Sign upLogin

gitcoinco/code_fund_ads

View on GitHub
Star

Showing 211 of 211 total issues

Method validate_status_change has a Cognitive Complexity of 6 (exceeds 5 allowed). Consider refactoring.
Open

  def validate_status_change
    return unless status_changed?
    return unless campaigns.exists?

    if !active? && campaigns.where(status: ENUMS::CAMPAIGN_STATUSES::ACTIVE).exists?
Severity: Minor
Found in app/models/creative.rb - About 25 mins to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Method authorize_assigned_fallback_campaign_ids has a Cognitive Complexity of 6 (exceeds 5 allowed). Consider refactoring.
Open

  def authorize_assigned_fallback_campaign_ids(property)
    return unless property.assigned_fallback_campaign_ids.present?
    campaigns = Campaign.where(id: property.assigned_fallback_campaign_ids)
    property.assigned_fallback_campaign_ids = campaigns.each_with_object([]) { |campaign, memo|
      next unless authorized_user.can_assign_property_to_campaign?(property, campaign)
Severity: Minor
Found in app/controllers/properties_controller.rb - About 25 mins to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Method perform has a Cognitive Complexity of 6 (exceeds 5 allowed). Consider refactoring.
Open

  def perform(campaign_id, property_id, ip_address, user_agent, clicked_at_string)
    ScoutApm::Transaction.ignore! if rand > (ENV["SCOUT_SAMPLE_RATE"] || 1).to_f
    campaign = Campaign.find_by(id: campaign_id)
    return unless campaign&.sponsor?
Severity: Minor
Found in app/jobs/create_impression_and_click_job.rb - About 25 mins to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Method perform has a Cognitive Complexity of 6 (exceeds 5 allowed). Consider refactoring.
Open

  def perform(property_id, advertiser_id)
    ScoutApm::Transaction.ignore! if rand > (ENV["SCOUT_SAMPLE_RATE"] || 1).to_f

    property = Property.find_by(id: property_id)
    return unless property
Severity: Minor
Found in app/jobs/set_property_advertiser_job.rb - About 25 mins to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Method perform has a Cognitive Complexity of 6 (exceeds 5 allowed). Consider refactoring.
Open

  def perform(campaign: nil, previous_status: nil, user: nil)
    @campaign = campaign
    @user = user
    return unless @campaign && @user && previous_status
    return unless previous_status != ENUMS::CAMPAIGN_STATUSES::PAUSED && @campaign.status == ENUMS::CAMPAIGN_STATUSES::PAUSED
Severity: Minor
Found in app/jobs/paused_campaign_notification_job.rb - About 25 mins to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Method daily_clicks_counts has a Cognitive Complexity of 6 (exceeds 5 allowed). Consider refactoring.
Open

  def daily_clicks_counts(start_date = nil, end_date = nil, scoped_by: nil, fresh: false)
    start_date = Date.coerce(start_date)
    end_date = Date.coerce(end_date || start_date)
    key = "#{cache_key}/#{__method__}/#{start_date.iso8601}-#{end_date.iso8601}/#{scoped_by&.cache_key}"
    fetch_from_cache key, force: fresh do
Severity: Minor
Found in app/models/concerns/impressionable.rb - About 25 mins to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

  def perform(start_date = nil, end_date = nil)
    start_date = Date.coerce(start_date || 7.days.ago.to_date)
    end_date = Date.coerce(end_date || 1.day.ago.to_date)
    ensure_daily_summaries_for_campaigns start_date, end_date
    ensure_daily_summaries_for_properties start_date, end_date
Severity: Minor
Found in app/jobs/ensure_daily_summaries_job.rb and 1 other location - About 25 mins to fix
app/jobs/ensure_scoped_daily_summaries_job.rb on lines 4..8

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 30.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

  def perform(start_date = nil, end_date = nil)
    start_date = Date.coerce(start_date || 7.days.ago.to_date)
    end_date = Date.coerce(end_date || 1.day.ago.to_date)
    ensure_daily_summaries_for_campaigns start_date, end_date
    ensure_daily_summaries_for_properties start_date, end_date
Severity: Minor
Found in app/jobs/ensure_scoped_daily_summaries_job.rb and 1 other location - About 25 mins to fix
app/jobs/ensure_daily_summaries_job.rb on lines 4..8

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 30.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

  scope :between, ->(start_date, end_date = nil) {
    start_date, end_date = range_boundary(start_date) if start_date.is_a?(Range)
    where displayed_at_date: Date.coerce(start_date)..Date.coerce(end_date)
  }
Severity: Minor
Found in app/models/daily_summary_report.rb and 3 other locations - About 25 mins to fix
app/models/daily_summary.rb on lines 64..67
app/models/impression.rb on lines 75..78
app/models/organization_transaction.rb on lines 47..50

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        if audiences.present?
          relation = relation
            .where(properties: {audience_id: audiences.map(&:id)})
            .joins(
              arel_table.join(Property.arel_table).on(
Severity: Minor
Found in app/models/daily_summary.rb and 1 other location - About 25 mins to fix
app/models/daily_summary.rb on lines 105..110

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

  scope :between, ->(start_date, end_date = nil) {
    start_date, end_date = range_boundary(start_date) if start_date.is_a?(Range)
    where displayed_at_date: Date.coerce(start_date)..Date.coerce(end_date)
  }
Severity: Minor
Found in app/models/daily_summary.rb and 3 other locations - About 25 mins to fix
app/models/daily_summary_report.rb on lines 79..82
app/models/impression.rb on lines 75..78
app/models/organization_transaction.rb on lines 47..50

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  def destroy
    @report = @organization.scheduled_organization_reports.find(params[:id])
    @report.destroy
    respond_to do |format|
      format.html { redirect_to organization_reports_path(@organization), notice: "Schedule was successfully destroyed." }
Severity: Minor
Found in app/controllers/scheduled_organization_reports_controller.rb and 1 other location - About 25 mins to fix
app/controllers/organization_reports_controller.rb on lines 62..67

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        if audiences.present?
          relation = relation
            .where(properties: {audience_id: audiences.map(&:id)})
            .joins(
              arel_table.join(Property.arel_table).on(
Severity: Minor
Found in app/models/daily_summary.rb and 1 other location - About 25 mins to fix
app/models/daily_summary.rb on lines 147..152

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  def destroy
    @organization_report = @organization.organization_reports.find(params[:id])
    @organization_report.destroy
    respond_to do |format|
      format.html { redirect_to organization_reports_path(@organization), notice: "Report was successfully destroyed." }
Severity: Minor
Found in app/controllers/organization_reports_controller.rb and 1 other location - About 25 mins to fix
app/controllers/scheduled_organization_reports_controller.rb on lines 19..24

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

  scope :between, ->(start_date, end_date = nil) {
    start_date, end_date = range_boundary(start_date) if start_date.is_a?(Range)
    where displayed_at_date: Date.coerce(start_date)..Date.coerce(end_date)
  }
Severity: Minor
Found in app/models/impression.rb and 3 other locations - About 25 mins to fix
app/models/daily_summary.rb on lines 64..67
app/models/daily_summary_report.rb on lines 79..82
app/models/organization_transaction.rb on lines 47..50

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

  scope :posted_between, ->(start_date, end_date = nil) {
    start_date, end_date = range_boundary(start_date) if start_date.is_a?(Range)
    where posted_at: Date.coerce(start_date)..Date.coerce(end_date)
  }
Severity: Minor
Found in app/models/organization_transaction.rb and 3 other locations - About 25 mins to fix
app/models/daily_summary.rb on lines 64..67
app/models/daily_summary_report.rb on lines 79..82
app/models/impression.rb on lines 75..78

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

    def creative_worksheet(workbook, start = nil, stop = nil)
      workbook.create_worksheet(name: "Creative").tap do |worksheet|
        creative_report(start, stop).each_with_index do |row, index|
          worksheet.row(index).concat prepare_row_for_download(row)
Severity: Minor
Found in app/models/concerns/campaigns/reportable.rb and 3 other locations - About 15 mins to fix
app/models/concerns/campaigns/reportable.rb on lines 44..47
app/models/concerns/campaigns/reportable.rb on lines 138..141
app/models/concerns/campaigns/reportable.rb on lines 181..184

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 26.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

    def country_code_worksheet(workbook, start = nil, stop = nil)
      workbook.create_worksheet(name: "Country").tap do |worksheet|
        country_code_report(start, stop).each_with_index do |row, index|
          worksheet.row(index).concat prepare_row_for_download(row)
Severity: Minor
Found in app/models/concerns/campaigns/reportable.rb and 3 other locations - About 15 mins to fix
app/models/concerns/campaigns/reportable.rb on lines 44..47
app/models/concerns/campaigns/reportable.rb on lines 89..92
app/models/concerns/campaigns/reportable.rb on lines 138..141

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 26.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    GenerateOrganizationReportJob.perform_later(
      id: report.id,
      report_url: Rails.application.routes.url_helpers.organization_report_url(organization_id: scheduled_report.organization_id, id: report.id, host: ENV["DEFAULT_HOST"]),
      recipients: scheduled_report.recipients
    )
Severity: Minor
Found in app/jobs/schedule_organization_report_job.rb and 1 other location - About 15 mins to fix
app/jobs/create_organization_report_job.rb on lines 11..15

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 26.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

    def daily_worksheet(workbook, start = nil, stop = nil)
      workbook.create_worksheet(name: "Daily").tap do |worksheet|
        daily_report(start, stop).each_with_index do |row, index|
          worksheet.row(index).concat prepare_row_for_download(row)
Severity: Minor
Found in app/models/concerns/campaigns/reportable.rb and 3 other locations - About 15 mins to fix
app/models/concerns/campaigns/reportable.rb on lines 89..92
app/models/concerns/campaigns/reportable.rb on lines 138..141
app/models/concerns/campaigns/reportable.rb on lines 181..184

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 26.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language