Sign upLogin

eltos/SimpleDialogFragments

View on GitHub
Star

Showing 23 of 23 total issues

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    @Override
    protected boolean validate(Context context) {
        boolean valid = posButtonEnabled(context);
        if (valid) {
            TypedValue value = new TypedValue();
Severity: Major
Found in simpledialogfragments/src/main/java/eltos/simpledialogfragment/form/ColorViewHolder.java and 1 other location - About 1 hr to fix
simpledialogfragments/src/main/java/eltos/simpledialogfragment/form/SpinnerViewHolder.java on lines 130..145

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 96.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    @Override
    protected boolean validate(Context context) {
        boolean valid = posButtonEnabled(context);
        if (valid) {
            TypedValue value = new TypedValue();
Severity: Major
Found in simpledialogfragments/src/main/java/eltos/simpledialogfragment/form/SpinnerViewHolder.java and 1 other location - About 1 hr to fix
simpledialogfragments/src/main/java/eltos/simpledialogfragment/form/ColorViewHolder.java on lines 133..148

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 96.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    protected @Nullable String onValidateInput(@Nullable String input){
        Bundle extras = getExtras();
        if (getTargetFragment() instanceof InputValidator) {
            return ((InputValidator) getTargetFragment())
                    .validate(getTag(), input, extras);
Severity: Minor
Found in simpledialogfragments/src/main/java/eltos/simpledialogfragment/input/SimpleInputDialog.java and 1 other location - About 50 mins to fix
simpledialogfragments/src/main/java/eltos/simpledialogfragment/input/SimplePinDialog.java on lines 108..119

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 61.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        } else {
            Bundle extras = getExtras();
            if (getTargetFragment() instanceof SimpleInputDialog.InputValidator) {
                return ((SimpleInputDialog.InputValidator) getTargetFragment())
                        .validate(getTag(), input, extras);
Severity: Minor
Found in simpledialogfragments/src/main/java/eltos/simpledialogfragment/input/SimplePinDialog.java and 1 other location - About 50 mins to fix
simpledialogfragments/src/main/java/eltos/simpledialogfragment/input/SimpleInputDialog.java on lines 173..184

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 61.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    @Override
    protected boolean acceptsPositiveButtonPress() {
        String input = getText();
        String error = onValidateInput(input);
        if (error == null) {
Severity: Minor
Found in simpledialogfragments/src/main/java/eltos/simpledialogfragment/input/SimplePinDialog.java and 1 other location - About 45 mins to fix
simpledialogfragments/src/main/java/eltos/simpledialogfragment/input/SimpleInputDialog.java on lines 281..292

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 57.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    @Override
    protected boolean acceptsPositiveButtonPress() {
        String input = getText();
        String error = onValidateInput(input);
        if (error == null) {
Severity: Minor
Found in simpledialogfragments/src/main/java/eltos/simpledialogfragment/input/SimpleInputDialog.java and 1 other location - About 45 mins to fix
simpledialogfragments/src/main/java/eltos/simpledialogfragment/input/SimplePinDialog.java on lines 199..210

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 57.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            float s = ((p.y-C.y)*(B.x-C.x) - (p.x-C.x)*(B.y-C.y))
Severity: Minor
Found in simpledialogfragments/src/main/java/eltos/simpledialogfragment/color/ColorWheelView.java and 1 other location - About 45 mins to fix
simpledialogfragments/src/main/java/eltos/simpledialogfragment/color/ColorWheelView.java on lines 783..783

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 56.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

                    / ((p.y-C.y)*(B.x-A.x) - (p.x-C.x)*(B.y-A.y));
Severity: Minor
Found in simpledialogfragments/src/main/java/eltos/simpledialogfragment/color/ColorWheelView.java and 1 other location - About 45 mins to fix
simpledialogfragments/src/main/java/eltos/simpledialogfragment/color/ColorWheelView.java on lines 782..782

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 56.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            if (existing != null){
                FragmentManager otherManager = existing.getFragmentManager();
                if (otherManager != null) {
                    FragmentTransaction ft = otherManager.beginTransaction();
                    ft.remove(existing);
Severity: Minor
Found in simpledialogfragments/src/main/java/eltos/simpledialogfragment/SimpleDialog.java and 1 other location - About 45 mins to fix
simpledialogfragments/src/main/java/eltos/simpledialogfragment/SimpleDialog.java on lines 469..476

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 54.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        if (existing != null) {
            FragmentManager otherManager = existing.getFragmentManager();
            if (otherManager != null) {
                FragmentTransaction ft = otherManager.beginTransaction();
                ft.remove(existing);
Severity: Minor
Found in simpledialogfragments/src/main/java/eltos/simpledialogfragment/SimpleDialog.java and 1 other location - About 45 mins to fix
simpledialogfragments/src/main/java/eltos/simpledialogfragment/SimpleDialog.java on lines 415..422

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 54.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        for (int i = 0; i < labels.length && i < ids.length; i++) {
            list.add(new SimpleListItem(labels[i], ids[i]));
        }
Severity: Minor
Found in simpledialogfragments/src/main/java/eltos/simpledialogfragment/list/SimpleListDialog.java and 1 other location - About 40 mins to fix
simpledialogfragments/src/main/java/eltos/simpledialogfragment/list/AdvancedAdapter.java on lines 150..152

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 52.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        for (int i = 0; i < list.length && i < ids.length; i++) {
            mItems.add(new Item(list[i], ids[i]));
        }
Severity: Minor
Found in simpledialogfragments/src/main/java/eltos/simpledialogfragment/list/AdvancedAdapter.java and 1 other location - About 40 mins to fix
simpledialogfragments/src/main/java/eltos/simpledialogfragment/list/SimpleListDialog.java on lines 116..118

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 52.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        if (MeasureSpec.getMode(widthMeasureSpec) == MeasureSpec.EXACTLY ||
                MeasureSpec.getMode(widthMeasureSpec) == MeasureSpec.AT_MOST) {
            // limit to specified width
            size = Math.min(size, MeasureSpec.getSize(widthMeasureSpec));
        }
Severity: Minor
Found in simpledialogfragments/src/main/java/eltos/simpledialogfragment/color/ColorWheelView.java and 1 other location - About 40 mins to fix
simpledialogfragments/src/main/java/eltos/simpledialogfragment/color/ColorWheelView.java on lines 258..262

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        if (MeasureSpec.getMode(heightMeasureSpec) == MeasureSpec.EXACTLY ||
                MeasureSpec.getMode(heightMeasureSpec) == MeasureSpec.AT_MOST) {
            // limit to specified height
            size = Math.min(size, MeasureSpec.getSize(heightMeasureSpec));
        }
Severity: Minor
Found in simpledialogfragments/src/main/java/eltos/simpledialogfragment/color/ColorWheelView.java and 1 other location - About 40 mins to fix
simpledialogfragments/src/main/java/eltos/simpledialogfragment/color/ColorWheelView.java on lines 263..267

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

                        C.y + (B.y - C.y + (A.y - B.y) * mColor.sat()) * mColor.val());
Severity: Minor
Found in simpledialogfragments/src/main/java/eltos/simpledialogfragment/color/ColorWheelView.java and 1 other location - About 35 mins to fix
simpledialogfragments/src/main/java/eltos/simpledialogfragment/color/ColorWheelView.java on lines 773..773

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 44.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            double r = Math.sqrt(Math.pow(pointer.x - mCenter.x, 2)+Math.pow(pointer.y - mCenter.y, 2));
Severity: Minor
Found in simpledialogfragments/src/main/java/eltos/simpledialogfragment/color/ColorWheelView.java and 1 other location - About 35 mins to fix
simpledialogfragments/src/main/java/eltos/simpledialogfragment/color/ColorWheelView.java on lines 886..886

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 44.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            double r = Math.sqrt(Math.pow(pointer.x-center.x, 2) + Math.pow(pointer.y-center.y, 2));
Severity: Minor
Found in simpledialogfragments/src/main/java/eltos/simpledialogfragment/color/ColorWheelView.java and 1 other location - About 35 mins to fix
simpledialogfragments/src/main/java/eltos/simpledialogfragment/color/ColorWheelView.java on lines 622..622

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 44.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

                        C.x + (B.x - C.x + (A.x - B.x) * mColor.sat()) * mColor.val(),
Severity: Minor
Found in simpledialogfragments/src/main/java/eltos/simpledialogfragment/color/ColorWheelView.java and 1 other location - About 35 mins to fix
simpledialogfragments/src/main/java/eltos/simpledialogfragment/color/ColorWheelView.java on lines 774..774

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 44.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        dateLayout.setVisibility(field.type == DateTime.Type.DATETIME
                || field.type == DateTime.Type.DATE ? View.VISIBLE : View.GONE);
Severity: Minor
Found in simpledialogfragments/src/main/java/eltos/simpledialogfragment/form/DateTimeViewHolder.java and 1 other location - About 30 mins to fix
simpledialogfragments/src/main/java/eltos/simpledialogfragment/form/DateTimeViewHolder.java on lines 103..104

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 42.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        timeLayout.setVisibility(field.type == DateTime.Type.DATETIME
                || field.type == DateTime.Type.TIME ? View.VISIBLE : View.GONE);
Severity: Minor
Found in simpledialogfragments/src/main/java/eltos/simpledialogfragment/form/DateTimeViewHolder.java and 1 other location - About 30 mins to fix
simpledialogfragments/src/main/java/eltos/simpledialogfragment/form/DateTimeViewHolder.java on lines 87..88

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 42.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language