

# bad
class Picture < ApplicationRecord
  belongs_to :imageable, polymorphic: true
end

class Employee < ApplicationRecord
  has_many :pictures, as: :imageable
end

class Product < ApplicationRecord
  has_many :pictures, as: :imageable
end

# good
class Picture < ApplicationRecord
  belongs_to :imageable, polymorphic: true
end

class Employee < ApplicationRecord
  has_many :pictures, as: :imageable, inverse_of: :imageable
end

class Product < ApplicationRecord
  has_many :pictures, as: :imageable, inverse_of: :imageable
end

Example:

# bad
# However, RuboCop can not detect this pattern...
class Physician < ApplicationRecord
  has_many :appointments
  has_many :patients, through: :appointments
end

class Appointment < ApplicationRecord
  belongs_to :physician
  belongs_to :patient
end

class Patient < ApplicationRecord
  has_many :appointments
  has_many :physicians, through: :appointments
end

# good
class Physician < ApplicationRecord
  has_many :appointments
  has_many :patients, through: :appointments
end

class Appointment < ApplicationRecord
  belongs_to :physician, inverse_of: :appointments
  belongs_to :patient, inverse_of: :appointments
end

class Patient < ApplicationRecord
  has_many :appointments
  has_many :physicians, through: :appointments
end

@see http://guides.rubyonrails.org/association_basics.html#bi-directional-associations @see http://api.rubyonrails.org/classes/ActiveRecord/Associations/ClassMethods.html#module-ActiveRecord::Associations::ClassMethods-label-Setting+Inverses

This cop is used to identify usages of where.first and change them to use find_by instead.

Example:

# bad
User.where(name: 'Bruce').first
User.where(name: 'Bruce').take

# good
User.find_by(name: 'Bruce')

This cop looks for has(one|many) and belongsto associations where ActiveRecord can't automatically determine the inverse association because of a scope or the options used. This can result in unnecessary queries in some circumstances. :inverse_of must be manually specified for associations to work in both ways, or set to false to opt-out.

Example:

# good
class Blog < ApplicationRecord
  has_many :posts
end

class Post < ApplicationRecord
  belongs_to :blog
end

Example:

# bad
class Blog < ApplicationRecord
  has_many :posts, -> { order(published_at: :desc) }
end

class Post < ApplicationRecord
  belongs_to :blog
end

# good
class Blog < ApplicationRecord
  has_many(:posts,
    -> { order(published_at: :desc) },
    inverse_of: :blog
  )
end

class Post < ApplicationRecord
  belongs_to :blog
end

# good
class Blog < ApplicationRecord
  with_options inverse_of: :blog do
    has_many :posts, -> { order(published_at: :desc) }
  end
end

class Post < ApplicationRecord
  belongs_to :blog
end

Example:

# bad
class Picture < ApplicationRecord
  belongs_to :imageable, polymorphic: true
end

class Employee < ApplicationRecord
  has_many :pictures, as: :imageable
end

class Product < ApplicationRecord
  has_many :pictures, as: :imageable
end

# good
class Picture < ApplicationRecord
  belongs_to :imageable, polymorphic: true
end

class Employee < ApplicationRecord
  has_many :pictures, as: :imageable, inverse_of: :imageable
end

class Product < ApplicationRecord
  has_many :pictures, as: :imageable, inverse_of: :imageable
end

Example:

# bad
# However, RuboCop can not detect this pattern...
class Physician < ApplicationRecord
  has_many :appointments
  has_many :patients, through: :appointments
end

class Appointment < ApplicationRecord
  belongs_to :physician
  belongs_to :patient
end

class Patient < ApplicationRecord
  has_many :appointments
  has_many :physicians, through: :appointments
end

# good
class Physician < ApplicationRecord
  has_many :appointments
  has_many :patients, through: :appointments
end

class Appointment < ApplicationRecord
  belongs_to :physician, inverse_of: :appointments
  belongs_to :patient, inverse_of: :appointments
end

class Patient < ApplicationRecord
  has_many :appointments
  has_many :physicians, through: :appointments
end

@see http://guides.rubyonrails.org/association_basics.html#bi-directional-associations @see http://api.rubyonrails.org/classes/ActiveRecord/Associations/ClassMethods.html#module-ActiveRecord::Associations::ClassMethods-label-Setting+Inverses

This cop looks for has(one|many) and belongsto associations where ActiveRecord can't automatically determine the inverse association because of a scope or the options used. This can result in unnecessary queries in some circumstances. :inverse_of must be manually specified for associations to work in both ways, or set to false to opt-out.

Example:

# good
class Blog < ApplicationRecord
  has_many :posts
end

class Post < ApplicationRecord
  belongs_to :blog
end

Example:

# bad
class Blog < ApplicationRecord
  has_many :posts, -> { order(published_at: :desc) }
end

class Post < ApplicationRecord
  belongs_to :blog
end

# good
class Blog < ApplicationRecord
  has_many(:posts,
    -> { order(published_at: :desc) },
    inverse_of: :blog
  )
end

class Post < ApplicationRecord
  belongs_to :blog
end

# good
class Blog < ApplicationRecord
  with_options inverse_of: :blog do
    has_many :posts, -> { order(published_at: :desc) }
  end
end

class Post < ApplicationRecord
  belongs_to :blog
end

Example:

# bad
class Picture < ApplicationRecord
  belongs_to :imageable, polymorphic: true
end

class Employee < ApplicationRecord
  has_many :pictures, as: :imageable
end

class Product < ApplicationRecord
  has_many :pictures, as: :imageable
end

# good
class Picture < ApplicationRecord
  belongs_to :imageable, polymorphic: true
end

class Employee < ApplicationRecord
  has_many :pictures, as: :imageable, inverse_of: :imageable
end

class Product < ApplicationRecord
  has_many :pictures, as: :imageable, inverse_of: :imageable
end

Example:

# bad
# However, RuboCop can not detect this pattern...
class Physician < ApplicationRecord
  has_many :appointments
  has_many :patients, through: :appointments
end

class Appointment < ApplicationRecord
  belongs_to :physician
  belongs_to :patient
end

class Patient < ApplicationRecord
  has_many :appointments
  has_many :physicians, through: :appointments
end

# good
class Physician < ApplicationRecord
  has_many :appointments
  has_many :patients, through: :appointments
end

class Appointment < ApplicationRecord
  belongs_to :physician, inverse_of: :appointments
  belongs_to :patient, inverse_of: :appointments
end

class Patient < ApplicationRecord
  has_many :appointments
  has_many :physicians, through: :appointments
end

@see http://guides.rubyonrails.org/association_basics.html#bi-directional-associations @see http://api.rubyonrails.org/classes/ActiveRecord/Associations/ClassMethods.html#module-ActiveRecord::Associations::ClassMethods-label-Setting+Inverses

This cop looks for has(one|many) and belongsto associations where ActiveRecord can't automatically determine the inverse association because of a scope or the options used. This can result in unnecessary queries in some circumstances. :inverse_of must be manually specified for associations to work in both ways, or set to false to opt-out.

Example:

# good
class Blog < ApplicationRecord
  has_many :posts
end

class Post < ApplicationRecord
  belongs_to :blog
end

Example:

# bad
class Blog < ApplicationRecord
  has_many :posts, -> { order(published_at: :desc) }
end

class Post < ApplicationRecord
  belongs_to :blog
end

# good
class Blog < ApplicationRecord
  has_many(:posts,
    -> { order(published_at: :desc) },
    inverse_of: :blog
  )
end

class Post < ApplicationRecord
  belongs_to :blog
end

# good
class Blog < ApplicationRecord
  with_options inverse_of: :blog do
    has_many :posts, -> { order(published_at: :desc) }
  end
end

class Post < ApplicationRecord
  belongs_to :blog
end

Example:

# bad
class Picture < ApplicationRecord
  belongs_to :imageable, polymorphic: true
end

class Employee < ApplicationRecord
  has_many :pictures, as: :imageable
end

class Product < ApplicationRecord
  has_many :pictures, as: :imageable
end

# good
class Picture < ApplicationRecord
  belongs_to :imageable, polymorphic: true
end

class Employee < ApplicationRecord
  has_many :pictures, as: :imageable, inverse_of: :imageable
end

class Product < ApplicationRecord
  has_many :pictures, as: :imageable, inverse_of: :imageable
end

Example:

# bad
# However, RuboCop can not detect this pattern...
class Physician < ApplicationRecord
  has_many :appointments
  has_many :patients, through: :appointments
end

class Appointment < ApplicationRecord
  belongs_to :physician
  belongs_to :patient
end

class Patient < ApplicationRecord
  has_many :appointments
  has_many :physicians, through: :appointments
end

# good
class Physician < ApplicationRecord
  has_many :appointments
  has_many :patients, through: :appointments
end

class Appointment < ApplicationRecord
  belongs_to :physician, inverse_of: :appointments
  belongs_to :patient, inverse_of: :appointments
end

class Patient < ApplicationRecord
  has_many :appointments
  has_many :physicians, through: :appointments
end

@see http://guides.rubyonrails.org/association_basics.html#bi-directional-associations @see http://api.rubyonrails.org/classes/ActiveRecord/Associations/ClassMethods.html#module-ActiveRecord::Associations::ClassMethods-label-Setting+Inverses

This cop looks for has(one|many) and belongsto associations where ActiveRecord can't automatically determine the inverse association because of a scope or the options used. This can result in unnecessary queries in some circumstances. :inverse_of must be manually specified for associations to work in both ways, or set to false to opt-out.

Example:

# good
class Blog < ApplicationRecord
  has_many :posts
end

class Post < ApplicationRecord
  belongs_to :blog
end

Example:

# bad
class Blog < ApplicationRecord
  has_many :posts, -> { order(published_at: :desc) }
end

class Post < ApplicationRecord
  belongs_to :blog
end

# good
class Blog < ApplicationRecord
  has_many(:posts,
    -> { order(published_at: :desc) },
    inverse_of: :blog
  )
end

class Post < ApplicationRecord
  belongs_to :blog
end

# good
class Blog < ApplicationRecord
  with_options inverse_of: :blog do
    has_many :posts, -> { order(published_at: :desc) }
  end
end

class Post < ApplicationRecord
  belongs_to :blog
end

Example:

# bad
class Picture < ApplicationRecord
  belongs_to :imageable, polymorphic: true
end

class Employee < ApplicationRecord
  has_many :pictures, as: :imageable
end

class Product < ApplicationRecord
  has_many :pictures, as: :imageable
end

# good
class Picture < ApplicationRecord
  belongs_to :imageable, polymorphic: true
end

class Employee < ApplicationRecord
  has_many :pictures, as: :imageable, inverse_of: :imageable
end

class Product < ApplicationRecord
  has_many :pictures, as: :imageable, inverse_of: :imageable
end

Example:

# bad
# However, RuboCop can not detect this pattern...
class Physician < ApplicationRecord
  has_many :appointments
  has_many :patients, through: :appointments
end

class Appointment < ApplicationRecord
  belongs_to :physician
  belongs_to :patient
end

class Patient < ApplicationRecord
  has_many :appointments
  has_many :physicians, through: :appointments
end

# good
class Physician < ApplicationRecord
  has_many :appointments
  has_many :patients, through: :appointments
end

class Appointment < ApplicationRecord
  belongs_to :physician, inverse_of: :appointments
  belongs_to :patient, inverse_of: :appointments
end

class Patient < ApplicationRecord
  has_many :appointments
  has_many :physicians, through: :appointments
end

@see http://guides.rubyonrails.org/association_basics.html#bi-directional-associations @see http://api.rubyonrails.org/classes/ActiveRecord/Associations/ClassMethods.html#module-ActiveRecord::Associations::ClassMethods-label-Setting+Inverses

This cop makes sure that accessor methods are named properly.

Example:

# bad
def set_attribute(value)
end

# good
def attribute=(value)
end

# bad
def get_attribute
end

# good
def attribute
end

Use a guard clause instead of wrapping the code inside a conditional expression

Example:

# bad
def test
  if something
    work
  end
end

# good
def test
  return unless something
  work
end

# also good
def test
  work if something
end

# bad
if something
  raise 'exception'
else
  ok
end

# good
raise 'exception' if something
ok

This cop makes sure that accessor methods are named properly.

Example:

# bad
def set_attribute(value)
end

# good
def attribute=(value)
end

# bad
def get_attribute
end

# good
def attribute
end

Use a guard clause instead of wrapping the code inside a conditional expression

Example:

# bad
def test
  if something
    work
  end
end

# good
def test
  return unless something
  work
end

# also good
def test
  work if something
end

# bad
if something
  raise 'exception'
else
  ok
end

# good
raise 'exception' if something
ok