expertiza/expertiza

View on GitHub
spec/controllers/courses_controller_spec.rb

Summary

Maintainability
A
1 hr
Test Coverage

Block has too many lines. [152/25]
Open

describe CoursesController do
  let(:instructor) { build(:instructor, id: 6) }
  let(:instructor2) { build(:instructor, id:6666)}
  let(:student) { build(:student) }
  let(:course) { double('Course', instructor_id: 6, path: '/cscs', name: 'abc') }

This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.

Similar blocks of code found in 5 locations. Consider refactoring.
Open

  describe '#delete' do
    it 'deletes the course and redirects to tree_display#list page' do
      allow(Course).to receive(:find).with('1').and_return(course)
      allow(course).to receive(:destroy).and_return(true)
      request_params = { id: 1 }
Severity: Major
Found in spec/controllers/courses_controller_spec.rb and 4 other locations - About 50 mins to fix
spec/controllers/participants_controller_spec.rb on lines 41..48
spec/controllers/participants_controller_spec.rb on lines 52..59
spec/controllers/participants_controller_spec.rb on lines 145..152
spec/controllers/participants_controller_spec.rb on lines 188..195

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 43.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    context 'when @course is not nil' do
      it 'renders the course#edit page' do
        allow(Course).to receive(:find).with('1').and_return(double('Course', instructor_id: 6))
        user_session = { user: instructor }
        request_params = { id: 1 }
Severity: Minor
Found in spec/controllers/courses_controller_spec.rb and 1 other location - About 45 mins to fix
spec/controllers/questionnaires_controller_spec.rb on lines 204..210

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 40.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    it 'sets the private instance variable' do
      request_params = { private: 1 }
      user_session = { user: instructor }
      get :new, params: request_params, session: user_session
      expect(controller.instance_variable_get(:@private)).to eq('1')
Severity: Minor
Found in spec/controllers/courses_controller_spec.rb and 1 other location - About 15 mins to fix
spec/controllers/eula_controller_spec.rb on lines 60..64

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 26.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Space missing inside }.
Open

    let(:ccc) { build(:course)}

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Space missing inside }.
Open

    let(:course) { build(:course)}

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Space missing inside }.
Open

    let(:user) { build(:student)}

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Space inside } missing.
Open

      get :auto_complete_for_user_name, params: {user: { login: 'test' }}

Checks that braces used for hash literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space

# The `space` style enforces that hash literals have
# surrounding space.

# bad
h = {a: 1, b: 2}

# good
h = { a: 1, b: 2 }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that hash literals have
# no surrounding space.

# bad
h = { a: 1, b: 2 }

# good
h = {a: 1, b: 2}

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.

# bad
h = { a: { b: 2 } }

# good
h = { a: { b: 2 }}

Space missing inside }.
Open

  let(:instructor2) { build(:instructor, id:6666)}

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Space missing after colon.
Open

  let(:instructor2) { build(:instructor, id:6666)}

Checks for colon (:) not followed by some kind of space. N.B. this cop does not handle spaces after a ternary operator, which are instead handled by Layout/SpaceAroundOperators.

Example:

# bad
def f(a:, b:2); {a:3}; end

# good
def f(a:, b: 2); {a: 3}; end

Do not use space inside array brackets.
Open

      allow(User).to receive(:find).with(:all, { conditions: [ 'LOWER(login) LIKE ?', '%test%' ], limit: 10 }).and_return([])

Checks that brackets used for array literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space

# The `space` style enforces that array literals have
# surrounding space.

# bad
array = [a, b, c, d]

# good
array = [ a, b, c, d ]

Example: EnforcedStyle: no_space

# The `no_space` style enforces that array literals have
# no surrounding space.

# bad
array = [ a, b, c, d ]

# good
array = [a, b, c, d]

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# array brackets, with the exception that successive left
# or right brackets are collapsed together in nested arrays.

# bad
array = [ a, [ b, c ] ]

# good
array = [ a, [ b, c ]]

Space missing inside }.
Open

    let(:ta_mapping) { build(:ta_mapping)}

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Space inside { missing.
Open

      get :auto_complete_for_user_name, params: {user: { login: 'test' }}

Checks that braces used for hash literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space

# The `space` style enforces that hash literals have
# surrounding space.

# bad
h = {a: 1, b: 2}

# good
h = { a: 1, b: 2 }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that hash literals have
# no surrounding space.

# bad
h = { a: 1, b: 2 }

# good
h = {a: 1, b: 2}

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.

# bad
h = { a: { b: 2 } }

# good
h = { a: { b: 2 }}

Do not use space inside array brackets.
Open

      allow(User).to receive(:find).with(:all, { conditions: [ 'LOWER(login) LIKE ?', '%test%' ], limit: 10 }).and_return([])

Checks that brackets used for array literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space

# The `space` style enforces that array literals have
# surrounding space.

# bad
array = [a, b, c, d]

# good
array = [ a, b, c, d ]

Example: EnforcedStyle: no_space

# The `no_space` style enforces that array literals have
# no surrounding space.

# bad
array = [ a, b, c, d ]

# good
array = [a, b, c, d]

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# array brackets, with the exception that successive left
# or right brackets are collapsed together in nested arrays.

# bad
array = [ a, [ b, c ] ]

# good
array = [ a, [ b, c ]]

Space missing inside }.
Open

    let(:ta) { build(:student)}

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Redundant curly braces around a hash parameter.
Open

      allow(User).to receive(:find).with(:all, { conditions: [ 'LOWER(login) LIKE ?', '%test%' ], limit: 10 }).and_return([])

This cop checks for braces around the last parameter in a method call if the last parameter is a hash. It supports braces, no_braces and context_dependent styles.

Example: EnforcedStyle: braces

# The `braces` style enforces braces around all method
# parameters that are hashes.

# bad
some_method(x, y, a: 1, b: 2)

# good
some_method(x, y, {a: 1, b: 2})

Example: EnforcedStyle: no_braces (default)

# The `no_braces` style checks that the last parameter doesn't
# have braces around it.

# bad
some_method(x, y, {a: 1, b: 2})

# good
some_method(x, y, a: 1, b: 2)

Example: EnforcedStyle: context_dependent

# The `context_dependent` style checks that the last parameter
# doesn't have braces around it, but requires braces if the
# second to last parameter is also a hash literal.

# bad
some_method(x, y, {a: 1, b: 2})
some_method(x, y, {a: 1, b: 2}, a: 1, b: 2)

# good
some_method(x, y, a: 1, b: 2)
some_method(x, y, {a: 1, b: 2}, {a: 1, b: 2})

Space missing inside }.
Open

    let(:course) { build(:course)}

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

There are no issues that match your filters.

Category
Status