Block has too many lines. [794/25] Open
describe ReviewMappingHelper, type: :helper do
let(:team) { build(:assignment_team, id: 1) }
let(:test_item) { build(:answer, id: 1, comments: 'https://wiki.archlinux.org/') }
let(:test_response) { build(:response, id: 1) }
describe 'get_team_color' do
- Read upRead up
- Exclude checks
This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.
File review_mapping_helper_spec.rb
has 798 lines of code (exceeds 250 allowed). Consider refactoring. Open
require 'spec_helper'
require 'rails_helper'
describe ReviewMappingHelper, type: :helper do
let(:team) { build(:assignment_team, id: 1) }
Block has too many lines. [91/25] Open
describe 'get_team_color' do
before(:each) do
@assignment = create(:assignment, created_at: DateTime.now.in_time_zone - 13.day)
@reviewer = create(:participant, review_grade: nil)
@reviewee = create(:assignment_team)
- Read upRead up
- Exclude checks
This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.
Block has too many lines. [69/25] Open
describe 'response_for_each_round?' do
before(:each) do
@assignment = create(:assignment, created_at: DateTime.now.in_time_zone - 13.day)
@reviewer = create(:participant, review_grade: nil)
@reviewee = create(:assignment_team)
- Read upRead up
- Exclude checks
This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.
Block has too many lines. [65/25] Open
describe 'check_submission_state' do
before(:each) do
@assignment = create(:assignment, created_at: DateTime.now.in_time_zone - 13.day)
@reviewer = create(:participant, review_grade: nil)
@reviewee = create(:assignment_team, assignment: @assignment)
- Read upRead up
- Exclude checks
This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.
Block has too many lines. [63/25] Open
describe 'obtain_team_color' do
before(:each) do
# create assignment and respective reviewer, reviewee instance variables
@assignment = create(:assignment, created_at: DateTime.now.in_time_zone - 13.day)
@reviewer = create(:participant, review_grade: nil)
- Read upRead up
- Exclude checks
This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.
Block has too many lines. [63/25] Open
describe 'review_metrics' do
before(:each) do
create(:deadline_right, name: 'No')
create(:deadline_right, name: 'Late')
create(:deadline_right, name: 'OK')
- Read upRead up
- Exclude checks
This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.
Block has too many lines. [63/25] Open
describe 'submitted_within_round?' do
before(:each) do
@assignment = create(:assignment, name: 'assignment', created_at: DateTime.now.in_time_zone - 13.day)
@reviewer = create(:participant, review_grade: nil)
@reviewee = create(:assignment_team, assignment: @assignment)
- Read upRead up
- Exclude checks
This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.
Block has too many lines. [49/25] Open
describe 'submitted_hyperlink' do
before(:each) do
@assignment = create(:assignment, name: 'assignment', created_at: DateTime.now.in_time_zone - 13.day)
@reviewer = create(:participant, review_grade: nil)
@reviewee = create(:assignment_team, assignment: @assignment)
- Read upRead up
- Exclude checks
This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.
Block has too many lines. [44/25] Open
describe 'get_each_review_and_feedback_response' do
before(:each) do
create(:deadline_right, name: 'No')
create(:deadline_right, name: 'Late')
create(:deadline_right, name: 'OK')
- Read upRead up
- Exclude checks
This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.
Block has too many lines. [40/25] Open
before(:each) do
create(:deadline_right, name: 'No')
create(:deadline_right, name: 'Late')
create(:deadline_right, name: 'OK')
- Read upRead up
- Exclude checks
This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.
Block has too many lines. [37/25] Open
describe 'sort_reviewer_by_review_volume_desc' do
before(:each) do
@assignment = create(:assignment, name: 'assignment', created_at: DateTime.now.in_time_zone - 13.day)
@reviewee = create(:assignment_team, assignment: @assignment)
- Read upRead up
- Exclude checks
This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.
Block has too many lines. [36/25] Open
describe 'get_team_reviewed_link_name' do
before(:each) do
@assignment = create(:assignment, created_at: DateTime.now.in_time_zone - 13.day)
@reviewer = create(:participant, review_grade: nil)
- Read upRead up
- Exclude checks
This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.
Block has too many lines. [35/25] Open
describe 'feedback_response_map_record' do
before(:each) do
@reviewer = create(:participant)
@response_map_1 = create(:review_response_map, reviewer: @reviewer)
- Read upRead up
- Exclude checks
This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.
Similar blocks of code found in 2 locations. Consider refactoring. Open
it 'should return false if only have second response' do
create(:deadline_right, name: 'No')
create(:deadline_right, name: 'Late')
create(:deadline_right, name: 'OK')
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 121.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
it 'should return false if only have first response' do
create(:deadline_right, name: 'No')
create(:deadline_right, name: 'Late')
create(:deadline_right, name: 'OK')
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 121.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
it 'should return https://wiki.archlinux.org/123 if only a work was submitted on time' do
create(:deadline_right, name: 'No')
create(:deadline_right, name: 'Late')
create(:deadline_right, name: 'OK')
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'https://wiki.archlinux.org/', created_at: DateTime.now.in_time_zone - 8.day)
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 119.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
it 'should return true if first work was submitted late' do
create(:deadline_right, name: 'No')
create(:deadline_right, name: 'Late')
create(:deadline_right, name: 'OK')
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'https://wiki.archlinux.org/', created_at: DateTime.now.in_time_zone - 7.day)
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 119.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
it 'should return https://wiki.archlinux.org/ if only a work was submitted on time' do
create(:deadline_right, name: 'No')
create(:deadline_right, name: 'Late')
create(:deadline_right, name: 'OK')
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'https://wiki.archlinux.org/', created_at: DateTime.now.in_time_zone - 12.day)
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 119.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
it 'should return false if second work was submitted late' do
create(:deadline_right, name: 'No')
create(:deadline_right, name: 'Late')
create(:deadline_right, name: 'OK')
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'https://wiki.archlinux.org/', created_at: DateTime.now.in_time_zone - 11.day)
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 119.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
it 'should return https://wiki.archlinux.org/123 if works was submitted on time' do
create(:deadline_right, name: 'No')
create(:deadline_right, name: 'Late')
create(:deadline_right, name: 'OK')
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'https://wiki.archlinux.org/', created_at: DateTime.now.in_time_zone - 12.day)
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 119.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
it 'should return true if works were submitted within 2 round' do
create(:deadline_right, name: 'No')
create(:deadline_right, name: 'Late')
create(:deadline_right, name: 'OK')
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'https://wiki.archlinux.org/', created_at: DateTime.now.in_time_zone - 7.day)
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 119.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
it 'should return false if both works was submitted late' do
create(:deadline_right, name: 'No')
create(:deadline_right, name: 'Late')
create(:deadline_right, name: 'OK')
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'https://wiki.archlinux.org/', created_at: DateTime.now.in_time_zone - 4.day)
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 119.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
xit 'should return purple color if the assignment was submitted within the round' do
create(:deadline_right, name: 'No')
create(:deadline_right, name: 'Late')
create(:deadline_right, name: 'OK')
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'https://wiki.archlinux.org/', created_at: DateTime.now.in_time_zone - 7.day)
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 105.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
it 'should return green color if the assignment was not submitted within the round' do
create(:deadline_right, name: 'No')
create(:deadline_right, name: 'Late')
create(:deadline_right, name: 'OK')
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'https://wiki.archlinux.org/', created_at: DateTime.now.in_time_zone + 7.day)
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 105.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
it 'should return green color if the submitted link is not a wiki link' do
create(:deadline_right, name: 'No')
create(:deadline_right, name: 'Late')
create(:deadline_right, name: 'OK')
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'https://google.com/', created_at: DateTime.now.in_time_zone - 7.day)
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 105.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
it 'color should be green if the submission link is non-existent' do
# deadline_right inspired from bookmark_review_spec
create(:deadline_right, name: 'No')
create(:deadline_right, name: 'Late')
create(:deadline_right, name: 'OK')
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 52.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
it 'color should NOT be blue if the a review was NOT submitted for each round' do
# deadline_right inspired from bookmark_review_spec
create(:deadline_right, name: 'No')
create(:deadline_right, name: 'Late')
create(:deadline_right, name: 'OK')
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 52.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
it 'the order should be 1-2-3 if the comment volume is 1 = 2 = 3' do
@response_1 = create(:response, response_map: @response_map_1, additional_comment: 'good job')
@response_2 = create(:response, response_map: @response_map_2, additional_comment: 'clear code')
@response_3 = create(:response, response_map: @response_map_3, additional_comment: 'nice bro')
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 46.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
it 'the order should be 2-3-1 if the order of comment volume is 2 > 3 > 1' do
@response_1 = create(:response, response_map: @response_map_1, additional_comment: 'good')
@response_2 = create(:response, response_map: @response_map_2, additional_comment: 'Good job with clear code')
@response_3 = create(:response, response_map: @response_map_3, additional_comment: 'goodclear code')
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 46.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
it 'the order should be 2-1-3 if the comment volume is 2 > 1 = 3' do
@response_1 = create(:response, response_map: @response_map_1, additional_comment: 'good job')
@response_2 = create(:response, response_map: @response_map_2, additional_comment: 'Good job with clear code')
@response_3 = create(:response, response_map: @response_map_3, additional_comment: 'clear code')
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 46.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
before(:each) do
@assignment = create(:assignment, name: 'assignment', created_at: DateTime.now.in_time_zone - 13.day)
@reviewer = create(:participant, review_grade: nil)
@reviewee = create(:assignment_team, assignment: @assignment)
@response_map = create(:review_response_map, reviewer: @reviewer, reviewee: @reviewee)
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 39.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
before(:each) do
@assignment = create(:assignment, name: 'assignment', created_at: DateTime.now.in_time_zone - 13.day)
@reviewer = create(:participant, review_grade: nil)
@reviewee = create(:assignment_team, assignment: @assignment)
@response_map = create(:review_response_map, reviewer: @reviewer, reviewee: @reviewee)
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 39.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
before(:each) do
@assignment = create(:assignment, created_at: DateTime.now.in_time_zone - 13.day)
@reviewer = create(:participant, review_grade: nil)
@reviewee = create(:assignment_team)
@reviewee_with_assignment = create(:assignment_team, assignment: @assignment)
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 36.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
before(:each) do
@assignment = create(:assignment, created_at: DateTime.now.in_time_zone - 13.day)
@reviewer = create(:participant, review_grade: nil)
@reviewee = create(:assignment_team)
@reviewee_with_assignment = create(:assignment_team, assignment: @assignment)
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 36.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
before(:each) do
# create assignment and respective reviewer, reviewee instance variables
@assignment = create(:assignment, created_at: DateTime.now.in_time_zone - 13.day)
@reviewer = create(:participant, review_grade: nil)
@reviewee = create(:assignment_team, assignment: @assignment)
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 35.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
before(:each) do
@assignment = create(:assignment, created_at: DateTime.now.in_time_zone - 13.day)
@reviewer = create(:participant, review_grade: nil)
@reviewee = create(:assignment_team, assignment: @assignment)
@response_map = create(:review_response_map, reviewer: @reviewer, reviewee: @reviewee)
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 35.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
it 'should return (Team_1) if max_team_size = 2' do
max_team_size = 2
@response = create(:response, response_map: @response_map)
ip_address = '0.0.0.0'
reviewed_team_name = get_team_reviewed_link_name(max_team_size, @response, @reviewee.id, ip_address)
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 26.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
it 'should return (Team_1) if max_team_size = 3' do
max_team_size = 3
@response = create(:response, response_map: @response_map)
ip_address = '0.0.0.0'
reviewed_team_name = get_team_reviewed_link_name(max_team_size, @response, @reviewee.id, ip_address)
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 26.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
it 'should return (Team_1) if max_team_size = 0' do
max_team_size = 0
@response = create(:response, response_map: @response_map)
ip_address = '0.0.0.0'
reviewed_team_name = get_team_reviewed_link_name(max_team_size, @response, @reviewee.id, ip_address)
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 26.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
it 'should return the minimum, maximum and average score for round 3' do
@round = 3
review_metrics(@round, @reviewee.id)
expect(@min).to eq '8%'
expect(@max).to eq '10%'
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 25.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
it 'should return the minimum, maximum and average score for round 2' do
@round = 2
review_metrics(@round, @reviewee.id)
expect(@min).to eq '5%'
expect(@max).to eq '7%'
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 25.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
it 'should return minimum maximum and average score for round 1' do
@round = 1
review_metrics(@round, @reviewee.id)
expect(@min).to eq '2%'
expect(@max).to eq '4%'
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 25.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Use normalcase for variable numbers. Open
@reviewer_1 = create(:participant, review_grade: nil)
- Read upRead up
- Exclude checks
This cop makes sure that all numbered variables use the configured style, snakecase, normalcase or noninteger, for their numbering.
Example: EnforcedStyle: snake_case
# bad
variable1 = 1
# good
variable_1 = 1
Example: EnforcedStyle: normalcase (default)
# bad
variable_1 = 1
# good
variable1 = 1
Example: EnforcedStyle: non_integer
# bad
variable1 = 1
variable_1 = 1
# good
variableone = 1
variable_one = 1
Use normalcase for variable numbers. Open
@response_map_3 = create(:review_response_map, reviewer: @reviewer_3, reviewee: @reviewee)
- Read upRead up
- Exclude checks
This cop makes sure that all numbered variables use the configured style, snakecase, normalcase or noninteger, for their numbering.
Example: EnforcedStyle: snake_case
# bad
variable1 = 1
# good
variable_1 = 1
Example: EnforcedStyle: normalcase (default)
# bad
variable_1 = 1
# good
variable1 = 1
Example: EnforcedStyle: non_integer
# bad
variable1 = 1
variable_1 = 1
# good
variableone = 1
variable_one = 1
Use normalcase for variable numbers. Open
@response_1 = create(:response, response_map: @response_map_1, additional_comment: 'good')
- Read upRead up
- Exclude checks
This cop makes sure that all numbered variables use the configured style, snakecase, normalcase or noninteger, for their numbering.
Example: EnforcedStyle: snake_case
# bad
variable1 = 1
# good
variable_1 = 1
Example: EnforcedStyle: normalcase (default)
# bad
variable_1 = 1
# good
variable1 = 1
Example: EnforcedStyle: non_integer
# bad
variable1 = 1
variable_1 = 1
# good
variableone = 1
variable_one = 1
Use normalcase for variable numbers. Open
@reviewer_2 = create(:participant, review_grade: nil)
- Read upRead up
- Exclude checks
This cop makes sure that all numbered variables use the configured style, snakecase, normalcase or noninteger, for their numbering.
Example: EnforcedStyle: snake_case
# bad
variable1 = 1
# good
variable_1 = 1
Example: EnforcedStyle: normalcase (default)
# bad
variable_1 = 1
# good
variable1 = 1
Example: EnforcedStyle: non_integer
# bad
variable1 = 1
variable_1 = 1
# good
variableone = 1
variable_one = 1
Use normalcase for variable numbers. Open
@response_map_1 = create(:review_response_map, reviewer: @reviewer_1, reviewee: @reviewee)
- Read upRead up
- Exclude checks
This cop makes sure that all numbered variables use the configured style, snakecase, normalcase or noninteger, for their numbering.
Example: EnforcedStyle: snake_case
# bad
variable1 = 1
# good
variable_1 = 1
Example: EnforcedStyle: normalcase (default)
# bad
variable_1 = 1
# good
variable1 = 1
Example: EnforcedStyle: non_integer
# bad
variable1 = 1
variable_1 = 1
# good
variableone = 1
variable_one = 1
Use normalcase for variable numbers. Open
@reviewer_3 = create(:participant, review_grade: nil)
- Read upRead up
- Exclude checks
This cop makes sure that all numbered variables use the configured style, snakecase, normalcase or noninteger, for their numbering.
Example: EnforcedStyle: snake_case
# bad
variable1 = 1
# good
variable_1 = 1
Example: EnforcedStyle: normalcase (default)
# bad
variable_1 = 1
# good
variable1 = 1
Example: EnforcedStyle: non_integer
# bad
variable1 = 1
variable_1 = 1
# good
variableone = 1
variable_one = 1
Use normalcase for variable numbers. Open
@response_map_2 = create(:review_response_map, reviewer: @reviewer_2, reviewee: @reviewee)
- Read upRead up
- Exclude checks
This cop makes sure that all numbered variables use the configured style, snakecase, normalcase or noninteger, for their numbering.
Example: EnforcedStyle: snake_case
# bad
variable1 = 1
# good
variable_1 = 1
Example: EnforcedStyle: normalcase (default)
# bad
variable_1 = 1
# good
variable1 = 1
Example: EnforcedStyle: non_integer
# bad
variable1 = 1
variable_1 = 1
# good
variableone = 1
variable_one = 1
Prefer Date or Time over DateTime. Open
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee_with_assignment.id, operation: 'Submit Hyperlink', content: 'https://wiki.archlinux.org/', created_at: DateTime.now.in_time_zone - 7.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'random link', created_at: DateTime.now.in_time_zone - 7.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 1, due_at: DateTime.now.in_time_zone - 5.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'https://wiki.archlinux.org/', created_at: DateTime.now.in_time_zone - 7.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 2, due_at: DateTime.now.in_time_zone - 5.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'https://wiki.archlinux.org/123', created_at: DateTime.now.in_time_zone - 7.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 1, due_at: DateTime.now.in_time_zone - 5.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 1, due_at: DateTime.now.in_time_zone - 5.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Use normalcase for variable numbers. Open
css_class_6 = helper.get_css_style_for_calibration_report(6)
- Read upRead up
- Exclude checks
This cop makes sure that all numbered variables use the configured style, snakecase, normalcase or noninteger, for their numbering.
Example: EnforcedStyle: snake_case
# bad
variable1 = 1
# good
variable_1 = 1
Example: EnforcedStyle: normalcase (default)
# bad
variable_1 = 1
# good
variable1 = 1
Example: EnforcedStyle: non_integer
# bad
variable1 = 1
variable_1 = 1
# good
variableone = 1
variable_one = 1
Use normalcase for variable numbers. Open
@response_2 = create(:response, response_map: @response_map_2, additional_comment: 'clear code')
- Read upRead up
- Exclude checks
This cop makes sure that all numbered variables use the configured style, snakecase, normalcase or noninteger, for their numbering.
Example: EnforcedStyle: snake_case
# bad
variable1 = 1
# good
variable_1 = 1
Example: EnforcedStyle: normalcase (default)
# bad
variable_1 = 1
# good
variable1 = 1
Example: EnforcedStyle: non_integer
# bad
variable1 = 1
variable_1 = 1
# good
variableone = 1
variable_one = 1
Prefer Date or Time over DateTime. Open
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'https://wiki.archlinux.org/', created_at: DateTime.now.in_time_zone - 12.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Use normalcase for variable numbers. Open
@response_1 = create(:response, response_map: @response_map_1, round: 1)
- Read upRead up
- Exclude checks
This cop makes sure that all numbered variables use the configured style, snakecase, normalcase or noninteger, for their numbering.
Example: EnforcedStyle: snake_case
# bad
variable1 = 1
# good
variable_1 = 1
Example: EnforcedStyle: normalcase (default)
# bad
variable_1 = 1
# good
variable1 = 1
Example: EnforcedStyle: non_integer
# bad
variable1 = 1
variable_1 = 1
# good
variableone = 1
variable_one = 1
Prefer Date or Time over DateTime. Open
@assignment = create(:assignment, created_at: DateTime.now.in_time_zone - 13.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Use normalcase for variable numbers. Open
@response_2 = create(:response, response_map: @response_map_2, round: 2)
- Read upRead up
- Exclude checks
This cop makes sure that all numbered variables use the configured style, snakecase, normalcase or noninteger, for their numbering.
Example: EnforcedStyle: snake_case
# bad
variable1 = 1
# good
variable_1 = 1
Example: EnforcedStyle: normalcase (default)
# bad
variable_1 = 1
# good
variable1 = 1
Example: EnforcedStyle: non_integer
# bad
variable1 = 1
variable_1 = 1
# good
variableone = 1
variable_one = 1
Prefer Date or Time over DateTime. Open
link_updated_at = DateTime.now.in_time_zone + 7.day
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 1, due_at: DateTime.now.in_time_zone - 5.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Use normalcase for variable numbers. Open
@response_map_2 = create(:review_response_map, reviewer: @reviewer)
- Read upRead up
- Exclude checks
This cop makes sure that all numbered variables use the configured style, snakecase, normalcase or noninteger, for their numbering.
Example: EnforcedStyle: snake_case
# bad
variable1 = 1
# good
variable_1 = 1
Example: EnforcedStyle: normalcase (default)
# bad
variable_1 = 1
# good
variable1 = 1
Example: EnforcedStyle: non_integer
# bad
variable1 = 1
variable_1 = 1
# good
variableone = 1
variable_one = 1
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 2, due_at: DateTime.now.in_time_zone - 5.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'random link', created_at: DateTime.now.in_time_zone - 7.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'https://wiki.archlinux.org/', created_at: DateTime.now.in_time_zone - 12.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 2, due_at: DateTime.now.in_time_zone + 8.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 2, due_at: DateTime.now.in_time_zone - 2.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 1, due_at: DateTime.now.in_time_zone - 5.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 2, due_at: DateTime.now.in_time_zone - 2.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 1, due_at: DateTime.now.in_time_zone - 10.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 1, due_at: DateTime.now.in_time_zone - 10.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'https://wiki.archlinux.org/123', created_at: DateTime.now.in_time_zone - 4.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'https://wiki.archlinux.org/', created_at: DateTime.now.in_time_zone + 7.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 2, due_at: DateTime.now.in_time_zone + 6.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 1, due_at: DateTime.now.in_time_zone - 5.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'random link', created_at: DateTime.now.in_time_zone - 2.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 2, due_at: DateTime.now.in_time_zone + 6.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 1, due_at: DateTime.now.in_time_zone - 5.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 2, due_at: DateTime.now.in_time_zone + 6.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'https://wiki.archlinux.org/', created_at: DateTime.now.in_time_zone + 7.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Use normalcase for variable numbers. Open
@response_map_1 = create(:review_response_map, reviewer: @reviewer)
- Read upRead up
- Exclude checks
This cop makes sure that all numbered variables use the configured style, snakecase, normalcase or noninteger, for their numbering.
Example: EnforcedStyle: snake_case
# bad
variable1 = 1
# good
variable_1 = 1
Example: EnforcedStyle: normalcase (default)
# bad
variable_1 = 1
# good
variable1 = 1
Example: EnforcedStyle: non_integer
# bad
variable1 = 1
variable_1 = 1
# good
variableone = 1
variable_one = 1
Prefer Date or Time over DateTime. Open
@assignment = create(:assignment, created_at: DateTime.now.in_time_zone - 13.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'random link', created_at: DateTime.now.in_time_zone - 7.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 1, due_at: DateTime.now.in_time_zone - 10.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Use normalcase for variable numbers. Open
@response_3 = create(:response, response_map: @response_map_3, additional_comment: 'nice bro')
- Read upRead up
- Exclude checks
This cop makes sure that all numbered variables use the configured style, snakecase, normalcase or noninteger, for their numbering.
Example: EnforcedStyle: snake_case
# bad
variable1 = 1
# good
variable_1 = 1
Example: EnforcedStyle: normalcase (default)
# bad
variable_1 = 1
# good
variable1 = 1
Example: EnforcedStyle: non_integer
# bad
variable1 = 1
variable_1 = 1
# good
variableone = 1
variable_one = 1
Use normalcase for variable numbers. Open
feedback_response_map_1 = FeedbackResponseMap.create(reviewed_object_id: @response_1.id, reviewer_id: @reviewer.id)
- Read upRead up
- Exclude checks
This cop makes sure that all numbered variables use the configured style, snakecase, normalcase or noninteger, for their numbering.
Example: EnforcedStyle: snake_case
# bad
variable1 = 1
# good
variable_1 = 1
Example: EnforcedStyle: normalcase (default)
# bad
variable_1 = 1
# good
variable1 = 1
Example: EnforcedStyle: non_integer
# bad
variable1 = 1
variable_1 = 1
# good
variableone = 1
variable_one = 1
Prefer Date or Time over DateTime. Open
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'https://wiki.archlinux.org/', created_at: DateTime.now.in_time_zone - 6.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'random link', created_at: DateTime.now.in_time_zone + 4.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Use normalcase for variable numbers. Open
@response_2 = create(:response, response_map: @response_map_2, additional_comment: 'Good job with clear code')
- Read upRead up
- Exclude checks
This cop makes sure that all numbered variables use the configured style, snakecase, normalcase or noninteger, for their numbering.
Example: EnforcedStyle: snake_case
# bad
variable1 = 1
# good
variable_1 = 1
Example: EnforcedStyle: normalcase (default)
# bad
variable_1 = 1
# good
variable1 = 1
Example: EnforcedStyle: non_integer
# bad
variable1 = 1
variable_1 = 1
# good
variableone = 1
variable_one = 1
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 1, due_at: DateTime.now.in_time_zone - 5.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Use normalcase for variable numbers. Open
feedback_response_map_2 = FeedbackResponseMap.create(reviewed_object_id: @response_2.id, reviewer_id: @reviewer.id)
- Read upRead up
- Exclude checks
This cop makes sure that all numbered variables use the configured style, snakecase, normalcase or noninteger, for their numbering.
Example: EnforcedStyle: snake_case
# bad
variable1 = 1
# good
variable_1 = 1
Example: EnforcedStyle: normalcase (default)
# bad
variable_1 = 1
# good
variable1 = 1
Example: EnforcedStyle: non_integer
# bad
variable1 = 1
variable_1 = 1
# good
variableone = 1
variable_one = 1
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 2, due_at: DateTime.now.in_time_zone + 6.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Use normalcase for variable numbers. Open
@response_1 = create(:response, response_map: @response_map_1, round: 1)
- Read upRead up
- Exclude checks
This cop makes sure that all numbered variables use the configured style, snakecase, normalcase or noninteger, for their numbering.
Example: EnforcedStyle: snake_case
# bad
variable1 = 1
# good
variable_1 = 1
Example: EnforcedStyle: normalcase (default)
# bad
variable_1 = 1
# good
variable1 = 1
Example: EnforcedStyle: non_integer
# bad
variable1 = 1
variable_1 = 1
# good
variableone = 1
variable_one = 1
Prefer Date or Time over DateTime. Open
assignment = create(:assignment, name: 'assignment', created_at: DateTime.now.in_time_zone - 13.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Use normalcase for variable numbers. Open
@response_2 = create(:response, response_map: @response_map_2, round: 2)
- Read upRead up
- Exclude checks
This cop makes sure that all numbered variables use the configured style, snakecase, normalcase or noninteger, for their numbering.
Example: EnforcedStyle: snake_case
# bad
variable1 = 1
# good
variable_1 = 1
Example: EnforcedStyle: normalcase (default)
# bad
variable_1 = 1
# good
variable1 = 1
Example: EnforcedStyle: non_integer
# bad
variable1 = 1
variable_1 = 1
# good
variableone = 1
variable_one = 1
Prefer Date or Time over DateTime. Open
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'https://wiki.archlinux.org/', created_at: DateTime.now.in_time_zone - 2.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'https://wiki.archlinux.org/123', created_at: DateTime.now.in_time_zone - 6.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Use normalcase for variable numbers. Open
css_class_1 = helper.get_css_style_for_calibration_report(-1)
- Read upRead up
- Exclude checks
This cop makes sure that all numbered variables use the configured style, snakecase, normalcase or noninteger, for their numbering.
Example: EnforcedStyle: snake_case
# bad
variable1 = 1
# good
variable_1 = 1
Example: EnforcedStyle: normalcase (default)
# bad
variable_1 = 1
# good
variable1 = 1
Example: EnforcedStyle: non_integer
# bad
variable1 = 1
variable_1 = 1
# good
variableone = 1
variable_one = 1
Prefer Date or Time over DateTime. Open
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'https://wiki.archlinux.org/', created_at: DateTime.now.in_time_zone + 5.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, round: 1, due_at: DateTime.now.in_time_zone + 5.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'random link', created_at: DateTime.now.in_time_zone - 3.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 2, due_at: DateTime.now.in_time_zone + 4.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 1, due_at: DateTime.now.in_time_zone - 5.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, round: 2, due_at: DateTime.now.in_time_zone + 10.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 1, due_at: DateTime.now.in_time_zone - 5.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
@assignment = create(:assignment, created_at: DateTime.now.in_time_zone - 13.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 1, due_at: DateTime.now.in_time_zone + 2.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
@assignment = create(:assignment, name: 'assignment', created_at: DateTime.now.in_time_zone - 13.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'https://wiki.archlinux.org/', created_at: DateTime.now.in_time_zone - 3.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'https://wiki.archlinux.org/', created_at: DateTime.now.in_time_zone + 3.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'https://wiki.archlinux.org/', created_at: DateTime.now.in_time_zone + 4.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
@assignment = create(:assignment, created_at: DateTime.now.in_time_zone - 13.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Use normalcase for variable numbers. Open
@response_3 = create(:response, response_map: @response_map_3, round: 3)
- Read upRead up
- Exclude checks
This cop makes sure that all numbered variables use the configured style, snakecase, normalcase or noninteger, for their numbering.
Example: EnforcedStyle: snake_case
# bad
variable1 = 1
# good
variable_1 = 1
Example: EnforcedStyle: normalcase (default)
# bad
variable_1 = 1
# good
variable1 = 1
Example: EnforcedStyle: non_integer
# bad
variable1 = 1
variable_1 = 1
# good
variableone = 1
variable_one = 1
Use normalcase for variable numbers. Open
@response_map_3 = create(:review_response_map, reviewer: @reviewer)
- Read upRead up
- Exclude checks
This cop makes sure that all numbered variables use the configured style, snakecase, normalcase or noninteger, for their numbering.
Example: EnforcedStyle: snake_case
# bad
variable1 = 1
# good
variable_1 = 1
Example: EnforcedStyle: normalcase (default)
# bad
variable_1 = 1
# good
variable1 = 1
Example: EnforcedStyle: non_integer
# bad
variable1 = 1
variable_1 = 1
# good
variableone = 1
variable_one = 1
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 2, due_at: DateTime.now.in_time_zone + 6.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 1, due_at: DateTime.now.in_time_zone - 10.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 2, due_at: DateTime.now.in_time_zone - 5.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Use normalcase for variable numbers. Open
@response_1 = create(:response, response_map: @response_map_1, additional_comment: 'good job')
- Read upRead up
- Exclude checks
This cop makes sure that all numbered variables use the configured style, snakecase, normalcase or noninteger, for their numbering.
Example: EnforcedStyle: snake_case
# bad
variable1 = 1
# good
variable_1 = 1
Example: EnforcedStyle: normalcase (default)
# bad
variable_1 = 1
# good
variable1 = 1
Example: EnforcedStyle: non_integer
# bad
variable1 = 1
variable_1 = 1
# good
variableone = 1
variable_one = 1
Use normalcase for variable numbers. Open
@response_map_3 = create(:review_response_map, reviewer: @reviewer)
- Read upRead up
- Exclude checks
This cop makes sure that all numbered variables use the configured style, snakecase, normalcase or noninteger, for their numbering.
Example: EnforcedStyle: snake_case
# bad
variable1 = 1
# good
variable_1 = 1
Example: EnforcedStyle: normalcase (default)
# bad
variable_1 = 1
# good
variable1 = 1
Example: EnforcedStyle: non_integer
# bad
variable1 = 1
variable_1 = 1
# good
variableone = 1
variable_one = 1
Prefer Date or Time over DateTime. Open
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'random link', created_at: DateTime.now.in_time_zone - 1.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'https://wiki.archlinux.org/', created_at: DateTime.now.in_time_zone - 4.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 2, due_at: DateTime.now.in_time_zone - 5.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
@assignment = create(:assignment, created_at: DateTime.now.in_time_zone - 13.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'https://google.com/', created_at: DateTime.now.in_time_zone - 7.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 2, due_at: DateTime.now.in_time_zone + 6.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'https://wiki.archlinux.org/', created_at: DateTime.now.in_time_zone + 5.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'https://wiki.archlinux.org/', created_at: DateTime.now.in_time_zone - 7.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
@assignment = create(:assignment, created_at: DateTime.now.in_time_zone - 13.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 1, due_at: DateTime.now.in_time_zone - 5.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 1, due_at: DateTime.now.in_time_zone - 5.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
@assignment = create(:assignment, name: 'assignment', created_at: DateTime.now.in_time_zone - 13.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'https://wiki.archlinux.org/', created_at: DateTime.now.in_time_zone - 8.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 2, due_at: DateTime.now.in_time_zone + 6.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
link_updated_at = DateTime.now.in_time_zone + 1.day
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'https://wiki.archlinux.org/', created_at: DateTime.now.in_time_zone + 1.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Use normalcase for variable numbers. Open
@response_1 = create(:response, response_map: @response_map_1, additional_comment: 'good job')
- Read upRead up
- Exclude checks
This cop makes sure that all numbered variables use the configured style, snakecase, normalcase or noninteger, for their numbering.
Example: EnforcedStyle: snake_case
# bad
variable1 = 1
# good
variable_1 = 1
Example: EnforcedStyle: normalcase (default)
# bad
variable_1 = 1
# good
variable1 = 1
Example: EnforcedStyle: non_integer
# bad
variable1 = 1
variable_1 = 1
# good
variableone = 1
variable_one = 1
Use normalcase for variable numbers. Open
css_class_0 = helper.get_css_style_for_calibration_report(0)
- Read upRead up
- Exclude checks
This cop makes sure that all numbered variables use the configured style, snakecase, normalcase or noninteger, for their numbering.
Example: EnforcedStyle: snake_case
# bad
variable1 = 1
# good
variable_1 = 1
Example: EnforcedStyle: normalcase (default)
# bad
variable_1 = 1
# good
variable1 = 1
Example: EnforcedStyle: non_integer
# bad
variable1 = 1
variable_1 = 1
# good
variableone = 1
variable_one = 1
Prefer Date or Time over DateTime. Open
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'random link', created_at: DateTime.now.in_time_zone - 3.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'https://wiki.archlinux.org/', created_at: DateTime.now.in_time_zone - 7.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'https://wiki.archlinux.org/', created_at: DateTime.now.in_time_zone - 1.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'https://wiki.archlinux.org/', created_at: DateTime.now.in_time_zone - 11.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 2, due_at: DateTime.now.in_time_zone - 5.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:submission_record, assignment_id: @assignment.id, team_id: @reviewee.id, operation: 'Submit Hyperlink', content: 'https://wiki.archlinux.org/', created_at: DateTime.now.in_time_zone - 7.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
@assignment = create(:assignment, created_at: DateTime.now.in_time_zone - 13.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Use normalcase for variable numbers. Open
@response_3 = create(:response, response_map: @response_map_3, additional_comment: 'clear code')
- Read upRead up
- Exclude checks
This cop makes sure that all numbered variables use the configured style, snakecase, normalcase or noninteger, for their numbering.
Example: EnforcedStyle: snake_case
# bad
variable1 = 1
# good
variable_1 = 1
Example: EnforcedStyle: normalcase (default)
# bad
variable_1 = 1
# good
variable1 = 1
Example: EnforcedStyle: non_integer
# bad
variable1 = 1
variable_1 = 1
# good
variableone = 1
variable_one = 1
Use normalcase for variable numbers. Open
@response_map_1 = create(:review_response_map, reviewer: @reviewer)
- Read upRead up
- Exclude checks
This cop makes sure that all numbered variables use the configured style, snakecase, normalcase or noninteger, for their numbering.
Example: EnforcedStyle: snake_case
# bad
variable1 = 1
# good
variable_1 = 1
Example: EnforcedStyle: normalcase (default)
# bad
variable_1 = 1
# good
variable1 = 1
Example: EnforcedStyle: non_integer
# bad
variable1 = 1
variable_1 = 1
# good
variableone = 1
variable_one = 1
Use normalcase for variable numbers. Open
@response_3 = create(:response, response_map: @response_map_3, round: 3)
- Read upRead up
- Exclude checks
This cop makes sure that all numbered variables use the configured style, snakecase, normalcase or noninteger, for their numbering.
Example: EnforcedStyle: snake_case
# bad
variable1 = 1
# good
variable_1 = 1
Example: EnforcedStyle: normalcase (default)
# bad
variable_1 = 1
# good
variable1 = 1
Example: EnforcedStyle: non_integer
# bad
variable1 = 1
variable_1 = 1
# good
variableone = 1
variable_one = 1
Prefer Date or Time over DateTime. Open
@assignment = create(:assignment, name: 'assignment', created_at: DateTime.now.in_time_zone - 13.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Use normalcase for variable numbers. Open
@response_2 = create(:response, response_map: @response_map_2, additional_comment: 'Good job with clear code')
- Read upRead up
- Exclude checks
This cop makes sure that all numbered variables use the configured style, snakecase, normalcase or noninteger, for their numbering.
Example: EnforcedStyle: snake_case
# bad
variable1 = 1
# good
variable_1 = 1
Example: EnforcedStyle: normalcase (default)
# bad
variable_1 = 1
# good
variable1 = 1
Example: EnforcedStyle: non_integer
# bad
variable1 = 1
variable_1 = 1
# good
variableone = 1
variable_one = 1
Use normalcase for variable numbers. Open
@response_3 = create(:response, response_map: @response_map_3, additional_comment: 'goodclear code')
- Read upRead up
- Exclude checks
This cop makes sure that all numbered variables use the configured style, snakecase, normalcase or noninteger, for their numbering.
Example: EnforcedStyle: snake_case
# bad
variable1 = 1
# good
variable_1 = 1
Example: EnforcedStyle: normalcase (default)
# bad
variable_1 = 1
# good
variable1 = 1
Example: EnforcedStyle: non_integer
# bad
variable1 = 1
variable_1 = 1
# good
variableone = 1
variable_one = 1
Use normalcase for variable numbers. Open
@response_map_2 = create(:review_response_map, reviewer: @reviewer)
- Read upRead up
- Exclude checks
This cop makes sure that all numbered variables use the configured style, snakecase, normalcase or noninteger, for their numbering.
Example: EnforcedStyle: snake_case
# bad
variable1 = 1
# good
variable_1 = 1
Example: EnforcedStyle: normalcase (default)
# bad
variable_1 = 1
# good
variable1 = 1
Example: EnforcedStyle: non_integer
# bad
variable1 = 1
variable_1 = 1
# good
variableone = 1
variable_one = 1
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 1, due_at: DateTime.now.in_time_zone + 3.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 2, due_at: DateTime.now.in_time_zone - 5.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
@assignment = create(:assignment, created_at: DateTime.now.in_time_zone - 13.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 2, due_at: DateTime.now.in_time_zone + 6.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 2, due_at: DateTime.now.in_time_zone + 6.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 2, due_at: DateTime.now.in_time_zone + 6.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 2, due_at: DateTime.now.in_time_zone + 6.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 1, due_at: DateTime.now.in_time_zone - 10.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)
Prefer Date or Time over DateTime. Open
create(:assignment_due_date, assignment: @assignment, parent_id: @assignment.id, round: 1, due_at: DateTime.now.in_time_zone - 10.day)
- Read upRead up
- Exclude checks
This cop checks for uses of DateTime
that should be replaced by
Date
or Time
.
Example:
# bad - uses `DateTime` for current time
DateTime.now
# good - uses `Time` for current time
Time.now
# bad - uses `DateTime` for modern date
DateTime.iso8601('2016-06-29')
# good - uses `Date` for modern date
Date.iso8601('2016-06-29')
# good - uses `DateTime` with start argument for historical date
DateTime.iso8601('1751-04-23', Date::ENGLAND)