Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 109.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 109.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Rule: no-unused-expression

Disallows unused expression statements.

Unused expressions are expression statements which are not assignments or function calls (and thus usually no-ops).

Rationale

Detects potential errors where an assignment or function call was intended.

Config

Three arguments may be optionally provided:

• allow-fast-null-checks allows to use logical operators to perform fast null checks and perform method or function calls for side effects (e.g. e && e.preventDefault()).
• allow-new allows 'new' expressions for side effects (e.g. new ModifyGlobalState();.
• allow-tagged-template allows tagged templates for side effects (e.g. this.add\foo`;`.

Examples

"no-unused-expression": true

"no-unused-expression": true,allow-fast-null-checks

Schema

{
  "type": "array",
  "items": {
    "type": "string",
    "enum": [
      "allow-fast-null-checks",
      "allow-new",
      "allow-tagged-template"
    ]
  },
  "minLength": 0,
  "maxLength": 3
}

For more information see this page.

Rule: quotemark

Enforces quote character for string literals.

Notes

• Has Fix

Config

Five arguments may be optionally provided:

• "single" enforces single quotes.
• "double" enforces double quotes.
• "backtick" enforces backticks.
• "jsx-single" enforces single quotes for JSX attributes.
• "jsx-double" enforces double quotes for JSX attributes.
• "avoid-template" forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if "avoid-escape" is enabled and both single and double quotes are present in the string (the latter option takes precedence).
• "avoid-escape" allows you to use the "other" quotemark in cases where escaping would normally be required. For example, [true, "double", "avoid-escape"] would not report a failure on the string literal 'Hello "World"'.

Examples

"quotemark": true,single,avoid-escape,avoid-template

"quotemark": true,single,jsx-double

Schema

{
  "type": "array",
  "items": {
    "type": "string",
    "enum": [
      "single",
      "double",
      "backtick",
      "jsx-single",
      "jsx-double",
      "avoid-escape",
      "avoid-template"
    ]
  },
  "minLength": 0,
  "maxLength": 5
}

For more information see this page.

Rule: no-empty

Disallows empty blocks.

Blocks with a comment inside are not considered empty.

Rationale

Empty blocks are often indicators of missing code.

Config

If allow-empty-catch is specified, then catch blocks are allowed to be empty. If allow-empty-functions is specified, then function definitions are allowed to be empty.

Examples

"no-empty": true

"no-empty": true,allow-empty-catch

"no-empty": true,allow-empty-functions

"no-empty": true,allow-empty-catch,allow-empty-functions

Schema

{
  "type": "array",
  "items": {
    "anyOf": [
      {
        "type": "string",
        "enum": [
          "allow-empty-catch"
        ]
      },
      {
        "type": "string",
        "enum": [
          "allow-empty-functions"
        ]
      }
    ]
  }
}

For more information see this page.

Rule: no-empty

Disallows empty blocks.

Blocks with a comment inside are not considered empty.

Rationale

Empty blocks are often indicators of missing code.

Config

If allow-empty-catch is specified, then catch blocks are allowed to be empty. If allow-empty-functions is specified, then function definitions are allowed to be empty.

Examples

"no-empty": true

"no-empty": true,allow-empty-catch

"no-empty": true,allow-empty-functions

"no-empty": true,allow-empty-catch,allow-empty-functions

Schema

{
  "type": "array",
  "items": {
    "anyOf": [
      {
        "type": "string",
        "enum": [
          "allow-empty-catch"
        ]
      },
      {
        "type": "string",
        "enum": [
          "allow-empty-functions"
        ]
      }
    ]
  }
}

For more information see this page.

Rule: quotemark

Enforces quote character for string literals.

Notes

• Has Fix

Config

Five arguments may be optionally provided:

• "single" enforces single quotes.
• "double" enforces double quotes.
• "backtick" enforces backticks.
• "jsx-single" enforces single quotes for JSX attributes.
• "jsx-double" enforces double quotes for JSX attributes.
• "avoid-template" forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if "avoid-escape" is enabled and both single and double quotes are present in the string (the latter option takes precedence).
• "avoid-escape" allows you to use the "other" quotemark in cases where escaping would normally be required. For example, [true, "double", "avoid-escape"] would not report a failure on the string literal 'Hello "World"'.

Examples

"quotemark": true,single,avoid-escape,avoid-template

"quotemark": true,single,jsx-double

Schema

{
  "type": "array",
  "items": {
    "type": "string",
    "enum": [
      "single",
      "double",
      "backtick",
      "jsx-single",
      "jsx-double",
      "avoid-escape",
      "avoid-template"
    ]
  },
  "minLength": 0,
  "maxLength": 5
}

For more information see this page.

Rule: no-empty

Disallows empty blocks.

Blocks with a comment inside are not considered empty.

Rationale

Empty blocks are often indicators of missing code.

Config

If allow-empty-catch is specified, then catch blocks are allowed to be empty. If allow-empty-functions is specified, then function definitions are allowed to be empty.

Examples

"no-empty": true

"no-empty": true,allow-empty-catch

"no-empty": true,allow-empty-functions

"no-empty": true,allow-empty-catch,allow-empty-functions

Schema

{
  "type": "array",
  "items": {
    "anyOf": [
      {
        "type": "string",
        "enum": [
          "allow-empty-catch"
        ]
      },
      {
        "type": "string",
        "enum": [
          "allow-empty-functions"
        ]
      }
    ]
  }
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: no-unused-expression

Disallows unused expression statements.

Unused expressions are expression statements which are not assignments or function calls (and thus usually no-ops).

Rationale

Detects potential errors where an assignment or function call was intended.

Config

Three arguments may be optionally provided:

• allow-fast-null-checks allows to use logical operators to perform fast null checks and perform method or function calls for side effects (e.g. e && e.preventDefault()).
• allow-new allows 'new' expressions for side effects (e.g. new ModifyGlobalState();.
• allow-tagged-template allows tagged templates for side effects (e.g. this.add\foo`;`.

Examples

"no-unused-expression": true

"no-unused-expression": true,allow-fast-null-checks

Schema

{
  "type": "array",
  "items": {
    "type": "string",
    "enum": [
      "allow-fast-null-checks",
      "allow-new",
      "allow-tagged-template"
    ]
  },
  "minLength": 0,
  "maxLength": 3
}

For more information see this page.

Rule: no-unused-expression

Disallows unused expression statements.

Unused expressions are expression statements which are not assignments or function calls (and thus usually no-ops).

Rationale

Detects potential errors where an assignment or function call was intended.

Config

Three arguments may be optionally provided:

• allow-fast-null-checks allows to use logical operators to perform fast null checks and perform method or function calls for side effects (e.g. e && e.preventDefault()).
• allow-new allows 'new' expressions for side effects (e.g. new ModifyGlobalState();.
• allow-tagged-template allows tagged templates for side effects (e.g. this.add\foo`;`.

Examples

"no-unused-expression": true

"no-unused-expression": true,allow-fast-null-checks

Schema

{
  "type": "array",
  "items": {
    "type": "string",
    "enum": [
      "allow-fast-null-checks",
      "allow-new",
      "allow-tagged-template"
    ]
  },
  "minLength": 0,
  "maxLength": 3
}

For more information see this page.

Rule: no-empty

Disallows empty blocks.

Blocks with a comment inside are not considered empty.

Rationale

Empty blocks are often indicators of missing code.

Config

If allow-empty-catch is specified, then catch blocks are allowed to be empty. If allow-empty-functions is specified, then function definitions are allowed to be empty.

Examples

"no-empty": true

"no-empty": true,allow-empty-catch

"no-empty": true,allow-empty-functions

"no-empty": true,allow-empty-catch,allow-empty-functions

Schema

{
  "type": "array",
  "items": {
    "anyOf": [
      {
        "type": "string",
        "enum": [
          "allow-empty-catch"
        ]
      },
      {
        "type": "string",
        "enum": [
          "allow-empty-functions"
        ]
      }
    ]
  }
}

For more information see this page.

Rule: no-empty

Disallows empty blocks.

Blocks with a comment inside are not considered empty.

Rationale

Empty blocks are often indicators of missing code.

Config

If allow-empty-catch is specified, then catch blocks are allowed to be empty. If allow-empty-functions is specified, then function definitions are allowed to be empty.

Examples

"no-empty": true

"no-empty": true,allow-empty-catch

"no-empty": true,allow-empty-functions

"no-empty": true,allow-empty-catch,allow-empty-functions

Schema

{
  "type": "array",
  "items": {
    "anyOf": [
      {
        "type": "string",
        "enum": [
          "allow-empty-catch"
        ]
      },
      {
        "type": "string",
        "enum": [
          "allow-empty-functions"
        ]
      }
    ]
  }
}

For more information see this page.

Rule: quotemark

Enforces quote character for string literals.

Notes

• Has Fix

Config

Five arguments may be optionally provided:

• "single" enforces single quotes.
• "double" enforces double quotes.
• "backtick" enforces backticks.
• "jsx-single" enforces single quotes for JSX attributes.
• "jsx-double" enforces double quotes for JSX attributes.
• "avoid-template" forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if "avoid-escape" is enabled and both single and double quotes are present in the string (the latter option takes precedence).
• "avoid-escape" allows you to use the "other" quotemark in cases where escaping would normally be required. For example, [true, "double", "avoid-escape"] would not report a failure on the string literal 'Hello "World"'.

Examples

"quotemark": true,single,avoid-escape,avoid-template

"quotemark": true,single,jsx-double

Schema

{
  "type": "array",
  "items": {
    "type": "string",
    "enum": [
      "single",
      "double",
      "backtick",
      "jsx-single",
      "jsx-double",
      "avoid-escape",
      "avoid-template"
    ]
  },
  "minLength": 0,
  "maxLength": 5
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: quotemark

Enforces quote character for string literals.

Notes

• Has Fix

Config

Five arguments may be optionally provided:

• "single" enforces single quotes.
• "double" enforces double quotes.
• "backtick" enforces backticks.
• "jsx-single" enforces single quotes for JSX attributes.
• "jsx-double" enforces double quotes for JSX attributes.
• "avoid-template" forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if "avoid-escape" is enabled and both single and double quotes are present in the string (the latter option takes precedence).
• "avoid-escape" allows you to use the "other" quotemark in cases where escaping would normally be required. For example, [true, "double", "avoid-escape"] would not report a failure on the string literal 'Hello "World"'.

Examples

"quotemark": true,single,avoid-escape,avoid-template

"quotemark": true,single,jsx-double

Schema

{
  "type": "array",
  "items": {
    "type": "string",
    "enum": [
      "single",
      "double",
      "backtick",
      "jsx-single",
      "jsx-double",
      "avoid-escape",
      "avoid-template"
    ]
  },
  "minLength": 0,
  "maxLength": 5
}

For more information see this page.

Rule: no-empty

Disallows empty blocks.

Blocks with a comment inside are not considered empty.

Rationale

Empty blocks are often indicators of missing code.

Config

If allow-empty-catch is specified, then catch blocks are allowed to be empty. If allow-empty-functions is specified, then function definitions are allowed to be empty.

Examples

"no-empty": true

"no-empty": true,allow-empty-catch

"no-empty": true,allow-empty-functions

"no-empty": true,allow-empty-catch,allow-empty-functions

Schema

{
  "type": "array",
  "items": {
    "anyOf": [
      {
        "type": "string",
        "enum": [
          "allow-empty-catch"
        ]
      },
      {
        "type": "string",
        "enum": [
          "allow-empty-functions"
        ]
      }
    ]
  }
}

For more information see this page.

Rule: quotemark

Enforces quote character for string literals.

Notes

• Has Fix

Config

Five arguments may be optionally provided:

• "single" enforces single quotes.
• "double" enforces double quotes.
• "backtick" enforces backticks.
• "jsx-single" enforces single quotes for JSX attributes.
• "jsx-double" enforces double quotes for JSX attributes.
• "avoid-template" forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if "avoid-escape" is enabled and both single and double quotes are present in the string (the latter option takes precedence).
• "avoid-escape" allows you to use the "other" quotemark in cases where escaping would normally be required. For example, [true, "double", "avoid-escape"] would not report a failure on the string literal 'Hello "World"'.

Examples

"quotemark": true,single,avoid-escape,avoid-template

"quotemark": true,single,jsx-double

Schema

{
  "type": "array",
  "items": {
    "type": "string",
    "enum": [
      "single",
      "double",
      "backtick",
      "jsx-single",
      "jsx-double",
      "avoid-escape",
      "avoid-template"
    ]
  },
  "minLength": 0,
  "maxLength": 5
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: quotemark

Enforces quote character for string literals.

Notes

• Has Fix

Config

Five arguments may be optionally provided:

• "single" enforces single quotes.
• "double" enforces double quotes.
• "backtick" enforces backticks.
• "jsx-single" enforces single quotes for JSX attributes.
• "jsx-double" enforces double quotes for JSX attributes.
• "avoid-template" forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if "avoid-escape" is enabled and both single and double quotes are present in the string (the latter option takes precedence).
• "avoid-escape" allows you to use the "other" quotemark in cases where escaping would normally be required. For example, [true, "double", "avoid-escape"] would not report a failure on the string literal 'Hello "World"'.

Examples

"quotemark": true,single,avoid-escape,avoid-template

"quotemark": true,single,jsx-double

Schema

{
  "type": "array",
  "items": {
    "type": "string",
    "enum": [
      "single",
      "double",
      "backtick",
      "jsx-single",
      "jsx-double",
      "avoid-escape",
      "avoid-template"
    ]
  },
  "minLength": 0,
  "maxLength": 5
}

For more information see this page.