fga-gpp-mds/2017.1-Escola-X

This cop checks if the length a class exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.

This cop checks if the length of a method exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.

This cop checks if the length of a method exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.

This cop checks if the length of a method exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.

A method with Too Many Statements is any method that has a large number of lines.

Too Many Statements warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements counts +1 for every simple statement in a method and +1 for every statement within a control structure (if, else, case, when, for, while, until, begin, rescue) but it doesn't count the control structure itself.

So the following method would score +6 in Reek's statement-counting algorithm:

def parse(arg, argv, &error)
  if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
    return nil, block, nil                                         # +1
  end
  opt = (val = parse_arg(val, &error))[1]                          # +2
  val = conv_arg(*val)                                             # +3
  if opt and !arg
    argv.shift                                                     # +4
  else
    val[0] = nil                                                   # +5
  end
  val                                                              # +6
end

(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)

A method with Too Many Statements is any method that has a large number of lines.

Too Many Statements warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements counts +1 for every simple statement in a method and +1 for every statement within a control structure (if, else, case, when, for, while, until, begin, rescue) but it doesn't count the control structure itself.

So the following method would score +6 in Reek's statement-counting algorithm:

def parse(arg, argv, &error)
  if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
    return nil, block, nil                                         # +1
  end
  opt = (val = parse_arg(val, &error))[1]                          # +2
  val = conv_arg(*val)                                             # +3
  if opt and !arg
    argv.shift                                                     # +4
  else
    val[0] = nil                                                   # +5
  end
  val                                                              # +6
end

(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)

A method with Too Many Statements is any method that has a large number of lines.

Too Many Statements warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements counts +1 for every simple statement in a method and +1 for every statement within a control structure (if, else, case, when, for, while, until, begin, rescue) but it doesn't count the control structure itself.

So the following method would score +6 in Reek's statement-counting algorithm:

def parse(arg, argv, &error)
  if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
    return nil, block, nil                                         # +1
  end
  opt = (val = parse_arg(val, &error))[1]                          # +2
  val = conv_arg(*val)                                             # +3
  if opt and !arg
    argv.shift                                                     # +4
  else
    val[0] = nil                                                   # +5
  end
  val                                                              # +6
end

(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)

Too Many Instance Variables is a special case of LargeClass.

Example

Given this configuration

TooManyInstanceVariables:
  max_instance_variables: 3

and this code:

class TooManyInstanceVariables
  def initialize
    @arg_1 = :dummy
    @arg_2 = :dummy
    @arg_3 = :dummy
    @arg_4 = :dummy
  end
end

Reek would emit the following warning:

test.rb -- 5 warnings:
  [1]:TooManyInstanceVariables has at least 4 instance variables (TooManyInstanceVariables)

A Nested Iterator occurs when a block contains another block.

Example

Given

class Duck
  class << self
    def duck_names
      %i!tick trick track!.each do |surname|
        %i!duck!.each do |last_name|
          puts "full name is #{surname} #{last_name}"
        end
      end
    end
  end
end

Reek would report the following warning:

test.rb -- 1 warning:
  [5]:Duck#duck_names contains iterators nested 2 deep (NestedIterators)

Repeated Conditional is a special case of Simulated Polymorphism. Basically it means you are checking the same value throughout a single class and take decisions based on this.

Example

Given

class RepeatedConditionals
  attr_accessor :switch

  def repeat_1
    puts "Repeat 1!" if switch
  end

  def repeat_2
    puts "Repeat 2!" if switch
  end

  def repeat_3
    puts "Repeat 3!" if switch
  end
end

Reek would emit the following warning:

test.rb -- 4 warnings:
  [5, 9, 13]:RepeatedConditionals tests switch at least 3 times (RepeatedConditional)

If you get this warning then you are probably not using the right abstraction or even more probable, missing an additional abstraction.

Classes should not assume that instance variables are set or present outside of the current class definition.

Good:

class Foo
  def initialize
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Good as well:

class Foo
  def foo?
    bar == :foo
  end

  def bar
    @bar ||= :foo
  end
end

Bad:

class Foo
  def go_foo!
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Example

Running Reek on:

class Dummy
  def test
    @ivar
  end
end

would report:

[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar

Note that this example would trigger this smell warning as well:

class Parent
  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    @omg
  end
end

The way to address the smell warning is that you should create an attr_reader to use @omg in the subclass and not access @omg directly like this:

class Parent
  attr_reader :omg

  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    omg
  end
end

Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.

If you don't want to expose those methods as public API just make them private like this:

class Parent
  def initialize(omg)
    @omg = omg
  end

  private
  attr_reader :omg
end

class Child < Parent
  def foo
    omg
  end
end

Current Support in Reek

An instance variable must:

• be set in the constructor
• or be accessed through a method with lazy initialization / memoization.

If not, Instance Variable Assumption will be reported.

Classes should not assume that instance variables are set or present outside of the current class definition.

Good:

class Foo
  def initialize
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Good as well:

class Foo
  def foo?
    bar == :foo
  end

  def bar
    @bar ||= :foo
  end
end

Bad:

class Foo
  def go_foo!
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Example

Running Reek on:

class Dummy
  def test
    @ivar
  end
end

would report:

[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar

Note that this example would trigger this smell warning as well:

class Parent
  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    @omg
  end
end

The way to address the smell warning is that you should create an attr_reader to use @omg in the subclass and not access @omg directly like this:

class Parent
  attr_reader :omg

  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    omg
  end
end

Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.

If you don't want to expose those methods as public API just make them private like this:

class Parent
  def initialize(omg)
    @omg = omg
  end

  private
  attr_reader :omg
end

class Child < Parent
  def foo
    omg
  end
end

Current Support in Reek

An instance variable must:

• be set in the constructor
• or be accessed through a method with lazy initialization / memoization.

If not, Instance Variable Assumption will be reported.

Classes should not assume that instance variables are set or present outside of the current class definition.

Good:

class Foo
  def initialize
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Good as well:

class Foo
  def foo?
    bar == :foo
  end

  def bar
    @bar ||= :foo
  end
end

Bad:

class Foo
  def go_foo!
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Example

Running Reek on:

class Dummy
  def test
    @ivar
  end
end

would report:

[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar

Note that this example would trigger this smell warning as well:

class Parent
  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    @omg
  end
end

The way to address the smell warning is that you should create an attr_reader to use @omg in the subclass and not access @omg directly like this:

class Parent
  attr_reader :omg

  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    omg
  end
end

Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.

If you don't want to expose those methods as public API just make them private like this:

class Parent
  def initialize(omg)
    @omg = omg
  end

  private
  attr_reader :omg
end

class Child < Parent
  def foo
    omg
  end
end

Current Support in Reek

An instance variable must:

• be set in the constructor
• or be accessed through a method with lazy initialization / memoization.

If not, Instance Variable Assumption will be reported.

Classes and modules are the units of reuse and release. It is therefore considered good practice to annotate every class and module with a brief comment outlining its responsibilities.

Example

Given

class Dummy
  # Do things...
end

Reek would emit the following warning:

test.rb -- 1 warning:
  [1]:Dummy has no descriptive comment (IrresponsibleModule)

Fixing this is simple - just an explaining comment:

# The Dummy class is responsible for ...
class Dummy
  # Do things...
end

Classes should not assume that instance variables are set or present outside of the current class definition.

Good:

class Foo
  def initialize
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Good as well:

class Foo
  def foo?
    bar == :foo
  end

  def bar
    @bar ||= :foo
  end
end

Bad:

class Foo
  def go_foo!
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Example

Running Reek on:

class Dummy
  def test
    @ivar
  end
end

would report:

[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar

Note that this example would trigger this smell warning as well:

class Parent
  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    @omg
  end
end

The way to address the smell warning is that you should create an attr_reader to use @omg in the subclass and not access @omg directly like this:

class Parent
  attr_reader :omg

  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    omg
  end
end

Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.

If you don't want to expose those methods as public API just make them private like this:

class Parent
  def initialize(omg)
    @omg = omg
  end

  private
  attr_reader :omg
end

class Child < Parent
  def foo
    omg
  end
end

Current Support in Reek

An instance variable must:

• be set in the constructor
• or be accessed through a method with lazy initialization / memoization.

If not, Instance Variable Assumption will be reported.

Classes should not assume that instance variables are set or present outside of the current class definition.

Good:

class Foo
  def initialize
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Good as well:

class Foo
  def foo?
    bar == :foo
  end

  def bar
    @bar ||= :foo
  end
end

Bad:

class Foo
  def go_foo!
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Example

Running Reek on:

class Dummy
  def test
    @ivar
  end
end

would report:

[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar

Note that this example would trigger this smell warning as well:

class Parent
  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    @omg
  end
end

The way to address the smell warning is that you should create an attr_reader to use @omg in the subclass and not access @omg directly like this:

class Parent
  attr_reader :omg

  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    omg
  end
end

Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.

If you don't want to expose those methods as public API just make them private like this:

class Parent
  def initialize(omg)
    @omg = omg
  end

  private
  attr_reader :omg
end

class Child < Parent
  def foo
    omg
  end
end

Current Support in Reek

An instance variable must:

• be set in the constructor
• or be accessed through a method with lazy initialization / memoization.

If not, Instance Variable Assumption will be reported.

Classes should not assume that instance variables are set or present outside of the current class definition.

Good:

class Foo
  def initialize
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Good as well:

class Foo
  def foo?
    bar == :foo
  end

  def bar
    @bar ||= :foo
  end
end

Bad:

class Foo
  def go_foo!
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Example

Running Reek on:

class Dummy
  def test
    @ivar
  end
end

would report:

[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar

Note that this example would trigger this smell warning as well:

class Parent
  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    @omg
  end
end

The way to address the smell warning is that you should create an attr_reader to use @omg in the subclass and not access @omg directly like this:

class Parent
  attr_reader :omg

  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    omg
  end
end

Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.

If you don't want to expose those methods as public API just make them private like this:

class Parent
  def initialize(omg)
    @omg = omg
  end

  private
  attr_reader :omg
end

class Child < Parent
  def foo
    omg
  end
end

Current Support in Reek

An instance variable must:

• be set in the constructor
• or be accessed through a method with lazy initialization / memoization.

If not, Instance Variable Assumption will be reported.

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Here we check if the parameters on a multi-line method call or definition are aligned.

Example: EnforcedStyle: withfirstparameter (default)

# good

foo :bar,
    :baz

# bad

foo :bar,
  :baz

Example: EnforcedStyle: withfixedindentation

# good

foo :bar,
  :baz

# bad

foo :bar,
    :baz

Checks for spaces inside ordinary round parentheses.

Example:

# bad
f( 3)
g = (a + 3 )

# good
f(3)
g = (a + 3)

This cop checks for the presence of superfluous parentheses around the condition of if/unless/while/until.

Example:

# bad
x += 1 while (x < 10)
foo unless (bar || baz)

if (x > 10)
elsif (x < 3)
end

# good
x += 1 while x < 10
foo unless bar || baz

if x > 10
elsif x < 3
end

This cop checks for the presence of superfluous parentheses around the condition of if/unless/while/until.

Example:

# bad
x += 1 while (x < 10)
foo unless (bar || baz)

if (x > 10)
elsif (x < 3)
end

# good
x += 1 while x < 10
foo unless bar || baz

if x > 10
elsif x < 3
end

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Here we check if the parameters on a multi-line method call or definition are aligned.

Example: EnforcedStyle: withfirstparameter (default)

# good

foo :bar,
    :baz

# bad

foo :bar,
  :baz

Example: EnforcedStyle: withfixedindentation

# good

foo :bar,
  :baz

# bad

foo :bar,
    :baz

Checks for spaces inside ordinary round parentheses.

Example:

# bad
f( 3)
g = (a + 3 )

# good
f(3)
g = (a + 3)

Checks for spaces inside ordinary round parentheses.

Example:

# bad
f( 3)
g = (a + 3 )

# good
f(3)
g = (a + 3)

Checks for spaces inside ordinary round parentheses.

Example:

# bad
f( 3)
g = (a + 3 )

# good
f(3)
g = (a + 3)

This cop checks for the presence of superfluous parentheses around the condition of if/unless/while/until.

Example:

# bad
x += 1 while (x < 10)
foo unless (bar || baz)

if (x > 10)
elsif (x < 3)
end

# good
x += 1 while x < 10
foo unless bar || baz

if x > 10
elsif x < 3
end

This cop checks for the presence of superfluous parentheses around the condition of if/unless/while/until.

Example:

# bad
x += 1 while (x < 10)
foo unless (bar || baz)

if (x > 10)
elsif (x < 3)
end

# good
x += 1 while x < 10
foo unless bar || baz

if x > 10
elsif x < 3
end

This cop checks for the presence of superfluous parentheses around the condition of if/unless/while/until.

Example:

# bad
x += 1 while (x < 10)
foo unless (bar || baz)

if (x > 10)
elsif (x < 3)
end

# good
x += 1 while x < 10
foo unless bar || baz

if x > 10
elsif x < 3
end

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Here we check if the parameters on a multi-line method call or definition are aligned.

Example: EnforcedStyle: withfirstparameter (default)

# good

foo :bar,
    :baz

# bad

foo :bar,
  :baz

Example: EnforcedStyle: withfixedindentation

# good

foo :bar,
  :baz

# bad

foo :bar,
    :baz

Here we check if the parameters on a multi-line method call or definition are aligned.

Example: EnforcedStyle: withfirstparameter (default)

# good

foo :bar,
    :baz

# bad

foo :bar,
  :baz

Example: EnforcedStyle: withfixedindentation

# good

foo :bar,
  :baz

# bad

foo :bar,
    :baz

Checks for spaces inside ordinary round parentheses.

Example:

# bad
f( 3)
g = (a + 3 )

# good
f(3)
g = (a + 3)

Checks for spaces inside ordinary round parentheses.

Example:

# bad
f( 3)
g = (a + 3 )

# good
f(3)
g = (a + 3)

This cop checks for redundant parentheses.

Example:

# bad
(x) if ((y.z).nil?)

# good
x if y.z.nil?

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

This cops checks if empty lines around the bodies of classes match the configuration.

Example: EnforcedStyle: empty_lines

# good

class Foo

  def bar
    # ...
  end

end

Example: EnforcedStyle: emptylinesexcept_namespace

# good

class Foo
  class Bar

    # ...

  end
end

Example: EnforcedStyle: emptylinesspecial

# good
class Foo

  def bar; end

end

Example: EnforcedStyle: noemptylines (default)

# good

class Foo
  def bar
    # ...
  end
end

This cop checks for redundant parentheses.

Example:

# bad
(x) if ((y.z).nil?)

# good
x if y.z.nil?

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

This cop checks for missing top-level documentation of classes and modules. Classes with no body are exempt from the check and so are namespace modules - modules that have nothing in their bodies except classes, other modules, or constant definitions.

The documentation requirement is annulled if the class or module has a "#:nodoc:" comment next to it. Likewise, "#:nodoc: all" does the same for all its children.

Example:

# bad
class Person
  # ...
end

# good
# Description/Explanation of Person class
class Person
  # ...
end

This cop checks for the presence of superfluous parentheses around the condition of if/unless/while/until.

Example:

# bad
x += 1 while (x < 10)
foo unless (bar || baz)

if (x > 10)
elsif (x < 3)
end

# good
x += 1 while x < 10
foo unless bar || baz

if x > 10
elsif x < 3
end

This cop checks for redundant parentheses.

Example:

# bad
(x) if ((y.z).nil?)

# good
x if y.z.nil?

This cop checks for redundant parentheses.

Example:

# bad
(x) if ((y.z).nil?)

# good
x if y.z.nil?

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Here we check if the parameters on a multi-line method call or definition are aligned.

Example: EnforcedStyle: withfirstparameter (default)

# good

foo :bar,
    :baz

# bad

foo :bar,
  :baz

Example: EnforcedStyle: withfixedindentation

# good

foo :bar,
  :baz

# bad

foo :bar,
    :baz

Checks for spaces inside ordinary round parentheses.

Example:

# bad
f( 3)
g = (a + 3 )

# good
f(3)
g = (a + 3)

This cop checks for the presence of superfluous parentheses around the condition of if/unless/while/until.

Example:

# bad
x += 1 while (x < 10)
foo unless (bar || baz)

if (x > 10)
elsif (x < 3)
end

# good
x += 1 while x < 10
foo unless bar || baz

if x > 10
elsif x < 3
end

This cop checks for redundant parentheses.

Example:

# bad
(x) if ((y.z).nil?)

# good
x if y.z.nil?

Here we check if the parameters on a multi-line method call or definition are aligned.

Example: EnforcedStyle: withfirstparameter (default)

# good

foo :bar,
    :baz

# bad

foo :bar,
  :baz

Example: EnforcedStyle: withfixedindentation

# good

foo :bar,
  :baz

# bad

foo :bar,
    :baz

Here we check if the parameters on a multi-line method call or definition are aligned.

Example: EnforcedStyle: withfirstparameter (default)

# good

foo :bar,
    :baz

# bad

foo :bar,
  :baz

Example: EnforcedStyle: withfixedindentation

# good

foo :bar,
  :baz

# bad

foo :bar,
    :baz

Checks for spaces inside ordinary round parentheses.

Example:

# bad
f( 3)
g = (a + 3 )

# good
f(3)
g = (a + 3)

This cop checks for the presence of superfluous parentheses around the condition of if/unless/while/until.

Example:

# bad
x += 1 while (x < 10)
foo unless (bar || baz)

if (x > 10)
elsif (x < 3)
end

# good
x += 1 while x < 10
foo unless bar || baz

if x > 10
elsif x < 3
end

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Here we check if the parameters on a multi-line method call or definition are aligned.

Example: EnforcedStyle: withfirstparameter (default)

# good

foo :bar,
    :baz

# bad

foo :bar,
  :baz

Example: EnforcedStyle: withfixedindentation

# good

foo :bar,
  :baz

# bad

foo :bar,
    :baz

This cop checks for redundant parentheses.

Example:

# bad
(x) if ((y.z).nil?)

# good
x if y.z.nil?

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Here we check if the parameters on a multi-line method call or definition are aligned.

Example: EnforcedStyle: withfirstparameter (default)

# good

foo :bar,
    :baz

# bad

foo :bar,
  :baz

Example: EnforcedStyle: withfixedindentation

# good

foo :bar,
  :baz

# bad

foo :bar,
    :baz

Access modifiers should be surrounded by blank lines.

Example:

# bad
class Foo
  def bar; end
  private
  def baz; end
end

# good
class Foo
  def bar; end

  private

  def baz; end
end

Checks for spaces inside ordinary round parentheses.

Example:

# bad
f( 3)
g = (a + 3 )

# good
f(3)
g = (a + 3)

Checks for spaces inside ordinary round parentheses.

Example:

# bad
f( 3)
g = (a + 3 )

# good
f(3)
g = (a + 3)

Checks for spaces inside ordinary round parentheses.

Example:

# bad
f( 3)
g = (a + 3 )

# good
f(3)
g = (a + 3)

This cop checks for redundant parentheses.

Example:

# bad
(x) if ((y.z).nil?)

# good
x if y.z.nil?

Checks for spaces inside ordinary round parentheses.

Example:

# bad
f( 3)
g = (a + 3 )

# good
f(3)
g = (a + 3)

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks for spaces inside ordinary round parentheses.

Example:

# bad
f( 3)
g = (a + 3 )

# good
f(3)
g = (a + 3)

This cop checks for the presence of superfluous parentheses around the condition of if/unless/while/until.

Example:

# bad
x += 1 while (x < 10)
foo unless (bar || baz)

if (x > 10)
elsif (x < 3)
end

# good
x += 1 while x < 10
foo unless bar || baz

if x > 10
elsif x < 3
end

Checks for spaces inside ordinary round parentheses.

Example:

# bad
f( 3)
g = (a + 3 )

# good
f(3)
g = (a + 3)

Modifiers should be indented as deep as method definitions, or as deep as the class/module keyword, depending on configuration.

Example: EnforcedStyle: indent (default)

# bad
class Plumbus
private
  def smooth; end
end

# good
class Plumbus
  private
  def smooth; end
end

Example: EnforcedStyle: outdent

# bad
class Plumbus
  private
  def smooth; end
end

# good
class Plumbus
private
  def smooth; end
end

Here we check if the parameters on a multi-line method call or definition are aligned.

Example: EnforcedStyle: withfirstparameter (default)

# good

foo :bar,
    :baz

# bad

foo :bar,
  :baz

Example: EnforcedStyle: withfixedindentation

# good

foo :bar,
  :baz

# bad

foo :bar,
    :baz

Checks for spaces inside ordinary round parentheses.

Example:

# bad
f( 3)
g = (a + 3 )

# good
f(3)
g = (a + 3)

Here we check if the parameters on a multi-line method call or definition are aligned.

Example: EnforcedStyle: withfirstparameter (default)

# good

foo :bar,
    :baz

# bad

foo :bar,
  :baz

Example: EnforcedStyle: withfixedindentation

# good

foo :bar,
  :baz

# bad

foo :bar,
    :baz

This cops checks for indentation that doesn't use the specified number of spaces.

See also the IndentationConsistency cop which is the companion to this one.

Example:

# bad
class A
 def test
  puts 'hello'
 end
end

# good
class A
  def test
    puts 'hello'
  end
end

Example: IgnoredPatterns: ['^\s*module']

# bad
module A
class B
  def test
  puts 'hello'
  end
end
end

# good
module A
class B
  def test
    puts 'hello'
  end
end
end

Checks for spaces inside ordinary round parentheses.

Example:

# bad
f( 3)
g = (a + 3 )

# good
f(3)
g = (a + 3)

This cop checks for redundant parentheses.

Example:

# bad
(x) if ((y.z).nil?)

# good
x if y.z.nil?

This cop checks for redundant parentheses.

Example:

# bad
(x) if ((y.z).nil?)

# good
x if y.z.nil?