expertiza/expertiza

This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.

This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.

This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.

This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 97.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 97.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:

- key (left align keys)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)

The treatment of hashes passed as the last argument to a method call can also be configured. The options are:

- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
- ignore_explicit (with curly braces)

Example:

# EnforcedHashRocketStyle: key (default)
# EnforcedColonStyle: key (default)

# good
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
  :ba => baz
}

# bad
{
  foo: bar,
   ba: baz
}
{
  :foo => bar,
   :ba => baz
}

Example:

# EnforcedHashRocketStyle: separator
# EnforcedColonStyle: separator

#good
{
  foo: bar,
   ba: baz
}
{
  :foo => bar,
   :ba => baz
}

#bad
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
  :ba => baz
}
{
  :foo => bar,
  :ba  => baz
}

Example:

# EnforcedHashRocketStyle: table
# EnforcedColonStyle: table

#good
{
  foo: bar,
  ba:  baz
}
{
  :foo => bar,
  :ba  => baz
}

#bad
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
   :ba => baz
}

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

This cops checks if empty lines around the bodies of blocks match the configuration.

Example: EnforcedStyle: empty_lines

# good

foo do |bar|

  # ...

end

Example: EnforcedStyle: noemptylines (default)

# good

foo do |bar|
  # ...
end

Checks for comma (,) not followed by some kind of space.

Example:

# bad
[1,2]
{ foo:bar,}

# good
[1, 2]
{ foo:bar, }

Checks for comma (,) not followed by some kind of space.

Example:

# bad
[1,2]
{ foo:bar,}

# good
[1, 2]
{ foo:bar, }

Checks for comma (,) not followed by some kind of space.

Example:

# bad
[1,2]
{ foo:bar,}

# good
[1, 2]
{ foo:bar, }

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Checks for comma (,) not followed by some kind of space.

Example:

# bad
[1,2]
{ foo:bar,}

# good
[1, 2]
{ foo:bar, }

Checks for comma (,) not followed by some kind of space.

Example:

# bad
[1,2]
{ foo:bar,}

# good
[1, 2]
{ foo:bar, }

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:

- key (left align keys)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)

The treatment of hashes passed as the last argument to a method call can also be configured. The options are:

- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
- ignore_explicit (with curly braces)

Example:

# EnforcedHashRocketStyle: key (default)
# EnforcedColonStyle: key (default)

# good
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
  :ba => baz
}

# bad
{
  foo: bar,
   ba: baz
}
{
  :foo => bar,
   :ba => baz
}

Example:

# EnforcedHashRocketStyle: separator
# EnforcedColonStyle: separator

#good
{
  foo: bar,
   ba: baz
}
{
  :foo => bar,
   :ba => baz
}

#bad
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
  :ba => baz
}
{
  :foo => bar,
  :ba  => baz
}

Example:

# EnforcedHashRocketStyle: table
# EnforcedColonStyle: table

#good
{
  foo: bar,
  ba:  baz
}
{
  :foo => bar,
  :ba  => baz
}

#bad
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
   :ba => baz
}

Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:

- key (left align keys)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)

The treatment of hashes passed as the last argument to a method call can also be configured. The options are:

- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
- ignore_explicit (with curly braces)

Example:

# EnforcedHashRocketStyle: key (default)
# EnforcedColonStyle: key (default)

# good
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
  :ba => baz
}

# bad
{
  foo: bar,
   ba: baz
}
{
  :foo => bar,
   :ba => baz
}

Example:

# EnforcedHashRocketStyle: separator
# EnforcedColonStyle: separator

#good
{
  foo: bar,
   ba: baz
}
{
  :foo => bar,
   :ba => baz
}

#bad
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
  :ba => baz
}
{
  :foo => bar,
  :ba  => baz
}

Example:

# EnforcedHashRocketStyle: table
# EnforcedColonStyle: table

#good
{
  foo: bar,
  ba:  baz
}
{
  :foo => bar,
  :ba  => baz
}

#bad
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
   :ba => baz
}

Checks for colon (:) not followed by some kind of space. N.B. this cop does not handle spaces after a ternary operator, which are instead handled by Layout/SpaceAroundOperators.

Example:

# bad
def f(a:, b:2); {a:3}; end

# good
def f(a:, b: 2); {a: 3}; end

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Checks for colon (:) not followed by some kind of space. N.B. this cop does not handle spaces after a ternary operator, which are instead handled by Layout/SpaceAroundOperators.

Example:

# bad
def f(a:, b:2); {a:3}; end

# good
def f(a:, b: 2); {a: 3}; end

Checks for comma (,) not followed by some kind of space.

Example:

# bad
[1,2]
{ foo:bar,}

# good
[1, 2]
{ foo:bar, }

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Checks for comma (,) not followed by some kind of space.

Example:

# bad
[1,2]
{ foo:bar,}

# good
[1, 2]
{ foo:bar, }

Checks for comma (,) not followed by some kind of space.

Example:

# bad
[1,2]
{ foo:bar,}

# good
[1, 2]
{ foo:bar, }

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Checks for colon (:) not followed by some kind of space. N.B. this cop does not handle spaces after a ternary operator, which are instead handled by Layout/SpaceAroundOperators.

Example:

# bad
def f(a:, b:2); {a:3}; end

# good
def f(a:, b: 2); {a: 3}; end

Checks for comma (,) not followed by some kind of space.

Example:

# bad
[1,2]
{ foo:bar,}

# good
[1, 2]
{ foo:bar, }

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:

- key (left align keys)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)

The treatment of hashes passed as the last argument to a method call can also be configured. The options are:

- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
- ignore_explicit (with curly braces)

Example:

# EnforcedHashRocketStyle: key (default)
# EnforcedColonStyle: key (default)

# good
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
  :ba => baz
}

# bad
{
  foo: bar,
   ba: baz
}
{
  :foo => bar,
   :ba => baz
}

Example:

# EnforcedHashRocketStyle: separator
# EnforcedColonStyle: separator

#good
{
  foo: bar,
   ba: baz
}
{
  :foo => bar,
   :ba => baz
}

#bad
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
  :ba => baz
}
{
  :foo => bar,
  :ba  => baz
}

Example:

# EnforcedHashRocketStyle: table
# EnforcedColonStyle: table

#good
{
  foo: bar,
  ba:  baz
}
{
  :foo => bar,
  :ba  => baz
}

#bad
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
   :ba => baz
}

Checks for colon (:) not followed by some kind of space. N.B. this cop does not handle spaces after a ternary operator, which are instead handled by Layout/SpaceAroundOperators.

Example:

# bad
def f(a:, b:2); {a:3}; end

# good
def f(a:, b: 2); {a: 3}; end

Checks for comma (,) not followed by some kind of space.

Example:

# bad
[1,2]
{ foo:bar,}

# good
[1, 2]
{ foo:bar, }

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Checks that braces used for hash literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space

# The `space` style enforces that hash literals have
# surrounding space.

# bad
h = {a: 1, b: 2}

# good
h = { a: 1, b: 2 }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that hash literals have
# no surrounding space.

# bad
h = { a: 1, b: 2 }

# good
h = {a: 1, b: 2}

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.

# bad
h = { a: { b: 2 } }

# good
h = { a: { b: 2 }}

Checks that braces used for hash literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space

# The `space` style enforces that hash literals have
# surrounding space.

# bad
h = {a: 1, b: 2}

# good
h = { a: 1, b: 2 }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that hash literals have
# no surrounding space.

# bad
h = { a: 1, b: 2 }

# good
h = {a: 1, b: 2}

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.

# bad
h = { a: { b: 2 } }

# good
h = { a: { b: 2 }}

Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:

- key (left align keys)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)

The treatment of hashes passed as the last argument to a method call can also be configured. The options are:

- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
- ignore_explicit (with curly braces)

Example:

# EnforcedHashRocketStyle: key (default)
# EnforcedColonStyle: key (default)

# good
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
  :ba => baz
}

# bad
{
  foo: bar,
   ba: baz
}
{
  :foo => bar,
   :ba => baz
}

Example:

# EnforcedHashRocketStyle: separator
# EnforcedColonStyle: separator

#good
{
  foo: bar,
   ba: baz
}
{
  :foo => bar,
   :ba => baz
}

#bad
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
  :ba => baz
}
{
  :foo => bar,
  :ba  => baz
}

Example:

# EnforcedHashRocketStyle: table
# EnforcedColonStyle: table

#good
{
  foo: bar,
  ba:  baz
}
{
  :foo => bar,
  :ba  => baz
}

#bad
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
   :ba => baz
}

Checks for colon (:) not followed by some kind of space. N.B. this cop does not handle spaces after a ternary operator, which are instead handled by Layout/SpaceAroundOperators.

Example:

# bad
def f(a:, b:2); {a:3}; end

# good
def f(a:, b: 2); {a: 3}; end

Checks for colon (:) not followed by some kind of space. N.B. this cop does not handle spaces after a ternary operator, which are instead handled by Layout/SpaceAroundOperators.

Example:

# bad
def f(a:, b:2); {a:3}; end

# good
def f(a:, b: 2); {a: 3}; end

Checks for comma (,) not followed by some kind of space.

Example:

# bad
[1,2]
{ foo:bar,}

# good
[1, 2]
{ foo:bar, }

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Checks that braces used for hash literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space

# The `space` style enforces that hash literals have
# surrounding space.

# bad
h = {a: 1, b: 2}

# good
h = { a: 1, b: 2 }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that hash literals have
# no surrounding space.

# bad
h = { a: 1, b: 2 }

# good
h = {a: 1, b: 2}

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.

# bad
h = { a: { b: 2 } }

# good
h = { a: { b: 2 }}

Checks that braces used for hash literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space

# The `space` style enforces that hash literals have
# surrounding space.

# bad
h = {a: 1, b: 2}

# good
h = { a: 1, b: 2 }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that hash literals have
# no surrounding space.

# bad
h = { a: 1, b: 2 }

# good
h = {a: 1, b: 2}

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.

# bad
h = { a: { b: 2 } }

# good
h = { a: { b: 2 }}

Checks that braces used for hash literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space

# The `space` style enforces that hash literals have
# surrounding space.

# bad
h = {a: 1, b: 2}

# good
h = { a: 1, b: 2 }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that hash literals have
# no surrounding space.

# bad
h = { a: 1, b: 2 }

# good
h = {a: 1, b: 2}

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.

# bad
h = { a: { b: 2 } }

# good
h = { a: { b: 2 }}

Checks for colon (:) not followed by some kind of space. N.B. this cop does not handle spaces after a ternary operator, which are instead handled by Layout/SpaceAroundOperators.

Example:

# bad
def f(a:, b:2); {a:3}; end

# good
def f(a:, b: 2); {a: 3}; end

Checks for comma (,) not followed by some kind of space.

Example:

# bad
[1,2]
{ foo:bar,}

# good
[1, 2]
{ foo:bar, }

Checks for comma (,) not followed by some kind of space.

Example:

# bad
[1,2]
{ foo:bar,}

# good
[1, 2]
{ foo:bar, }

Checks for comma (,) not followed by some kind of space.

Example:

# bad
[1,2]
{ foo:bar,}

# good
[1, 2]
{ foo:bar, }

Checks that braces used for hash literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space

# The `space` style enforces that hash literals have
# surrounding space.

# bad
h = {a: 1, b: 2}

# good
h = { a: 1, b: 2 }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that hash literals have
# no surrounding space.

# bad
h = { a: 1, b: 2 }

# good
h = {a: 1, b: 2}

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.

# bad
h = { a: { b: 2 } }

# good
h = { a: { b: 2 }}

Checks for comma (,) not followed by some kind of space.

Example:

# bad
[1,2]
{ foo:bar,}

# good
[1, 2]
{ foo:bar, }

Checks for comma (,) not followed by some kind of space.

Example:

# bad
[1,2]
{ foo:bar,}

# good
[1, 2]
{ foo:bar, }

Checks that braces used for hash literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space

# The `space` style enforces that hash literals have
# surrounding space.

# bad
h = {a: 1, b: 2}

# good
h = { a: 1, b: 2 }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that hash literals have
# no surrounding space.

# bad
h = { a: 1, b: 2 }

# good
h = {a: 1, b: 2}

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.

# bad
h = { a: { b: 2 } }

# good
h = { a: { b: 2 }}

Checks for colon (:) not followed by some kind of space. N.B. this cop does not handle spaces after a ternary operator, which are instead handled by Layout/SpaceAroundOperators.

Example:

# bad
def f(a:, b:2); {a:3}; end

# good
def f(a:, b: 2); {a: 3}; end

Checks for colon (:) not followed by some kind of space. N.B. this cop does not handle spaces after a ternary operator, which are instead handled by Layout/SpaceAroundOperators.

Example:

# bad
def f(a:, b:2); {a:3}; end

# good
def f(a:, b: 2); {a: 3}; end

Checks for comma (,) not followed by some kind of space.

Example:

# bad
[1,2]
{ foo:bar,}

# good
[1, 2]
{ foo:bar, }

Checks for comma (,) not followed by some kind of space.

Example:

# bad
[1,2]
{ foo:bar,}

# good
[1, 2]
{ foo:bar, }

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Checks that braces used for hash literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space

# The `space` style enforces that hash literals have
# surrounding space.

# bad
h = {a: 1, b: 2}

# good
h = { a: 1, b: 2 }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that hash literals have
# no surrounding space.

# bad
h = { a: 1, b: 2 }

# good
h = {a: 1, b: 2}

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.

# bad
h = { a: { b: 2 } }

# good
h = { a: { b: 2 }}

Checks for colon (:) not followed by some kind of space. N.B. this cop does not handle spaces after a ternary operator, which are instead handled by Layout/SpaceAroundOperators.

Example:

# bad
def f(a:, b:2); {a:3}; end

# good
def f(a:, b: 2); {a: 3}; end

Checks for colon (:) not followed by some kind of space. N.B. this cop does not handle spaces after a ternary operator, which are instead handled by Layout/SpaceAroundOperators.

Example:

# bad
def f(a:, b:2); {a:3}; end

# good
def f(a:, b: 2); {a: 3}; end

Checks for comma (,) not followed by some kind of space.

Example:

# bad
[1,2]
{ foo:bar,}

# good
[1, 2]
{ foo:bar, }

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Checks that braces used for hash literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space

# The `space` style enforces that hash literals have
# surrounding space.

# bad
h = {a: 1, b: 2}

# good
h = { a: 1, b: 2 }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that hash literals have
# no surrounding space.

# bad
h = { a: 1, b: 2 }

# good
h = {a: 1, b: 2}

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.

# bad
h = { a: { b: 2 } }

# good
h = { a: { b: 2 }}

Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:

- key (left align keys)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)

The treatment of hashes passed as the last argument to a method call can also be configured. The options are:

- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
- ignore_explicit (with curly braces)

Example:

# EnforcedHashRocketStyle: key (default)
# EnforcedColonStyle: key (default)

# good
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
  :ba => baz
}

# bad
{
  foo: bar,
   ba: baz
}
{
  :foo => bar,
   :ba => baz
}

Example:

# EnforcedHashRocketStyle: separator
# EnforcedColonStyle: separator

#good
{
  foo: bar,
   ba: baz
}
{
  :foo => bar,
   :ba => baz
}

#bad
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
  :ba => baz
}
{
  :foo => bar,
  :ba  => baz
}

Example:

# EnforcedHashRocketStyle: table
# EnforcedColonStyle: table

#good
{
  foo: bar,
  ba:  baz
}
{
  :foo => bar,
  :ba  => baz
}

#bad
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
   :ba => baz
}

Checks for colon (:) not followed by some kind of space. N.B. this cop does not handle spaces after a ternary operator, which are instead handled by Layout/SpaceAroundOperators.

Example:

# bad
def f(a:, b:2); {a:3}; end

# good
def f(a:, b: 2); {a: 3}; end

Checks for colon (:) not followed by some kind of space. N.B. this cop does not handle spaces after a ternary operator, which are instead handled by Layout/SpaceAroundOperators.

Example:

# bad
def f(a:, b:2); {a:3}; end

# good
def f(a:, b: 2); {a: 3}; end

Checks for comma (,) not followed by some kind of space.

Example:

# bad
[1,2]
{ foo:bar,}

# good
[1, 2]
{ foo:bar, }

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:

- key (left align keys)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)

The treatment of hashes passed as the last argument to a method call can also be configured. The options are:

- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
- ignore_explicit (with curly braces)

Example:

# EnforcedHashRocketStyle: key (default)
# EnforcedColonStyle: key (default)

# good
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
  :ba => baz
}

# bad
{
  foo: bar,
   ba: baz
}
{
  :foo => bar,
   :ba => baz
}

Example:

# EnforcedHashRocketStyle: separator
# EnforcedColonStyle: separator

#good
{
  foo: bar,
   ba: baz
}
{
  :foo => bar,
   :ba => baz
}

#bad
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
  :ba => baz
}
{
  :foo => bar,
  :ba  => baz
}

Example:

# EnforcedHashRocketStyle: table
# EnforcedColonStyle: table

#good
{
  foo: bar,
  ba:  baz
}
{
  :foo => bar,
  :ba  => baz
}

#bad
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
   :ba => baz
}

Checks for comma (,) not followed by some kind of space.

Example:

# bad
[1,2]
{ foo:bar,}

# good
[1, 2]
{ foo:bar, }

Checks for comma (,) not followed by some kind of space.

Example:

# bad
[1,2]
{ foo:bar,}

# good
[1, 2]
{ foo:bar, }

Checks for comma (,) not followed by some kind of space.

Example:

# bad
[1,2]
{ foo:bar,}

# good
[1, 2]
{ foo:bar, }

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks that braces used for hash literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space

# The `space` style enforces that hash literals have
# surrounding space.

# bad
h = {a: 1, b: 2}

# good
h = { a: 1, b: 2 }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that hash literals have
# no surrounding space.

# bad
h = { a: 1, b: 2 }

# good
h = {a: 1, b: 2}

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.

# bad
h = { a: { b: 2 } }

# good
h = { a: { b: 2 }}

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks that braces used for hash literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space

# The `space` style enforces that hash literals have
# surrounding space.

# bad
h = {a: 1, b: 2}

# good
h = { a: 1, b: 2 }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that hash literals have
# no surrounding space.

# bad
h = { a: 1, b: 2 }

# good
h = {a: 1, b: 2}

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.

# bad
h = { a: { b: 2 } }

# good
h = { a: { b: 2 }}

This cop checks hash literal syntax.

It can enforce either the use of the class hash rocket syntax or the use of the newer Ruby 1.9 syntax (when applicable).

A separate offense is registered for each problematic pair.

The supported styles are:

• ruby19 - forces use of the 1.9 syntax (e.g. {a: 1}) when hashes have all symbols for keys
• hash_rockets - forces use of hash rockets for all hashes
• nomixedkeys - simply checks for hashes with mixed syntaxes
• ruby19nomixed_keys - forces use of ruby 1.9 syntax and forbids mixed syntax hashes

Example: EnforcedStyle: ruby19 (default)

# bad
{:a => 2}
{b: 1, :c => 2}

# good
{a: 2, b: 1}
{:c => 2, 'd' => 2} # acceptable since 'd' isn't a symbol
{d: 1, 'e' => 2} # technically not forbidden

Example: EnforcedStyle: hash_rockets

# bad
{a: 1, b: 2}
{c: 1, 'd' => 5}

# good
{:a => 1, :b => 2}

Example: EnforcedStyle: nomixedkeys

# bad
{:a => 1, b: 2}
{c: 1, 'd' => 2}

# good
{:a => 1, :b => 2}
{c: 1, d: 2}

Example: EnforcedStyle: ruby19nomixed_keys

# bad
{:a => 1, :b => 2}
{c: 2, 'd' => 3} # should just use hash rockets

# good
{a: 1, b: 2}
{:c => 3, 'd' => 4}

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Use symbols as procs when possible.

Example:

# bad
something.map { |s| s.upcase }

# good
something.map(&:upcase)

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks that braces used for hash literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space

# The `space` style enforces that hash literals have
# surrounding space.

# bad
h = {a: 1, b: 2}

# good
h = { a: 1, b: 2 }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that hash literals have
# no surrounding space.

# bad
h = { a: 1, b: 2 }

# good
h = {a: 1, b: 2}

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.

# bad
h = { a: { b: 2 } }

# good
h = { a: { b: 2 }}

Checks that braces used for hash literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space

# The `space` style enforces that hash literals have
# surrounding space.

# bad
h = {a: 1, b: 2}

# good
h = { a: 1, b: 2 }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that hash literals have
# no surrounding space.

# bad
h = { a: 1, b: 2 }

# good
h = {a: 1, b: 2}

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.

# bad
h = { a: { b: 2 } }

# good
h = { a: { b: 2 }}

This cop checks for braces around the last parameter in a method call if the last parameter is a hash. It supports braces, no_braces and context_dependent styles.

Example: EnforcedStyle: braces

# The `braces` style enforces braces around all method
# parameters that are hashes.

# bad
some_method(x, y, a: 1, b: 2)

# good
some_method(x, y, {a: 1, b: 2})

Example: EnforcedStyle: no_braces (default)

# The `no_braces` style checks that the last parameter doesn't
# have braces around it.

# bad
some_method(x, y, {a: 1, b: 2})

# good
some_method(x, y, a: 1, b: 2)

Example: EnforcedStyle: context_dependent

# The `context_dependent` style checks that the last parameter
# doesn't have braces around it, but requires braces if the
# second to last parameter is also a hash literal.

# bad
some_method(x, y, {a: 1, b: 2})
some_method(x, y, {a: 1, b: 2}, a: 1, b: 2)

# good
some_method(x, y, a: 1, b: 2)
some_method(x, y, {a: 1, b: 2}, {a: 1, b: 2})

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Use symbols as procs when possible.

Example:

# bad
something.map { |s| s.upcase }

# good
something.map(&:upcase)

Use symbols as procs when possible.

Example:

# bad
something.map { |s| s.upcase }

# good
something.map(&:upcase)

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

This cop checks hash literal syntax.

It can enforce either the use of the class hash rocket syntax or the use of the newer Ruby 1.9 syntax (when applicable).

A separate offense is registered for each problematic pair.

The supported styles are:

• ruby19 - forces use of the 1.9 syntax (e.g. {a: 1}) when hashes have all symbols for keys
• hash_rockets - forces use of hash rockets for all hashes
• nomixedkeys - simply checks for hashes with mixed syntaxes
• ruby19nomixed_keys - forces use of ruby 1.9 syntax and forbids mixed syntax hashes

Example: EnforcedStyle: ruby19 (default)

# bad
{:a => 2}
{b: 1, :c => 2}

# good
{a: 2, b: 1}
{:c => 2, 'd' => 2} # acceptable since 'd' isn't a symbol
{d: 1, 'e' => 2} # technically not forbidden

Example: EnforcedStyle: hash_rockets

# bad
{a: 1, b: 2}
{c: 1, 'd' => 5}

# good
{:a => 1, :b => 2}

Example: EnforcedStyle: nomixedkeys

# bad
{:a => 1, b: 2}
{c: 1, 'd' => 2}

# good
{:a => 1, :b => 2}
{c: 1, d: 2}

Example: EnforcedStyle: ruby19nomixed_keys

# bad
{:a => 1, :b => 2}
{c: 2, 'd' => 3} # should just use hash rockets

# good
{a: 1, b: 2}
{:c => 3, 'd' => 4}

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks that braces used for hash literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space

# The `space` style enforces that hash literals have
# surrounding space.

# bad
h = {a: 1, b: 2}

# good
h = { a: 1, b: 2 }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that hash literals have
# no surrounding space.

# bad
h = { a: 1, b: 2 }

# good
h = {a: 1, b: 2}

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.

# bad
h = { a: { b: 2 } }

# good
h = { a: { b: 2 }}

Checks that braces used for hash literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space

# The `space` style enforces that hash literals have
# surrounding space.

# bad
h = {a: 1, b: 2}

# good
h = { a: 1, b: 2 }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that hash literals have
# no surrounding space.

# bad
h = { a: 1, b: 2 }

# good
h = {a: 1, b: 2}

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.

# bad
h = { a: { b: 2 } }

# good
h = { a: { b: 2 }}

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks that braces used for hash literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space

# The `space` style enforces that hash literals have
# surrounding space.

# bad
h = {a: 1, b: 2}

# good
h = { a: 1, b: 2 }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that hash literals have
# no surrounding space.

# bad
h = { a: 1, b: 2 }

# good
h = {a: 1, b: 2}

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.

# bad
h = { a: { b: 2 } }

# good
h = { a: { b: 2 }}

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Use symbols as procs when possible.

Example:

# bad
something.map { |s| s.upcase }

# good
something.map(&:upcase)

Checks that braces used for hash literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space

# The `space` style enforces that hash literals have
# surrounding space.

# bad
h = {a: 1, b: 2}

# good
h = { a: 1, b: 2 }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that hash literals have
# no surrounding space.

# bad
h = { a: 1, b: 2 }

# good
h = {a: 1, b: 2}

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.

# bad
h = { a: { b: 2 } }

# good
h = { a: { b: 2 }}

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks that braces used for hash literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space

# The `space` style enforces that hash literals have
# surrounding space.

# bad
h = {a: 1, b: 2}

# good
h = { a: 1, b: 2 }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that hash literals have
# no surrounding space.

# bad
h = { a: 1, b: 2 }

# good
h = {a: 1, b: 2}

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.

# bad
h = { a: { b: 2 } }

# good
h = { a: { b: 2 }}

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Use symbols as procs when possible.

Example:

# bad
something.map { |s| s.upcase }

# good
something.map(&:upcase)