expertiza/expertiza

This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.

This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 31.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 31.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 31.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

This cop checks for every useless assignment to local variable in every scope. The basic idea for this cop was from the warning of ruby -cw:

assigned but unused variable - foo

Currently this cop has advanced logic that detects unreferenced reassignments and properly handles varied cases such as branch, loop, rescue, ensure, etc.

Example:

# bad

def some_method
  some_var = 1
  do_something
end

Example:

# good

def some_method
  some_var = 1
  do_something(some_var)
end

This cop checks for every useless assignment to local variable in every scope. The basic idea for this cop was from the warning of ruby -cw:

assigned but unused variable - foo

Currently this cop has advanced logic that detects unreferenced reassignments and properly handles varied cases such as branch, loop, rescue, ensure, etc.

Example:

# bad

def some_method
  some_var = 1
  do_something
end

Example:

# good

def some_method
  some_var = 1
  do_something(some_var)
end

This cop checks for every useless assignment to local variable in every scope. The basic idea for this cop was from the warning of ruby -cw:

assigned but unused variable - foo

Currently this cop has advanced logic that detects unreferenced reassignments and properly handles varied cases such as branch, loop, rescue, ensure, etc.

Example:

# bad

def some_method
  some_var = 1
  do_something
end

Example:

# good

def some_method
  some_var = 1
  do_something(some_var)
end

This cop checks for every useless assignment to local variable in every scope. The basic idea for this cop was from the warning of ruby -cw:

assigned but unused variable - foo

Currently this cop has advanced logic that detects unreferenced reassignments and properly handles varied cases such as branch, loop, rescue, ensure, etc.

Example:

# bad

def some_method
  some_var = 1
  do_something
end

Example:

# good

def some_method
  some_var = 1
  do_something(some_var)
end

This cop checks for every useless assignment to local variable in every scope. The basic idea for this cop was from the warning of ruby -cw:

assigned but unused variable - foo

Currently this cop has advanced logic that detects unreferenced reassignments and properly handles varied cases such as branch, loop, rescue, ensure, etc.

Example:

# bad

def some_method
  some_var = 1
  do_something
end

Example:

# good

def some_method
  some_var = 1
  do_something(some_var)
end

This cop checks for every useless assignment to local variable in every scope. The basic idea for this cop was from the warning of ruby -cw:

assigned but unused variable - foo

Currently this cop has advanced logic that detects unreferenced reassignments and properly handles varied cases such as branch, loop, rescue, ensure, etc.

Example:

# bad

def some_method
  some_var = 1
  do_something
end

Example:

# good

def some_method
  some_var = 1
  do_something(some_var)
end

This cop checks for every useless assignment to local variable in every scope. The basic idea for this cop was from the warning of ruby -cw:

assigned but unused variable - foo

Currently this cop has advanced logic that detects unreferenced reassignments and properly handles varied cases such as branch, loop, rescue, ensure, etc.

Example:

# bad

def some_method
  some_var = 1
  do_something
end

Example:

# good

def some_method
  some_var = 1
  do_something(some_var)
end

This cop checks for every useless assignment to local variable in every scope. The basic idea for this cop was from the warning of ruby -cw:

assigned but unused variable - foo

Currently this cop has advanced logic that detects unreferenced reassignments and properly handles varied cases such as branch, loop, rescue, ensure, etc.

Example:

# bad

def some_method
  some_var = 1
  do_something
end

Example:

# good

def some_method
  some_var = 1
  do_something(some_var)
end

This cop checks for every useless assignment to local variable in every scope. The basic idea for this cop was from the warning of ruby -cw:

assigned but unused variable - foo

Currently this cop has advanced logic that detects unreferenced reassignments and properly handles varied cases such as branch, loop, rescue, ensure, etc.

Example:

# bad

def some_method
  some_var = 1
  do_something
end

Example:

# good

def some_method
  some_var = 1
  do_something(some_var)
end

This cop checks for every useless assignment to local variable in every scope. The basic idea for this cop was from the warning of ruby -cw:

assigned but unused variable - foo

Currently this cop has advanced logic that detects unreferenced reassignments and properly handles varied cases such as branch, loop, rescue, ensure, etc.

Example:

# bad

def some_method
  some_var = 1
  do_something
end

Example:

# good

def some_method
  some_var = 1
  do_something(some_var)
end

This cop checks for every useless assignment to local variable in every scope. The basic idea for this cop was from the warning of ruby -cw:

assigned but unused variable - foo

Currently this cop has advanced logic that detects unreferenced reassignments and properly handles varied cases such as branch, loop, rescue, ensure, etc.

Example:

# bad

def some_method
  some_var = 1
  do_something
end

Example:

# good

def some_method
  some_var = 1
  do_something(some_var)
end

This cop checks for every useless assignment to local variable in every scope. The basic idea for this cop was from the warning of ruby -cw:

assigned but unused variable - foo

Currently this cop has advanced logic that detects unreferenced reassignments and properly handles varied cases such as branch, loop, rescue, ensure, etc.

Example:

# bad

def some_method
  some_var = 1
  do_something
end

Example:

# good

def some_method
  some_var = 1
  do_something(some_var)
end

This cop checks for every useless assignment to local variable in every scope. The basic idea for this cop was from the warning of ruby -cw:

assigned but unused variable - foo

Currently this cop has advanced logic that detects unreferenced reassignments and properly handles varied cases such as branch, loop, rescue, ensure, etc.

Example:

# bad

def some_method
  some_var = 1
  do_something
end

Example:

# good

def some_method
  some_var = 1
  do_something(some_var)
end

This cop checks for every useless assignment to local variable in every scope. The basic idea for this cop was from the warning of ruby -cw:

assigned but unused variable - foo

Currently this cop has advanced logic that detects unreferenced reassignments and properly handles varied cases such as branch, loop, rescue, ensure, etc.

Example:

# bad

def some_method
  some_var = 1
  do_something
end

Example:

# good

def some_method
  some_var = 1
  do_something(some_var)
end

This cop checks for every useless assignment to local variable in every scope. The basic idea for this cop was from the warning of ruby -cw:

assigned but unused variable - foo

Currently this cop has advanced logic that detects unreferenced reassignments and properly handles varied cases such as branch, loop, rescue, ensure, etc.

Example:

# bad

def some_method
  some_var = 1
  do_something
end

Example:

# good

def some_method
  some_var = 1
  do_something(some_var)
end

This cop checks for every useless assignment to local variable in every scope. The basic idea for this cop was from the warning of ruby -cw:

assigned but unused variable - foo

Currently this cop has advanced logic that detects unreferenced reassignments and properly handles varied cases such as branch, loop, rescue, ensure, etc.

Example:

# bad

def some_method
  some_var = 1
  do_something
end

Example:

# good

def some_method
  some_var = 1
  do_something(some_var)
end

This cop checks for every useless assignment to local variable in every scope. The basic idea for this cop was from the warning of ruby -cw:

assigned but unused variable - foo

Currently this cop has advanced logic that detects unreferenced reassignments and properly handles varied cases such as branch, loop, rescue, ensure, etc.

Example:

# bad

def some_method
  some_var = 1
  do_something
end

Example:

# good

def some_method
  some_var = 1
  do_something(some_var)
end

This cop checks for every useless assignment to local variable in every scope. The basic idea for this cop was from the warning of ruby -cw:

assigned but unused variable - foo

Currently this cop has advanced logic that detects unreferenced reassignments and properly handles varied cases such as branch, loop, rescue, ensure, etc.

Example:

# bad

def some_method
  some_var = 1
  do_something
end

Example:

# good

def some_method
  some_var = 1
  do_something(some_var)
end

This cop checks for every useless assignment to local variable in every scope. The basic idea for this cop was from the warning of ruby -cw:

assigned but unused variable - foo

Currently this cop has advanced logic that detects unreferenced reassignments and properly handles varied cases such as branch, loop, rescue, ensure, etc.

Example:

# bad

def some_method
  some_var = 1
  do_something
end

Example:

# good

def some_method
  some_var = 1
  do_something(some_var)
end

This cop checks for every useless assignment to local variable in every scope. The basic idea for this cop was from the warning of ruby -cw:

assigned but unused variable - foo

Currently this cop has advanced logic that detects unreferenced reassignments and properly handles varied cases such as branch, loop, rescue, ensure, etc.

Example:

# bad

def some_method
  some_var = 1
  do_something
end

Example:

# good

def some_method
  some_var = 1
  do_something(some_var)
end