fga-eps-mds/2019.2-Vsign

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

This cops checks if empty lines around the bodies of classes match the configuration.

Example: EnforcedStyle: empty_lines

# good

class Foo

  def bar
    # ...
  end

end

Example: EnforcedStyle: emptylinesexcept_namespace

# good

class Foo
  class Bar

    # ...

  end
end

Example: EnforcedStyle: emptylinesspecial

# good
class Foo

  def bar; end

end

Example: EnforcedStyle: noemptylines (default)

# good

class Foo
  def bar
    # ...
  end
end

This cop checks whether the end keywords are aligned properly.

Three modes are supported through the EnforcedStyleAlignWith configuration parameter:

If it's set to keyword (which is the default), the end shall be aligned with the start of the keyword (if, class, etc.).

If it's set to variable the end shall be aligned with the left-hand-side of the variable assignment, if there is one.

If it's set to start_of_line, the end shall be aligned with the start of the line where the matching keyword appears.

Example: EnforcedStyleAlignWith: keyword (default)

# bad

variable = if true
    end

# good

variable = if true
           end

Example: EnforcedStyleAlignWith: variable

# bad

variable = if true
    end

# good

variable = if true
end

Example: EnforcedStyleAlignWith: startofline

# bad

variable = if true
    end

# good

puts(if true
end)

This cops checks for two or more consecutive blank lines.

Example:

# bad - It has two empty lines.
some_method
# one empty line
# two empty lines
some_method

# good
some_method
# one empty line
some_method

This cops checks the indentation of the first key in a hash literal where the opening brace and the first key are on separate lines. The other keys' indentations are handled by the AlignHash cop.

By default, Hash literals that are arguments in a method call with parentheses, and where the opening curly brace of the hash is on the same line as the opening parenthesis of the method call, shall have their first key indented one step (two spaces) more than the position inside the opening parenthesis.

Other hash literals shall have their first key indented one step more than the start of the line where the opening curly brace is.

This default style is called 'specialinsideparentheses'. Alternative styles are 'consistent' and 'align_braces'. Here are examples:

Example: EnforcedStyle: specialinsideparentheses (default)

# The `special_inside_parentheses` style enforces that the first key
# in a hash literal where the opening brace and the first key are on
# separate lines is indented one step (two spaces) more than the
# position inside the opening parentheses.

# bad
hash = {
  key: :value
}
and_in_a_method_call({
  no: :difference
                     })

# good
special_inside_parentheses
hash = {
  key: :value
}
but_in_a_method_call({
                       its_like: :this
                     })

Example: EnforcedStyle: consistent

# The `consistent` style enforces that the first key in a hash
# literal where the opening brace and the first key are on
# seprate lines is indented the same as a hash literal which is not
# defined inside a method call.

# bad
hash = {
  key: :value
}
but_in_a_method_call({
                       its_like: :this
                      })

# good
hash = {
  key: :value
}
and_in_a_method_call({
  no: :difference
})

Example: EnforcedStyle: align_braces

# The `align_brackets` style enforces that the opening and closing
# braces are indented to the same position.

# bad
and_now_for_something = {
                          completely: :different
}

# good
and_now_for_something = {
                          completely: :different
                        }

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

This cop checks that the closing brace in a method call is either on the same line as the last method argument, or a new line.

When using the symmetrical (default) style:

If a method call's opening brace is on the same line as the first argument of the call, then the closing brace should be on the same line as the last argument of the call.

If an method call's opening brace is on the line above the first argument of the call, then the closing brace should be on the line below the last argument of the call.

When using the new_line style:

The closing brace of a multi-line method call must be on the line after the last argument of the call.

When using the same_line style:

The closing brace of a multi-line method call must be on the same line as the last argument of the call.

Example:

# symmetrical: bad
  # new_line: good
  # same_line: bad
  foo(a,
    b
  )

  # symmetrical: bad
  # new_line: bad
  # same_line: good
  foo(
    a,
    b)

  # symmetrical: good
  # new_line: bad
  # same_line: good
  foo(a,
    b)

  # symmetrical: good
  # new_line: good
  # same_line: bad
  foo(
    a,
    b
  )

This cop checks whether the end keywords are aligned properly.

Three modes are supported through the EnforcedStyleAlignWith configuration parameter:

If it's set to keyword (which is the default), the end shall be aligned with the start of the keyword (if, class, etc.).

If it's set to variable the end shall be aligned with the left-hand-side of the variable assignment, if there is one.

If it's set to start_of_line, the end shall be aligned with the start of the line where the matching keyword appears.

Example: EnforcedStyleAlignWith: keyword (default)

# bad

variable = if true
    end

# good

variable = if true
           end

Example: EnforcedStyleAlignWith: variable

# bad

variable = if true
    end

# good

variable = if true
end

Example: EnforcedStyleAlignWith: startofline

# bad

variable = if true
    end

# good

puts(if true
end)

This cop checks for missing top-level documentation of classes and modules. Classes with no body are exempt from the check and so are namespace modules - modules that have nothing in their bodies except classes, other modules, or constant definitions.

The documentation requirement is annulled if the class or module has a "#:nodoc:" comment next to it. Likewise, "#:nodoc: all" does the same for all its children.

Example:

# bad
class Person
  # ...
end

# good
# Description/Explanation of Person class
class Person
  # ...
end

This cops checks if empty lines around the bodies of classes match the configuration.

Example: EnforcedStyle: empty_lines

# good

class Foo

  def bar
    # ...
  end

end

Example: EnforcedStyle: emptylinesexcept_namespace

# good

class Foo
  class Bar

    # ...

  end
end

Example: EnforcedStyle: emptylinesspecial

# good
class Foo

  def bar; end

end

Example: EnforcedStyle: noemptylines (default)

# good

class Foo
  def bar
    # ...
  end
end

Check for uses of braces or do/end around single line or multi-line blocks.

Example: EnforcedStyle: linecountbased (default)

# bad - single line block
items.each do |item| item / 5 end

# good - single line block
items.each { |item| item / 5 }

# bad - multi-line block
things.map { |thing|
  something = thing.some_method
  process(something)
}

# good - multi-line block
things.map do |thing|
  something = thing.some_method
  process(something)
end

Example: EnforcedStyle: semantic

# Prefer `do...end` over `{...}` for procedural blocks.

# return value is used/assigned
# bad
foo = map do |x|
  x
end
puts (map do |x|
  x
end)

# return value is not used out of scope
# good
map do |x|
  x
end

# Prefer `{...}` over `do...end` for functional blocks.

# return value is not used out of scope
# bad
each { |x|
  x
}

# return value is used/assigned
# good
foo = map { |x|
  x
}
map { |x|
  x
}.inspect

Example: EnforcedStyle: bracesforchaining

# bad
words.each do |word|
  word.flip.flop
end.join("-")

# good
words.each { |word|
  word.flip.flop
}.join("-")

This cops checks the indentation of the first key in a hash literal where the opening brace and the first key are on separate lines. The other keys' indentations are handled by the AlignHash cop.

By default, Hash literals that are arguments in a method call with parentheses, and where the opening curly brace of the hash is on the same line as the opening parenthesis of the method call, shall have their first key indented one step (two spaces) more than the position inside the opening parenthesis.

Other hash literals shall have their first key indented one step more than the start of the line where the opening curly brace is.

This default style is called 'specialinsideparentheses'. Alternative styles are 'consistent' and 'align_braces'. Here are examples:

Example: EnforcedStyle: specialinsideparentheses (default)

# The `special_inside_parentheses` style enforces that the first key
# in a hash literal where the opening brace and the first key are on
# separate lines is indented one step (two spaces) more than the
# position inside the opening parentheses.

# bad
hash = {
  key: :value
}
and_in_a_method_call({
  no: :difference
                     })

# good
special_inside_parentheses
hash = {
  key: :value
}
but_in_a_method_call({
                       its_like: :this
                     })

Example: EnforcedStyle: consistent

# The `consistent` style enforces that the first key in a hash
# literal where the opening brace and the first key are on
# seprate lines is indented the same as a hash literal which is not
# defined inside a method call.

# bad
hash = {
  key: :value
}
but_in_a_method_call({
                       its_like: :this
                      })

# good
hash = {
  key: :value
}
and_in_a_method_call({
  no: :difference
})

Example: EnforcedStyle: align_braces

# The `align_brackets` style enforces that the opening and closing
# braces are indented to the same position.

# bad
and_now_for_something = {
                          completely: :different
}

# good
and_now_for_something = {
                          completely: :different
                        }

This cops checks for indentation that doesn't use the specified number of spaces.

See also the IndentationConsistency cop which is the companion to this one.

Example:

# bad
class A
 def test
  puts 'hello'
 end
end

# good
class A
  def test
    puts 'hello'
  end
end

Example: IgnoredPatterns: ['^\s*module']

# bad
module A
class B
  def test
  puts 'hello'
  end
end
end

# good
module A
class B
  def test
    puts 'hello'
  end
end
end