File framework-preset-angular-cli.test.ts
has 754 lines of code (exceeds 250 allowed). Consider refactoring. Open
import path from 'path';
import { Configuration } from 'webpack';
import { logger } from '@storybook/node-logger';
import { normalize, getSystemPath } from '@angular-devkit/core';
import TsconfigPathsPlugin from 'tsconfig-paths-webpack-plugin';
Similar blocks of code found in 2 locations. Consider refactoring. Open
describe('when is a nx with angular.json', () => {
beforeEach(() => {
initMockWorkspace('with-nx');
});
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 533.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
describe('when angular.json have "options.styles" config', () => {
beforeEach(() => {
initMockWorkspace('with-options-styles');
});
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 533.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
it('should set webpack "module.rules"', async () => {
const baseWebpackConfig = newWebpackConfiguration();
const webpackFinalConfig = await webpackFinal(baseWebpackConfig, options);
expect(webpackFinalConfig.module.rules).toEqual([
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 172.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
it('should set webpack "module.rules"', async () => {
const baseWebpackConfig = newWebpackConfiguration();
const webpackFinalConfig = await webpackFinal(baseWebpackConfig, options);
expect(webpackFinalConfig.module.rules).toEqual([
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 172.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 4 locations. Consider refactoring. Open
describe('when angular.json have empty projects entry', () => {
beforeEach(() => {
initMockWorkspace('empty-projects-entry');
});
it('should return webpack base config and display log error', async () => {
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 141.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 4 locations. Consider refactoring. Open
describe("when angular.json haven't projects entry", () => {
beforeEach(() => {
initMockWorkspace('without-projects-entry');
});
it('should return webpack base config and display log error', async () => {
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 141.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 4 locations. Consider refactoring. Open
describe('when angular.json have projects without architect.build', () => {
beforeEach(() => {
initMockWorkspace('without-architect-build');
});
it('should return webpack base config and display log error', async () => {
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 141.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 4 locations. Consider refactoring. Open
describe('when angular.json does not have a compatible project', () => {
beforeEach(() => {
initMockWorkspace('without-compatible-projects');
});
it('should return webpack base config and display log error', async () => {
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 141.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
describe('when angular.json have the target without "configurations" section', () => {
beforeEach(() => {
options = {
angularBrowserTarget: 'no-confs-project:target-build:target-conf',
} as PresetOptions;
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 113.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
describe('when angular.json have the target without required configuration', () => {
beforeEach(() => {
options = {
angularBrowserTarget: 'no-target-conf-project:target-build:target-conf',
} as PresetOptions;
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 113.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 5 locations. Consider refactoring. Open
it('should log', async () => {
const baseWebpackConfig = newWebpackConfiguration();
await webpackFinal(baseWebpackConfig, options);
expect(logger.info).toHaveBeenCalledTimes(3);
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 112.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 5 locations. Consider refactoring. Open
it('should log', async () => {
const baseWebpackConfig = newWebpackConfiguration();
await webpackFinal(baseWebpackConfig, options);
expect(logger.info).toHaveBeenCalledTimes(3);
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 112.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 5 locations. Consider refactoring. Open
it('should log', async () => {
const baseWebpackConfig = newWebpackConfiguration();
await webpackFinal(baseWebpackConfig, options);
expect(logger.info).toHaveBeenCalledTimes(3);
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 112.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 5 locations. Consider refactoring. Open
it('should log', async () => {
const baseWebpackConfig = newWebpackConfiguration();
await webpackFinal(baseWebpackConfig, options);
expect(logger.info).toHaveBeenCalledTimes(3);
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 112.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 5 locations. Consider refactoring. Open
it('should log', async () => {
const baseWebpackConfig = newWebpackConfiguration();
await webpackFinal(baseWebpackConfig, options);
expect(logger.info).toHaveBeenCalledTimes(3);
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 112.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
describe('when angular.json have projects without architect.build.options', () => {
beforeEach(() => {
initMockWorkspace('without-architect-build-options');
});
it('throws error', async () => {
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 101.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
describe('when angular.json haven\'t "options.tsConfig" config', () => {
beforeEach(() => {
initMockWorkspace('without-tsConfig');
});
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 101.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
resolve: {
...baseWebpackConfig.resolve,
modules: expect.arrayContaining(baseWebpackConfig.resolve.modules),
// the base resolve.plugins are not kept 🤷♂️
plugins: expect.arrayContaining([
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 79.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
resolve: {
...baseWebpackConfig.resolve,
modules: expect.arrayContaining(baseWebpackConfig.resolve.modules),
// the base resolve.plugins are not kept 🤷♂️
plugins: expect.arrayContaining([
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 79.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Type assertion on object literals is forbidden, use a type annotation instead. Open
options = {
angularBrowserTarget: 'target-project:target-build:target-conf',
} as PresetOptions;
- Read upRead up
- Exclude checks
Rule: no-object-literal-type-assertion
Forbids an object literal to appear in a type assertion expression.
Casting to any
or to unknown
is still allowed.
Rationale
Always prefer const x: T = { ... };
to const x = { ... } as T;
.
The type assertion in the latter case is either unnecessary or hides an error.
The compiler will warn for excess properties with this syntax, but not missing required fields.
For example: const x: { foo: number } = {}
will fail to compile, but
const x = {} as { foo: number }
will succeed.
Additionally, the const assertion const x = { foo: 1 } as const
,
introduced in TypeScript 3.4, is considered beneficial and is ignored by this rule.
Notes
- TypeScript Only
Config
One option may be configured:
-
allow-arguments
allows type assertions to be used on object literals inside call expressions.
Examples
"no-object-literal-type-assertion": true
"no-object-literal-type-assertion": true,[object Object]
Schema
{
"type": "object",
"properties": {
"allow-arguments": {
"type": "boolean"
}
},
"additionalProperties": false
}
For more information see this page.
Type assertion on object literals is forbidden, use a type annotation instead. Open
expect.objectContaining({
absoluteBaseUrl: expect.any(String),
} as TsconfigPathsPlugin),
- Read upRead up
- Exclude checks
Rule: no-object-literal-type-assertion
Forbids an object literal to appear in a type assertion expression.
Casting to any
or to unknown
is still allowed.
Rationale
Always prefer const x: T = { ... };
to const x = { ... } as T;
.
The type assertion in the latter case is either unnecessary or hides an error.
The compiler will warn for excess properties with this syntax, but not missing required fields.
For example: const x: { foo: number } = {}
will fail to compile, but
const x = {} as { foo: number }
will succeed.
Additionally, the const assertion const x = { foo: 1 } as const
,
introduced in TypeScript 3.4, is considered beneficial and is ignored by this rule.
Notes
- TypeScript Only
Config
One option may be configured:
-
allow-arguments
allows type assertions to be used on object literals inside call expressions.
Examples
"no-object-literal-type-assertion": true
"no-object-literal-type-assertion": true,[object Object]
Schema
{
"type": "object",
"properties": {
"allow-arguments": {
"type": "boolean"
}
},
"additionalProperties": false
}
For more information see this page.
" should be ' Open
describe("when angular.json haven't projects entry", () => {
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
Type assertion on object literals is forbidden, use a type annotation instead. Open
options = { angularBrowserTarget: 'target-project:target-build' } as PresetOptions;
- Read upRead up
- Exclude checks
Rule: no-object-literal-type-assertion
Forbids an object literal to appear in a type assertion expression.
Casting to any
or to unknown
is still allowed.
Rationale
Always prefer const x: T = { ... };
to const x = { ... } as T;
.
The type assertion in the latter case is either unnecessary or hides an error.
The compiler will warn for excess properties with this syntax, but not missing required fields.
For example: const x: { foo: number } = {}
will fail to compile, but
const x = {} as { foo: number }
will succeed.
Additionally, the const assertion const x = { foo: 1 } as const
,
introduced in TypeScript 3.4, is considered beneficial and is ignored by this rule.
Notes
- TypeScript Only
Config
One option may be configured:
-
allow-arguments
allows type assertions to be used on object literals inside call expressions.
Examples
"no-object-literal-type-assertion": true
"no-object-literal-type-assertion": true,[object Object]
Schema
{
"type": "object",
"properties": {
"allow-arguments": {
"type": "boolean"
}
},
"additionalProperties": false
}
For more information see this page.
Type assertion on object literals is forbidden, use a type annotation instead. Open
options = {
angularBrowserTarget: 'no-target-conf-project:target-build:target-conf',
} as PresetOptions;
- Read upRead up
- Exclude checks
Rule: no-object-literal-type-assertion
Forbids an object literal to appear in a type assertion expression.
Casting to any
or to unknown
is still allowed.
Rationale
Always prefer const x: T = { ... };
to const x = { ... } as T;
.
The type assertion in the latter case is either unnecessary or hides an error.
The compiler will warn for excess properties with this syntax, but not missing required fields.
For example: const x: { foo: number } = {}
will fail to compile, but
const x = {} as { foo: number }
will succeed.
Additionally, the const assertion const x = { foo: 1 } as const
,
introduced in TypeScript 3.4, is considered beneficial and is ignored by this rule.
Notes
- TypeScript Only
Config
One option may be configured:
-
allow-arguments
allows type assertions to be used on object literals inside call expressions.
Examples
"no-object-literal-type-assertion": true
"no-object-literal-type-assertion": true,[object Object]
Schema
{
"type": "object",
"properties": {
"allow-arguments": {
"type": "boolean"
}
},
"additionalProperties": false
}
For more information see this page.
Type assertion on object literals is forbidden, use a type annotation instead. Open
options = {
angularBrowserTarget: 'no-confs-project:target-build:target-conf',
} as PresetOptions;
- Read upRead up
- Exclude checks
Rule: no-object-literal-type-assertion
Forbids an object literal to appear in a type assertion expression.
Casting to any
or to unknown
is still allowed.
Rationale
Always prefer const x: T = { ... };
to const x = { ... } as T;
.
The type assertion in the latter case is either unnecessary or hides an error.
The compiler will warn for excess properties with this syntax, but not missing required fields.
For example: const x: { foo: number } = {}
will fail to compile, but
const x = {} as { foo: number }
will succeed.
Additionally, the const assertion const x = { foo: 1 } as const
,
introduced in TypeScript 3.4, is considered beneficial and is ignored by this rule.
Notes
- TypeScript Only
Config
One option may be configured:
-
allow-arguments
allows type assertions to be used on object literals inside call expressions.
Examples
"no-object-literal-type-assertion": true
"no-object-literal-type-assertion": true,[object Object]
Schema
{
"type": "object",
"properties": {
"allow-arguments": {
"type": "boolean"
}
},
"additionalProperties": false
}
For more information see this page.
Type assertion on object literals is forbidden, use a type annotation instead. Open
expect.objectContaining({
absoluteBaseUrl: expect.any(String),
} as TsconfigPathsPlugin),
- Read upRead up
- Exclude checks
Rule: no-object-literal-type-assertion
Forbids an object literal to appear in a type assertion expression.
Casting to any
or to unknown
is still allowed.
Rationale
Always prefer const x: T = { ... };
to const x = { ... } as T;
.
The type assertion in the latter case is either unnecessary or hides an error.
The compiler will warn for excess properties with this syntax, but not missing required fields.
For example: const x: { foo: number } = {}
will fail to compile, but
const x = {} as { foo: number }
will succeed.
Additionally, the const assertion const x = { foo: 1 } as const
,
introduced in TypeScript 3.4, is considered beneficial and is ignored by this rule.
Notes
- TypeScript Only
Config
One option may be configured:
-
allow-arguments
allows type assertions to be used on object literals inside call expressions.
Examples
"no-object-literal-type-assertion": true
"no-object-literal-type-assertion": true,[object Object]
Schema
{
"type": "object",
"properties": {
"allow-arguments": {
"type": "boolean"
}
},
"additionalProperties": false
}
For more information see this page.
Type assertion on object literals is forbidden, use a type annotation instead. Open
options = {} as PresetOptions;
- Read upRead up
- Exclude checks
Rule: no-object-literal-type-assertion
Forbids an object literal to appear in a type assertion expression.
Casting to any
or to unknown
is still allowed.
Rationale
Always prefer const x: T = { ... };
to const x = { ... } as T;
.
The type assertion in the latter case is either unnecessary or hides an error.
The compiler will warn for excess properties with this syntax, but not missing required fields.
For example: const x: { foo: number } = {}
will fail to compile, but
const x = {} as { foo: number }
will succeed.
Additionally, the const assertion const x = { foo: 1 } as const
,
introduced in TypeScript 3.4, is considered beneficial and is ignored by this rule.
Notes
- TypeScript Only
Config
One option may be configured:
-
allow-arguments
allows type assertions to be used on object literals inside call expressions.
Examples
"no-object-literal-type-assertion": true
"no-object-literal-type-assertion": true,[object Object]
Schema
{
"type": "object",
"properties": {
"allow-arguments": {
"type": "boolean"
}
},
"additionalProperties": false
}
For more information see this page.
Type assertion on object literals is forbidden, use a type annotation instead. Open
options = {
tsConfig: 'projects/pattern-lib/tsconfig.lib.json',
angularBrowserTarget: null,
} as PresetOptions;
- Read upRead up
- Exclude checks
Rule: no-object-literal-type-assertion
Forbids an object literal to appear in a type assertion expression.
Casting to any
or to unknown
is still allowed.
Rationale
Always prefer const x: T = { ... };
to const x = { ... } as T;
.
The type assertion in the latter case is either unnecessary or hides an error.
The compiler will warn for excess properties with this syntax, but not missing required fields.
For example: const x: { foo: number } = {}
will fail to compile, but
const x = {} as { foo: number }
will succeed.
Additionally, the const assertion const x = { foo: 1 } as const
,
introduced in TypeScript 3.4, is considered beneficial and is ignored by this rule.
Notes
- TypeScript Only
Config
One option may be configured:
-
allow-arguments
allows type assertions to be used on object literals inside call expressions.
Examples
"no-object-literal-type-assertion": true
"no-object-literal-type-assertion": true,[object Object]
Schema
{
"type": "object",
"properties": {
"allow-arguments": {
"type": "boolean"
}
},
"additionalProperties": false
}
For more information see this page.