Method has too many lines. [18/15] Open
def create(opts)
req = RingCentralSdk::REST::Request::Fax.new
meta = {}
skip = {text: 1, files: 1}
- Read upRead up
- Exclude checks
This cop checks if the length of a method exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.
Method create
has a Cognitive Complexity of 8 (exceeds 5 allowed). Consider refactoring. Open
def create(opts)
req = RingCentralSdk::REST::Request::Fax.new
meta = {}
skip = {text: 1, files: 1}
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Similar blocks of code found in 2 locations. Consider refactoring. Open
if opts.key? :media
if opts[:media].is_a? String
req.add_file opts[:media]
elsif opts[:media].is_a? Array
req.add_files opts[:media]
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 26.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
if opts.key? :files
if opts[:files].is_a? String
req.add_file opts[:files]
elsif opts[:files].is_a? Array
req.add_files opts[:files]
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 26.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Use 2 spaces for indentation in a hash, relative to the first position after the preceding left parenthesis. Open
to: opts[:to],
- Read upRead up
- Exclude checks
This cops checks the indentation of the first key in a hash literal where the opening brace and the first key are on separate lines. The other keys' indentations are handled by the AlignHash cop.
By default, Hash literals that are arguments in a method call with parentheses, and where the opening curly brace of the hash is on the same line as the opening parenthesis of the method call, shall have their first key indented one step (two spaces) more than the position inside the opening parenthesis.
Other hash literals shall have their first key indented one step more than the start of the line where the opening curly brace is.
This default style is called 'specialinsideparentheses'. Alternative styles are 'consistent' and 'align_braces'. Here are examples:
Example: EnforcedStyle: specialinsideparentheses (default)
# The `special_inside_parentheses` style enforces that the first key
# in a hash literal where the opening brace and the first key are on
# separate lines is indented one step (two spaces) more than the
# position inside the opening parentheses.
# bad
hash = {
key: :value
}
and_in_a_method_call({
no: :difference
})
# good
special_inside_parentheses
hash = {
key: :value
}
but_in_a_method_call({
its_like: :this
})
Example: EnforcedStyle: consistent
# The `consistent` style enforces that the first key in a hash
# literal where the opening brace and the first key are on
# seprate lines is indented the same as a hash literal which is not
# defined inside a method call.
# bad
hash = {
key: :value
}
but_in_a_method_call({
its_like: :this
})
# good
hash = {
key: :value
}
and_in_a_method_call({
no: :difference
})
Example: EnforcedStyle: align_braces
# The `align_brackets` style enforces that the opening and closing
# braces are indented to the same position.
# bad
and_now_for_something = {
completely: :different
}
# good
and_now_for_something = {
completely: :different
}
Indent the right brace the same as the first position after the preceding left parenthesis. Open
})
- Read upRead up
- Exclude checks
This cops checks the indentation of the first key in a hash literal where the opening brace and the first key are on separate lines. The other keys' indentations are handled by the AlignHash cop.
By default, Hash literals that are arguments in a method call with parentheses, and where the opening curly brace of the hash is on the same line as the opening parenthesis of the method call, shall have their first key indented one step (two spaces) more than the position inside the opening parenthesis.
Other hash literals shall have their first key indented one step more than the start of the line where the opening curly brace is.
This default style is called 'specialinsideparentheses'. Alternative styles are 'consistent' and 'align_braces'. Here are examples:
Example: EnforcedStyle: specialinsideparentheses (default)
# The `special_inside_parentheses` style enforces that the first key
# in a hash literal where the opening brace and the first key are on
# separate lines is indented one step (two spaces) more than the
# position inside the opening parentheses.
# bad
hash = {
key: :value
}
and_in_a_method_call({
no: :difference
})
# good
special_inside_parentheses
hash = {
key: :value
}
but_in_a_method_call({
its_like: :this
})
Example: EnforcedStyle: consistent
# The `consistent` style enforces that the first key in a hash
# literal where the opening brace and the first key are on
# seprate lines is indented the same as a hash literal which is not
# defined inside a method call.
# bad
hash = {
key: :value
}
but_in_a_method_call({
its_like: :this
})
# good
hash = {
key: :value
}
and_in_a_method_call({
no: :difference
})
Example: EnforcedStyle: align_braces
# The `align_brackets` style enforces that the opening and closing
# braces are indented to the same position.
# bad
and_now_for_something = {
completely: :different
}
# good
and_now_for_something = {
completely: :different
}
Favor modifier if
usage when having a single-line body. Another good alternative is the usage of control flow &&
/||
. Open
if opts.key? :text
- Read upRead up
- Exclude checks
Checks for if and unless statements that would fit on one line
if written as a modifier if/unless. The maximum line length is
configured in the Metrics/LineLength
cop.
Example:
# bad
if condition
do_stuff(bar)
end
unless qux.empty?
Foo.do_something
end
# good
do_stuff(bar) if condition
Foo.do_something unless qux.empty?
Space inside } missing. Open
skip = {text: 1, files: 1}
- Read upRead up
- Exclude checks
Checks that braces used for hash literals have or don't have surrounding space depending on configuration.
Example: EnforcedStyle: space
# The `space` style enforces that hash literals have
# surrounding space.
# bad
h = {a: 1, b: 2}
# good
h = { a: 1, b: 2 }
Example: EnforcedStyle: no_space
# The `no_space` style enforces that hash literals have
# no surrounding space.
# bad
h = { a: 1, b: 2 }
# good
h = {a: 1, b: 2}
Example: EnforcedStyle: compact
# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.
# bad
h = { a: { b: 2 } }
# good
h = { a: { b: 2 }}
Space missing after comma. Open
opts.each do |k,v|
- Read upRead up
- Exclude checks
Checks for comma (,) not followed by some kind of space.
Example:
# bad
[1,2]
{ foo:bar,}
# good
[1, 2]
{ foo:bar, }
Redundant curly braces around a hash parameter. Open
req.add_metadata({
to: opts[:to],
from: opts[:from],
text: opts[:text]
})
- Read upRead up
- Exclude checks
This cop checks for braces around the last parameter in a method call
if the last parameter is a hash.
It supports braces
, no_braces
and context_dependent
styles.
Example: EnforcedStyle: braces
# The `braces` style enforces braces around all method
# parameters that are hashes.
# bad
some_method(x, y, a: 1, b: 2)
# good
some_method(x, y, {a: 1, b: 2})
Example: EnforcedStyle: no_braces (default)
# The `no_braces` style checks that the last parameter doesn't
# have braces around it.
# bad
some_method(x, y, {a: 1, b: 2})
# good
some_method(x, y, a: 1, b: 2)
Example: EnforcedStyle: context_dependent
# The `context_dependent` style checks that the last parameter
# doesn't have braces around it, but requires braces if the
# second to last parameter is also a hash literal.
# bad
some_method(x, y, {a: 1, b: 2})
some_method(x, y, {a: 1, b: 2}, a: 1, b: 2)
# good
some_method(x, y, a: 1, b: 2)
some_method(x, y, {a: 1, b: 2}, {a: 1, b: 2})
Space inside { missing. Open
skip = {text: 1, files: 1}
- Read upRead up
- Exclude checks
Checks that braces used for hash literals have or don't have surrounding space depending on configuration.
Example: EnforcedStyle: space
# The `space` style enforces that hash literals have
# surrounding space.
# bad
h = {a: 1, b: 2}
# good
h = { a: 1, b: 2 }
Example: EnforcedStyle: no_space
# The `no_space` style enforces that hash literals have
# no surrounding space.
# bad
h = { a: 1, b: 2 }
# good
h = {a: 1, b: 2}
Example: EnforcedStyle: compact
# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.
# bad
h = { a: { b: 2 } }
# good
h = { a: { b: 2 }}