Mass assignment is not restricted using attr_accessible Open
class ReviewResponseMap < ResponseMap
- Read upRead up
- Exclude checks
This warning comes up if a model does not limit what attributes can be set through mass assignment.
In particular, this check looks for attr_accessible
inside model definitions. If it is not found, this warning will be issued.
Brakeman also warns on use of attr_protected
- especially since it was found to be vulnerable to bypass. Warnings for mass assignment on models using attr_protected
will be reported, but at a lower confidence level.
Note that disabling mass assignment globally will suppress these warnings.
Assignment Branch Condition size for import is too high. [35.94/15] Open
def self.import(row_hash, _session, assignment_id)
reviewee_user_name = row_hash[:reviewee].to_s
reviewee_user = User.find_by(name: reviewee_user_name)
raise ArgumentError, "Cannot find reviewee user." unless reviewee_user
reviewee_participant = AssignmentParticipant.find_by(user_id: reviewee_user.id, parent_id: assignment_id)
- Read upRead up
- Exclude checks
This cop checks that the ABC size of methods is not higher than the configured maximum. The ABC size is based on assignments, branches (method calls), and conditions. See http://c2.com/cgi/wiki?AbcMetric
Assignment Branch Condition size for get_responses_for_team_round is too high. [29.5/15] Open
def self.get_responses_for_team_round(team, round)
responses = []
if team.id
maps = ResponseMap.where(reviewee_id: team.id, type: "ReviewResponseMap")
maps.each do |map|
- Read upRead up
- Exclude checks
This cop checks that the ABC size of methods is not higher than the configured maximum. The ABC size is based on assignments, branches (method calls), and conditions. See http://c2.com/cgi/wiki?AbcMetric
Assignment Branch Condition size for prepare_review_response is too high. [17.26/15] Open
def self.prepare_review_response(assignment, maps, review_final_versions, round)
symbol = if round.nil?
:review
else
("review round" + round.to_s).to_sym
- Read upRead up
- Exclude checks
This cop checks that the ABC size of methods is not higher than the configured maximum. The ABC size is based on assignments, branches (method calls), and conditions. See http://c2.com/cgi/wiki?AbcMetric
Cyclomatic complexity for import is too high. [7/6] Open
def self.import(row_hash, _session, assignment_id)
reviewee_user_name = row_hash[:reviewee].to_s
reviewee_user = User.find_by(name: reviewee_user_name)
raise ArgumentError, "Cannot find reviewee user." unless reviewee_user
reviewee_participant = AssignmentParticipant.find_by(user_id: reviewee_user.id, parent_id: assignment_id)
- Read upRead up
- Exclude checks
This cop checks that the cyclomatic complexity of methods is not higher than the configured maximum. The cyclomatic complexity is the number of linearly independent paths through a method. The algorithm counts decision points and adds one.
An if statement (or unless or ?:) increases the complexity by one. An else branch does not, since it doesn't add a decision point. The && operator (or keyword and) can be converted to a nested if statement, and ||/or is shorthand for a sequence of ifs, so they also add one. Loops can be said to have an exit condition, so they add one.
Assignment Branch Condition size for email is too high. [16.49/15] Open
def email(defn, _participant, assignment)
defn[:body][:type] = "Peer Review"
AssignmentTeam.find(reviewee_id).users.each do |user|
defn[:body][:obj_name] = assignment.name
defn[:body][:first_name] = User.find(user.id).fullname
- Read upRead up
- Exclude checks
This cop checks that the ABC size of methods is not higher than the configured maximum. The ABC size is based on assignments, branches (method calls), and conditions. See http://c2.com/cgi/wiki?AbcMetric
Method import
has a Cognitive Complexity of 14 (exceeds 5 allowed). Consider refactoring. Open
def self.import(row_hash, _session, assignment_id)
reviewee_user_name = row_hash[:reviewee].to_s
reviewee_user = User.find_by(name: reviewee_user_name)
raise ArgumentError, "Cannot find reviewee user." unless reviewee_user
reviewee_participant = AssignmentParticipant.find_by(user_id: reviewee_user.id, parent_id: assignment_id)
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Assignment Branch Condition size for review_response_report is too high. [15.84/15] Open
def self.review_response_report(id, assignment, type, review_user)
if review_user.nil?
# This is not a search, so find all reviewers for this assignment
response_maps_with_distinct_participant_id =
ResponseMap.select("DISTINCT reviewer_id").where('reviewed_object_id = ? and type = ? and calibrate_to = ?', id, type, 0)
- Read upRead up
- Exclude checks
This cop checks that the ABC size of methods is not higher than the configured maximum. The ABC size is based on assignments, branches (method calls), and conditions. See http://c2.com/cgi/wiki?AbcMetric
Method prepare_review_response
has a Cognitive Complexity of 8 (exceeds 5 allowed). Consider refactoring. Open
def self.prepare_review_response(assignment, maps, review_final_versions, round)
symbol = if round.nil?
:review
else
("review round" + round.to_s).to_sym
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Method get_responses_for_team_round
has a Cognitive Complexity of 6 (exceeds 5 allowed). Consider refactoring. Open
def self.get_responses_for_team_round(team, round)
responses = []
if team.id
maps = ResponseMap.where(reviewee_id: team.id, type: "ReviewResponseMap")
maps.each do |map|
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Specify an :inverse_of
option. Open
belongs_to :reviewee, class_name: 'Team', foreign_key: 'reviewee_id'
- Read upRead up
- Exclude checks
This cop looks for has(one|many) and belongsto associations where
ActiveRecord can't automatically determine the inverse association
because of a scope or the options used. This can result in unnecessary
queries in some circumstances. :inverse_of
must be manually specified
for associations to work in both ways, or set to false
to opt-out.
Example:
# good
class Blog < ApplicationRecord
has_many :posts
end
class Post < ApplicationRecord
belongs_to :blog
end
Example:
# bad
class Blog < ApplicationRecord
has_many :posts, -> { order(published_at: :desc) }
end
class Post < ApplicationRecord
belongs_to :blog
end
# good
class Blog < ApplicationRecord
has_many(:posts,
-> { order(published_at: :desc) },
inverse_of: :blog
)
end
class Post < ApplicationRecord
belongs_to :blog
end
# good
class Blog < ApplicationRecord
with_options inverse_of: :blog do
has_many :posts, -> { order(published_at: :desc) }
end
end
class Post < ApplicationRecord
belongs_to :blog
end
Example:
# bad
class Picture < ApplicationRecord
belongs_to :imageable, polymorphic: true
end
class Employee < ApplicationRecord
has_many :pictures, as: :imageable
end
class Product < ApplicationRecord
has_many :pictures, as: :imageable
end
# good
class Picture < ApplicationRecord
belongs_to :imageable, polymorphic: true
end
class Employee < ApplicationRecord
has_many :pictures, as: :imageable, inverse_of: :imageable
end
class Product < ApplicationRecord
has_many :pictures, as: :imageable, inverse_of: :imageable
end
Example:
# bad
# However, RuboCop can not detect this pattern...
class Physician < ApplicationRecord
has_many :appointments
has_many :patients, through: :appointments
end
class Appointment < ApplicationRecord
belongs_to :physician
belongs_to :patient
end
class Patient < ApplicationRecord
has_many :appointments
has_many :physicians, through: :appointments
end
# good
class Physician < ApplicationRecord
has_many :appointments
has_many :patients, through: :appointments
end
class Appointment < ApplicationRecord
belongs_to :physician, inverse_of: :appointments
belongs_to :patient, inverse_of: :appointments
end
class Patient < ApplicationRecord
has_many :appointments
has_many :physicians, through: :appointments
end
@see http://guides.rubyonrails.org/association_basics.html#bi-directional-associations @see http://api.rubyonrails.org/classes/ActiveRecord/Associations/ClassMethods.html#module-ActiveRecord::Associations::ClassMethods-label-Setting+Inverses
Specify an :inverse_of
option. Open
belongs_to :contributor, class_name: 'Team', foreign_key: 'reviewee_id'
- Read upRead up
- Exclude checks
This cop looks for has(one|many) and belongsto associations where
ActiveRecord can't automatically determine the inverse association
because of a scope or the options used. This can result in unnecessary
queries in some circumstances. :inverse_of
must be manually specified
for associations to work in both ways, or set to false
to opt-out.
Example:
# good
class Blog < ApplicationRecord
has_many :posts
end
class Post < ApplicationRecord
belongs_to :blog
end
Example:
# bad
class Blog < ApplicationRecord
has_many :posts, -> { order(published_at: :desc) }
end
class Post < ApplicationRecord
belongs_to :blog
end
# good
class Blog < ApplicationRecord
has_many(:posts,
-> { order(published_at: :desc) },
inverse_of: :blog
)
end
class Post < ApplicationRecord
belongs_to :blog
end
# good
class Blog < ApplicationRecord
with_options inverse_of: :blog do
has_many :posts, -> { order(published_at: :desc) }
end
end
class Post < ApplicationRecord
belongs_to :blog
end
Example:
# bad
class Picture < ApplicationRecord
belongs_to :imageable, polymorphic: true
end
class Employee < ApplicationRecord
has_many :pictures, as: :imageable
end
class Product < ApplicationRecord
has_many :pictures, as: :imageable
end
# good
class Picture < ApplicationRecord
belongs_to :imageable, polymorphic: true
end
class Employee < ApplicationRecord
has_many :pictures, as: :imageable, inverse_of: :imageable
end
class Product < ApplicationRecord
has_many :pictures, as: :imageable, inverse_of: :imageable
end
Example:
# bad
# However, RuboCop can not detect this pattern...
class Physician < ApplicationRecord
has_many :appointments
has_many :patients, through: :appointments
end
class Appointment < ApplicationRecord
belongs_to :physician
belongs_to :patient
end
class Patient < ApplicationRecord
has_many :appointments
has_many :physicians, through: :appointments
end
# good
class Physician < ApplicationRecord
has_many :appointments
has_many :patients, through: :appointments
end
class Appointment < ApplicationRecord
belongs_to :physician, inverse_of: :appointments
belongs_to :patient, inverse_of: :appointments
end
class Patient < ApplicationRecord
has_many :appointments
has_many :physicians, through: :appointments
end
@see http://guides.rubyonrails.org/association_basics.html#bi-directional-associations @see http://api.rubyonrails.org/classes/ActiveRecord/Associations/ClassMethods.html#module-ActiveRecord::Associations::ClassMethods-label-Setting+Inverses
Specify an :inverse_of
option. Open
belongs_to :assignment, class_name: 'Assignment', foreign_key: 'reviewed_object_id'
- Read upRead up
- Exclude checks
This cop looks for has(one|many) and belongsto associations where
ActiveRecord can't automatically determine the inverse association
because of a scope or the options used. This can result in unnecessary
queries in some circumstances. :inverse_of
must be manually specified
for associations to work in both ways, or set to false
to opt-out.
Example:
# good
class Blog < ApplicationRecord
has_many :posts
end
class Post < ApplicationRecord
belongs_to :blog
end
Example:
# bad
class Blog < ApplicationRecord
has_many :posts, -> { order(published_at: :desc) }
end
class Post < ApplicationRecord
belongs_to :blog
end
# good
class Blog < ApplicationRecord
has_many(:posts,
-> { order(published_at: :desc) },
inverse_of: :blog
)
end
class Post < ApplicationRecord
belongs_to :blog
end
# good
class Blog < ApplicationRecord
with_options inverse_of: :blog do
has_many :posts, -> { order(published_at: :desc) }
end
end
class Post < ApplicationRecord
belongs_to :blog
end
Example:
# bad
class Picture < ApplicationRecord
belongs_to :imageable, polymorphic: true
end
class Employee < ApplicationRecord
has_many :pictures, as: :imageable
end
class Product < ApplicationRecord
has_many :pictures, as: :imageable
end
# good
class Picture < ApplicationRecord
belongs_to :imageable, polymorphic: true
end
class Employee < ApplicationRecord
has_many :pictures, as: :imageable, inverse_of: :imageable
end
class Product < ApplicationRecord
has_many :pictures, as: :imageable, inverse_of: :imageable
end
Example:
# bad
# However, RuboCop can not detect this pattern...
class Physician < ApplicationRecord
has_many :appointments
has_many :patients, through: :appointments
end
class Appointment < ApplicationRecord
belongs_to :physician
belongs_to :patient
end
class Patient < ApplicationRecord
has_many :appointments
has_many :physicians, through: :appointments
end
# good
class Physician < ApplicationRecord
has_many :appointments
has_many :patients, through: :appointments
end
class Appointment < ApplicationRecord
belongs_to :physician, inverse_of: :appointments
belongs_to :patient, inverse_of: :appointments
end
class Patient < ApplicationRecord
has_many :appointments
has_many :physicians, through: :appointments
end
@see http://guides.rubyonrails.org/association_basics.html#bi-directional-associations @see http://api.rubyonrails.org/classes/ActiveRecord/Associations/ClassMethods.html#module-ActiveRecord::Associations::ClassMethods-label-Setting+Inverses
Do not prefix reader method names with get_
. Open
def get_title
- Read upRead up
- Exclude checks
This cop makes sure that accessor methods are named properly.
Example:
# bad
def set_attribute(value)
end
# good
def attribute=(value)
end
# bad
def get_attribute
end
# good
def attribute
end