Block has too many lines. [134/25] Open
describe AccountRequestController do
let(:admin) { build(:admin, id: 3) }
let(:super_admin) { build(:superadmin) }
let(:instructor) { build(:instructor, id: 2) }
let(:student1) { build(:student, id: 1, name: :lily) }- Read upRead up
- Exclude checks
This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.
Block has too many lines. [58/25] Open
context '#create_approved_user' do
before(:each) do
allow(AccountRequest).to receive(:find_by).with(id: '4').and_return(requested_user1)
allow(User).to receive(:find_by).with(id: 3).and_return(admin)
end- Read upRead up
- Exclude checks
This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.
Block has too many lines. [28/25] Open
context '#create_requested_user_record' do
request_params = {
requested_user: { self_introduction: 'I am good' },
user: { name: 'instructor6',
role_id: 2,- Read upRead up
- Exclude checks
This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.
Similar blocks of code found in 4 locations. Consider refactoring. Open
let(:assignment) do
build(:assignment, id: 1, name: 'test_assignment', instructor_id: 2,
participants: [build(:participant, id: 1, user_id: 1, assignment: assignment)], course_id: 1)- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 25.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Redundant curly braces around a hash parameter. Open
allow(controller).to receive(:requested_user_params).and_return({ 'id' => '1' })- Read upRead up
- Exclude checks
This cop checks for braces around the last parameter in a method call
if the last parameter is a hash.
It supports braces, no_braces and context_dependent styles.
Example: EnforcedStyle: braces
# The `braces` style enforces braces around all method
# parameters that are hashes.
# bad
some_method(x, y, a: 1, b: 2)
# good
some_method(x, y, {a: 1, b: 2})Example: EnforcedStyle: no_braces (default)
# The `no_braces` style checks that the last parameter doesn't
# have braces around it.
# bad
some_method(x, y, {a: 1, b: 2})
# good
some_method(x, y, a: 1, b: 2)Example: EnforcedStyle: context_dependent
# The `context_dependent` style checks that the last parameter
# doesn't have braces around it, but requires braces if the
# second to last parameter is also a hash literal.
# bad
some_method(x, y, {a: 1, b: 2})
some_method(x, y, {a: 1, b: 2}, a: 1, b: 2)
# good
some_method(x, y, a: 1, b: 2)
some_method(x, y, {a: 1, b: 2}, {a: 1, b: 2})Redundant curly braces around a hash parameter. Open
allow(controller).to receive(:requested_user_params).and_return({ 'id' => '1' })- Read upRead up
- Exclude checks
This cop checks for braces around the last parameter in a method call
if the last parameter is a hash.
It supports braces, no_braces and context_dependent styles.
Example: EnforcedStyle: braces
# The `braces` style enforces braces around all method
# parameters that are hashes.
# bad
some_method(x, y, a: 1, b: 2)
# good
some_method(x, y, {a: 1, b: 2})Example: EnforcedStyle: no_braces (default)
# The `no_braces` style checks that the last parameter doesn't
# have braces around it.
# bad
some_method(x, y, {a: 1, b: 2})
# good
some_method(x, y, a: 1, b: 2)Example: EnforcedStyle: context_dependent
# The `context_dependent` style checks that the last parameter
# doesn't have braces around it, but requires braces if the
# second to last parameter is also a hash literal.
# bad
some_method(x, y, {a: 1, b: 2})
some_method(x, y, {a: 1, b: 2}, a: 1, b: 2)
# good
some_method(x, y, a: 1, b: 2)
some_method(x, y, {a: 1, b: 2}, {a: 1, b: 2})Redundant curly braces around a hash parameter. Open
allow(controller).to receive(:requested_user_params).and_return({ 'id' => '1' })- Read upRead up
- Exclude checks
This cop checks for braces around the last parameter in a method call
if the last parameter is a hash.
It supports braces, no_braces and context_dependent styles.
Example: EnforcedStyle: braces
# The `braces` style enforces braces around all method
# parameters that are hashes.
# bad
some_method(x, y, a: 1, b: 2)
# good
some_method(x, y, {a: 1, b: 2})Example: EnforcedStyle: no_braces (default)
# The `no_braces` style checks that the last parameter doesn't
# have braces around it.
# bad
some_method(x, y, {a: 1, b: 2})
# good
some_method(x, y, a: 1, b: 2)Example: EnforcedStyle: context_dependent
# The `context_dependent` style checks that the last parameter
# doesn't have braces around it, but requires braces if the
# second to last parameter is also a hash literal.
# bad
some_method(x, y, {a: 1, b: 2})
some_method(x, y, {a: 1, b: 2}, a: 1, b: 2)
# good
some_method(x, y, a: 1, b: 2)
some_method(x, y, {a: 1, b: 2}, {a: 1, b: 2})Redundant curly braces around a hash parameter. Open
allow(controller).to receive(:requested_user_params).and_return({ 'id' => '1' })- Read upRead up
- Exclude checks
This cop checks for braces around the last parameter in a method call
if the last parameter is a hash.
It supports braces, no_braces and context_dependent styles.
Example: EnforcedStyle: braces
# The `braces` style enforces braces around all method
# parameters that are hashes.
# bad
some_method(x, y, a: 1, b: 2)
# good
some_method(x, y, {a: 1, b: 2})Example: EnforcedStyle: no_braces (default)
# The `no_braces` style checks that the last parameter doesn't
# have braces around it.
# bad
some_method(x, y, {a: 1, b: 2})
# good
some_method(x, y, a: 1, b: 2)Example: EnforcedStyle: context_dependent
# The `context_dependent` style checks that the last parameter
# doesn't have braces around it, but requires braces if the
# second to last parameter is also a hash literal.
# bad
some_method(x, y, {a: 1, b: 2})
some_method(x, y, {a: 1, b: 2}, a: 1, b: 2)
# good
some_method(x, y, a: 1, b: 2)
some_method(x, y, {a: 1, b: 2}, {a: 1, b: 2})