Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 98.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 98.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 98.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 98.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 98.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 98.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Rule: no-unused-expression

Disallows unused expression statements.

Unused expressions are expression statements which are not assignments or function calls (and thus usually no-ops).

Rationale

Detects potential errors where an assignment or function call was intended.

Config

Three arguments may be optionally provided:

• allow-fast-null-checks allows to use logical operators to perform fast null checks and perform method or function calls for side effects (e.g. e && e.preventDefault()).
• allow-new allows 'new' expressions for side effects (e.g. new ModifyGlobalState();.
• allow-tagged-template allows tagged templates for side effects (e.g. this.add\foo`;`.

Examples

"no-unused-expression": true

"no-unused-expression": true,allow-fast-null-checks

Schema

{
  "type": "array",
  "items": {
    "type": "string",
    "enum": [
      "allow-fast-null-checks",
      "allow-new",
      "allow-tagged-template"
    ]
  },
  "minLength": 0,
  "maxLength": 3
}

For more information see this page.

Rule: ban-comma-operator

Disallows the comma operator to be used.

Read more about the comma operator here.

Rationale

Using the comma operator can create a potential for many non-obvious bugs or lead to misunderstanding of code.

Examples

foo((bar, baz)); // evaluates to 'foo(baz)' because of the extra parens - confusing and not obvious

switch (foo) {
    case 1, 2: // equals 'case 2' - probably intended 'case 1: case2:'
        return true;
    case 3:
        return false;
}

let x = (y = 1, z = 2); // x is equal to 2 - this may not be immediately obvious.

Examples

"ban-comma-operator": true

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: no-object-literal-type-assertion

Forbids an object literal to appear in a type assertion expression. Casting to any or to unknown is still allowed.

Rationale

Always prefer const x: T = { ... }; to const x = { ... } as T;. The type assertion in the latter case is either unnecessary or hides an error. The compiler will warn for excess properties with this syntax, but not missing required fields. For example: const x: { foo: number } = {} will fail to compile, but const x = {} as { foo: number } will succeed. Additionally, the const assertion const x = { foo: 1 } as const, introduced in TypeScript 3.4, is considered beneficial and is ignored by this rule.

Notes

• TypeScript Only

Config

One option may be configured:

• allow-arguments allows type assertions to be used on object literals inside call expressions.

Examples

"no-object-literal-type-assertion": true

"no-object-literal-type-assertion": true,[object Object]

Schema

{
  "type": "object",
  "properties": {
    "allow-arguments": {
      "type": "boolean"
    }
  },
  "additionalProperties": false
}

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: ban-comma-operator

Disallows the comma operator to be used.

Read more about the comma operator here.

Rationale

Using the comma operator can create a potential for many non-obvious bugs or lead to misunderstanding of code.

Examples

foo((bar, baz)); // evaluates to 'foo(baz)' because of the extra parens - confusing and not obvious

switch (foo) {
    case 1, 2: // equals 'case 2' - probably intended 'case 1: case2:'
        return true;
    case 3:
        return false;
}

let x = (y = 1, z = 2); // x is equal to 2 - this may not be immediately obvious.

Examples

"ban-comma-operator": true

For more information see this page.

Rule: semicolon

Enforces consistent semicolon usage at the end of every statement.

Notes

• Has Fix

Config

One of the following arguments must be provided:

• "always" enforces semicolons at the end of every statement.
• "never" disallows semicolons at the end of every statement except for when they are necessary.

The following arguments may be optionally provided:

• "ignore-interfaces" skips checking semicolons at the end of interface members.
• "ignore-bound-class-methods" skips checking semicolons at the end of bound class methods.
• "strict-bound-class-methods" disables any special handling of bound class methods and treats them as any other assignment. This option overrides "ignore-bound-class-methods".

Examples

"semicolon": true,always

"semicolon": true,never

"semicolon": true,always,ignore-interfaces

"semicolon": true,always,ignore-bound-class-methods

Schema

{
  "type": "array",
  "items": [
    {
      "type": "string",
      "enum": [
        "always",
        "never"
      ]
    },
    {
      "type": "string",
      "enum": [
        "ignore-interfaces"
      ]
    }
  ],
  "additionalItems": false
}

For more information see this page.

Rule: no-unused-expression

Disallows unused expression statements.

Unused expressions are expression statements which are not assignments or function calls (and thus usually no-ops).

Rationale

Detects potential errors where an assignment or function call was intended.

Config

Three arguments may be optionally provided:

• allow-fast-null-checks allows to use logical operators to perform fast null checks and perform method or function calls for side effects (e.g. e && e.preventDefault()).
• allow-new allows 'new' expressions for side effects (e.g. new ModifyGlobalState();.
• allow-tagged-template allows tagged templates for side effects (e.g. this.add\foo`;`.

Examples

"no-unused-expression": true

"no-unused-expression": true,allow-fast-null-checks

Schema

{
  "type": "array",
  "items": {
    "type": "string",
    "enum": [
      "allow-fast-null-checks",
      "allow-new",
      "allow-tagged-template"
    ]
  },
  "minLength": 0,
  "maxLength": 3
}

For more information see this page.

Rule: no-unused-expression

Disallows unused expression statements.

Unused expressions are expression statements which are not assignments or function calls (and thus usually no-ops).

Rationale

Detects potential errors where an assignment or function call was intended.

Config

Three arguments may be optionally provided:

• allow-fast-null-checks allows to use logical operators to perform fast null checks and perform method or function calls for side effects (e.g. e && e.preventDefault()).
• allow-new allows 'new' expressions for side effects (e.g. new ModifyGlobalState();.
• allow-tagged-template allows tagged templates for side effects (e.g. this.add\foo`;`.

Examples

"no-unused-expression": true

"no-unused-expression": true,allow-fast-null-checks

Schema

{
  "type": "array",
  "items": {
    "type": "string",
    "enum": [
      "allow-fast-null-checks",
      "allow-new",
      "allow-tagged-template"
    ]
  },
  "minLength": 0,
  "maxLength": 3
}

For more information see this page.