Showing 66 of 66 total issues
PasswordBlocklist::Checker assumes too much for instance variable '@current_list_size' Open
class Checker
- Read upRead up
- Exclude checks
Classes should not assume that instance variables are set or present outside of the current class definition.
Good:
class Foo
def initialize
@bar = :foo
end
def foo?
@bar == :foo
end
end
Good as well:
class Foo
def foo?
bar == :foo
end
def bar
@bar ||= :foo
end
end
Bad:
class Foo
def go_foo!
@bar = :foo
end
def foo?
@bar == :foo
end
end
Example
Running Reek on:
class Dummy
def test
@ivar
end
end
would report:
[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar
Note that this example would trigger this smell warning as well:
class Parent
def initialize(omg)
@omg = omg
end
end
class Child < Parent
def foo
@omg
end
end
The way to address the smell warning is that you should create an attr_reader
to use @omg
in the subclass and not access @omg
directly like this:
class Parent
attr_reader :omg
def initialize(omg)
@omg = omg
end
end
class Child < Parent
def foo
omg
end
end
Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.
If you don't want to expose those methods as public API just make them private like this:
class Parent
def initialize(omg)
@omg = omg
end
private
attr_reader :omg
end
class Child < Parent
def foo
omg
end
end
Current Support in Reek
An instance variable must:
- be set in the constructor
- or be accessed through a method with lazy initialization / memoization.
If not, Instance Variable Assumption will be reported.
PasswordBlocklist::Checker::UnknownListSizeError has no descriptive comment Open
class UnknownListSizeError < StandardError; end
- Read upRead up
- Exclude checks
Classes and modules are the units of reuse and release. It is therefore considered good practice to annotate every class and module with a brief comment outlining its responsibilities.
Example
Given
class Dummy
# Do things...
end
Reek would emit the following warning:
test.rb -- 1 warning:
[1]:Dummy has no descriptive comment (IrresponsibleModule)
Fixing this is simple - just an explaining comment:
# The Dummy class is responsible for ...
class Dummy
# Do things...
end
PasswordBlocklist::Checker assumes too much for instance variable '@data' Open
class Checker
- Read upRead up
- Exclude checks
Classes should not assume that instance variables are set or present outside of the current class definition.
Good:
class Foo
def initialize
@bar = :foo
end
def foo?
@bar == :foo
end
end
Good as well:
class Foo
def foo?
bar == :foo
end
def bar
@bar ||= :foo
end
end
Bad:
class Foo
def go_foo!
@bar = :foo
end
def foo?
@bar == :foo
end
end
Example
Running Reek on:
class Dummy
def test
@ivar
end
end
would report:
[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar
Note that this example would trigger this smell warning as well:
class Parent
def initialize(omg)
@omg = omg
end
end
class Child < Parent
def foo
@omg
end
end
The way to address the smell warning is that you should create an attr_reader
to use @omg
in the subclass and not access @omg
directly like this:
class Parent
attr_reader :omg
def initialize(omg)
@omg = omg
end
end
class Child < Parent
def foo
omg
end
end
Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.
If you don't want to expose those methods as public API just make them private like this:
class Parent
def initialize(omg)
@omg = omg
end
private
attr_reader :omg
end
class Child < Parent
def foo
omg
end
end
Current Support in Reek
An instance variable must:
- be set in the constructor
- or be accessed through a method with lazy initialization / memoization.
If not, Instance Variable Assumption will be reported.
PasswordBlocklist has no descriptive comment Open
module PasswordBlocklist
- Read upRead up
- Exclude checks
Classes and modules are the units of reuse and release. It is therefore considered good practice to annotate every class and module with a brief comment outlining its responsibilities.
Example
Given
class Dummy
# Do things...
end
Reek would emit the following warning:
test.rb -- 1 warning:
[1]:Dummy has no descriptive comment (IrresponsibleModule)
Fixing this is simple - just an explaining comment:
# The Dummy class is responsible for ...
class Dummy
# Do things...
end
PasswordBlocklist::Checker has no descriptive comment Open
class Checker
- Read upRead up
- Exclude checks
Classes and modules are the units of reuse and release. It is therefore considered good practice to annotate every class and module with a brief comment outlining its responsibilities.
Example
Given
class Dummy
# Do things...
end
Reek would emit the following warning:
test.rb -- 1 warning:
[1]:Dummy has no descriptive comment (IrresponsibleModule)
Fixing this is simple - just an explaining comment:
# The Dummy class is responsible for ...
class Dummy
# Do things...
end
PasswordBlocklist::Checker#blocklisted? performs a nil-check Open
load_list_file(DEFAULT_SIZE) if @current_list_size.nil?
- Read upRead up
- Exclude checks
A NilCheck
is a type check. Failures of NilCheck
violate the "tell, don't ask" principle.
Additionally, type checks often mask bigger problems in your source code like not using OOP and / or polymorphism when you should.
Example
Given
class Klass
def nil_checker(argument)
if argument.nil?
puts "argument isn't nil!"
end
end
end
Reek would emit the following warning:
test.rb -- 1 warning:
[3]:Klass#nil_checker performs a nil-check. (NilCheck)
Lists should be surrounded by blank lines Open
* Added a post-install message and deprecation message regarding renaming
- Read upRead up
- Exclude checks
MD032 - Lists should be surrounded by blank lines
Tags: bullet, ul, ol, blank_lines
Aliases: blanks-around-lists
This rule is triggered when lists (of any kind) are either not preceded or not followed by a blank line:
Some text
* Some
* List
1. Some
2. List
Some text
To fix this, ensure that all lists have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
* Some
* List
1. Some
2. List
Some text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse lists that don't have blank lines before and after them.
Note: List items without hanging indents are a violation of this rule; list items with hanging indents are okay:
* This is
not okay
* This is
okay
Lists should be surrounded by blank lines Open
* 0.4.2 updated the gem description to include a deprecation message to
- Read upRead up
- Exclude checks
MD032 - Lists should be surrounded by blank lines
Tags: bullet, ul, ol, blank_lines
Aliases: blanks-around-lists
This rule is triggered when lists (of any kind) are either not preceded or not followed by a blank line:
Some text
* Some
* List
1. Some
2. List
Some text
To fix this, ensure that all lists have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
* Some
* List
1. Some
2. List
Some text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse lists that don't have blank lines before and after them.
Note: List items without hanging indents are a violation of this rule; list items with hanging indents are okay:
* This is
not okay
* This is
okay
Line length Open
[![Gem Version](https://badge.fury.io/rb/password_blocklist.svg)](http://badge.fury.io/rb/password_blocklist) ![License](https://img.shields.io/badge/license-MIT-blue.svg)
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
The blocklist file is loaded on every call to `PasswordBlocklist.blocklisted?`. Use `PasswordBlocklist::Checker` to persist the blocklist in memory (approximately 0.8MB) if you would like to perform lots of password tests in quick succession.
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Fenced code blocks should be surrounded by blank lines Open
```
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Line length Open
This Code of Conduct is adapted from the [Contributor Covenant][homepage], version 1.4,
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Lists should be surrounded by blank lines Open
* The use of sexualized language or imagery and unwelcome sexual attention or
- Read upRead up
- Exclude checks
MD032 - Lists should be surrounded by blank lines
Tags: bullet, ul, ol, blank_lines
Aliases: blanks-around-lists
This rule is triggered when lists (of any kind) are either not preceded or not followed by a blank line:
Some text
* Some
* List
1. Some
2. List
Some text
To fix this, ensure that all lists have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
* Some
* List
1. Some
2. List
Some text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse lists that don't have blank lines before and after them.
Note: List items without hanging indents are a violation of this rule; list items with hanging indents are okay:
* This is
not okay
* This is
okay
Line length Open
To release a new version, update the version number in `version.rb`, and then run `bundle exec rake release`, which will create a git tag for the version, push git commits and tags, and push the `.gem` file to [rubygems.org](https://rubygems.org).
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Ordered list item prefix Open
2. Create your feature branch (`git checkout -b my-new-feature`)
- Read upRead up
- Exclude checks
MD029 - Ordered list item prefix
Tags: ol
Aliases: ol-prefix
Parameters: style ("one", "ordered"; default "one")
This rule is triggered on ordered lists that do not either start with '1.' or do not have a prefix that increases in numerical order (depending on the configured style, which defaults to 'one').
Example valid list if the style is configured as 'one':
1. Do this.
1. Do that.
1. Done.
Example valid list if the style is configured as 'ordered':
1. Do this.
2. Do that.
3. Done.
Headers should be surrounded by blank lines Open
0.1.0.pre / 2017-01-20
- Read upRead up
- Exclude checks
MD022 - Headers should be surrounded by blank lines
Tags: headers, blank_lines
Aliases: blanks-around-headers
This rule is triggered when headers (any style) are either not preceded or not followed by a blank line:
# Header 1
Some text
Some more text
## Header 2
To fix this, ensure that all headers have a blank line both before and after (except where the header is at the beginning or end of the document):
# Header 1
Some text
Some more text
## Header 2
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse headers that don't have a blank line before, and will parse them as regular text.
Lists should be surrounded by blank lines Open
* Support different sized blocklists as an option. Thanks roberttravispierce!
- Read upRead up
- Exclude checks
MD032 - Lists should be surrounded by blank lines
Tags: bullet, ul, ol, blank_lines
Aliases: blanks-around-lists
This rule is triggered when lists (of any kind) are either not preceded or not followed by a blank line:
Some text
* Some
* List
1. Some
2. List
Some text
To fix this, ensure that all lists have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
* Some
* List
1. Some
2. List
Some text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse lists that don't have blank lines before and after them.
Note: List items without hanging indents are a violation of this rule; list items with hanging indents are okay:
* This is
not okay
* This is
okay
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Line length Open
's [Probable-Wordlists](https://github.com/berzerk0/Probable-Wordlists)). Different sized lists are
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
Pass a `list_size` parameter to select a different list than the default (medium) size
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.