Sign upLogin

guimc233/lgz-bot

View on GitHub
Star

Showing 148 of 148 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                            "拒绝" -> {
                                event.ignore()
                                RequestUtils.Group.remove(id)
                                sendMessage("已拒绝")
                                ListeningStatus.STOPPED
Severity: Minor
Found in src/main/kotlin/ltd/guimc/lgzbot/command/ReviewCommand.kt and 1 other location - About 35 mins to fix
src/main/kotlin/ltd/guimc/lgzbot/command/ReviewCommand.kt on lines 47..52

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 67.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                            "同意" -> {
                                event.accept()
                                RequestUtils.Group.remove(id)
                                sendMessage("已同意")
                                ListeningStatus.STOPPED
Severity: Minor
Found in src/main/kotlin/ltd/guimc/lgzbot/command/ReviewCommand.kt and 1 other location - About 35 mins to fix
src/main/kotlin/ltd/guimc/lgzbot/command/ReviewCommand.kt on lines 54..59

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 67.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    fun getOnebotServiceProviderName(bot: Bot): String {
        if (!checkOverflowCore()) return "null"
        return bot.asRemoteBot.appName
    }
Severity: Minor
Found in src/main/kotlin/ltd/guimc/lgzbot/utils/OverflowUtils.kt and 1 other location - About 35 mins to fix
src/main/kotlin/ltd/guimc/lgzbot/utils/OverflowUtils.kt on lines 30..33

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 67.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

        GithubWebhookSubData.sub[bot!!.id]!![repo]!!.add(subject!!.id)
Severity: Major
Found in src/main/kotlin/ltd/guimc/lgzbot/command/GithubWebhookSubCommand.kt and 3 other locations - About 35 mins to fix
src/main/kotlin/ltd/guimc/lgzbot/command/GithubWebhookSubCommand.kt on lines 25..25
src/main/kotlin/ltd/guimc/lgzbot/command/GithubWebhookSubCommand.kt on lines 45..45
src/main/kotlin/ltd/guimc/lgzbot/command/GithubWebhookSubCommand.kt on lines 50..50

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 4 locations. Consider refactoring.
Open

        for (AbstractLayer layer : layers) {
            layer.training = false;
            layer.input = input;
            layer.forward();
            input = layer.output;
Severity: Major
Found in src/main/java/huzpsb/ll4j/model/Model.java and 3 other locations - About 35 mins to fix
src/main/java/huzpsb/ll4j/model/Model.java on lines 148..153
src/main/java/huzpsb/ll4j/model/Model.java on lines 161..166
src/main/java/huzpsb/ll4j/model/Model.java on lines 187..192

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 46.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

        if (GithubWebhookSubData.sub[bot!!.id]!![repo]!!.indexOf(subject!!.id) != -1) {
Severity: Major
Found in src/main/kotlin/ltd/guimc/lgzbot/command/GithubWebhookSubCommand.kt and 3 other locations - About 35 mins to fix
src/main/kotlin/ltd/guimc/lgzbot/command/GithubWebhookSubCommand.kt on lines 30..30
src/main/kotlin/ltd/guimc/lgzbot/command/GithubWebhookSubCommand.kt on lines 45..45
src/main/kotlin/ltd/guimc/lgzbot/command/GithubWebhookSubCommand.kt on lines 50..50

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 4 locations. Consider refactoring.
Open

        for (AbstractLayer layer : layers) {
            layer.training = false;
            layer.input = input;
            layer.forward();
            input = layer.output;
Severity: Major
Found in src/main/java/huzpsb/ll4j/model/Model.java and 3 other locations - About 35 mins to fix
src/main/java/huzpsb/ll4j/model/Model.java on lines 148..153
src/main/java/huzpsb/ll4j/model/Model.java on lines 176..181
src/main/java/huzpsb/ll4j/model/Model.java on lines 187..192

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 46.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 4 locations. Consider refactoring.
Open

        for (AbstractLayer layer : layers) {
            layer.training = false;
            layer.input = input;
            layer.forward();
            input = layer.output;
Severity: Major
Found in src/main/java/huzpsb/ll4j/model/Model.java and 3 other locations - About 35 mins to fix
src/main/java/huzpsb/ll4j/model/Model.java on lines 161..166
src/main/java/huzpsb/ll4j/model/Model.java on lines 176..181
src/main/java/huzpsb/ll4j/model/Model.java on lines 187..192

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 46.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

        if (GithubWebhookSubData.sub[bot!!.id]!![repo]!!.indexOf(subject!!.id) == -1) {
Severity: Major
Found in src/main/kotlin/ltd/guimc/lgzbot/command/GithubWebhookSubCommand.kt and 3 other locations - About 35 mins to fix
src/main/kotlin/ltd/guimc/lgzbot/command/GithubWebhookSubCommand.kt on lines 25..25
src/main/kotlin/ltd/guimc/lgzbot/command/GithubWebhookSubCommand.kt on lines 30..30
src/main/kotlin/ltd/guimc/lgzbot/command/GithubWebhookSubCommand.kt on lines 50..50

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 4 locations. Consider refactoring.
Open

        for (AbstractLayer layer : layers) {
            layer.training = false;
            layer.input = input;
            layer.forward();
            input = layer.output;
Severity: Major
Found in src/main/java/huzpsb/ll4j/model/Model.java and 3 other locations - About 35 mins to fix
src/main/java/huzpsb/ll4j/model/Model.java on lines 148..153
src/main/java/huzpsb/ll4j/model/Model.java on lines 161..166
src/main/java/huzpsb/ll4j/model/Model.java on lines 176..181

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 46.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

        GithubWebhookSubData.sub[bot!!.id]!![repo]!!.remove(subject!!.id)
Severity: Major
Found in src/main/kotlin/ltd/guimc/lgzbot/command/GithubWebhookSubCommand.kt and 3 other locations - About 35 mins to fix
src/main/kotlin/ltd/guimc/lgzbot/command/GithubWebhookSubCommand.kt on lines 25..25
src/main/kotlin/ltd/guimc/lgzbot/command/GithubWebhookSubCommand.kt on lines 30..30
src/main/kotlin/ltd/guimc/lgzbot/command/GithubWebhookSubCommand.kt on lines 45..45

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            } else if (timestamp.epochSecond - spammerFucker2[e.sender.id]!! >= 1) {
                spammerFucker[e.sender.id] = 1
                spammerFucker2[e.sender.id] = timestamp.epochSecond
            } else {
Severity: Minor
Found in src/main/kotlin/ltd/guimc/lgzbot/listener/message/MessageFilter.kt and 1 other location - About 35 mins to fix
src/main/kotlin/ltd/guimc/lgzbot/listener/message/MessageFilter.kt on lines 255..258

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 65.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            if (spammerFucker[e.sender.id] == null) {
                spammerFucker[e.sender.id] = 1
                spammerFucker2[e.sender.id] = timestamp.epochSecond
            } else if (timestamp.epochSecond - spammerFucker2[e.sender.id]!! >= 1) {
Severity: Minor
Found in src/main/kotlin/ltd/guimc/lgzbot/listener/message/MessageFilter.kt and 1 other location - About 35 mins to fix
src/main/kotlin/ltd/guimc/lgzbot/listener/message/MessageFilter.kt on lines 258..261

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 65.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Method equals has a Cognitive Complexity of 7 (exceeds 5 allowed). Consider refactoring.
Open

    @Override
    public boolean equals(Object o) {
        if (this == o) return true;
        if (o == null || getClass() != o.getClass()) return false;
        TextBlock textBlock = (TextBlock) o;
Severity: Minor
Found in src/main/java/com/benjaminwan/ocrlibrary/TextBlock.java - About 35 mins to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        } catch (ignore: Throwable) {
            sendMessage("Oops, something went wrong.")
            cooldown.addLeftTime(user!!, -10000L)
        }
Severity: Minor
Found in src/main/kotlin/ltd/guimc/lgzbot/command/ACGCommand.kt and 1 other location - About 35 mins to fix
src/main/kotlin/ltd/guimc/lgzbot/command/HttpCatCommand.kt on lines 46..49

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        } catch (ignore: Throwable) {
            sendMessage("Oops, something went wrong.")
            cooldown.addLeftTime(user!!, -10000L)
        }
Severity: Minor
Found in src/main/kotlin/ltd/guimc/lgzbot/command/HttpCatCommand.kt and 1 other location - About 35 mins to fix
src/main/kotlin/ltd/guimc/lgzbot/command/ACGCommand.kt on lines 46..49

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            if (!(e.sender.permission.level < e.group.botPermission.level || ModuleStateConfig.slientmute)) return false
Severity: Minor
Found in src/main/kotlin/ltd/guimc/lgzbot/listener/message/ImageOCRFilter.kt and 1 other location - About 35 mins to fix
src/main/kotlin/ltd/guimc/lgzbot/listener/message/MessageFilter.kt on lines 75..75

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 63.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        if (!(e.sender.permission.level < e.group.botPermission.level || ModuleStateConfig.slientmute)) return
Severity: Minor
Found in src/main/kotlin/ltd/guimc/lgzbot/listener/message/MessageFilter.kt and 1 other location - About 35 mins to fix
src/main/kotlin/ltd/guimc/lgzbot/listener/message/ImageOCRFilter.kt on lines 90..90

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 63.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                "source" -> if (source != -1L) At(source) else PlainText("source")
Severity: Minor
Found in src/main/kotlin/ltd/guimc/lgzbot/listener/multi/BakaListener.kt and 1 other location - About 30 mins to fix
src/main/kotlin/ltd/guimc/lgzbot/listener/multi/BakaListener.kt on lines 113..113

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 62.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                "target" -> if (target != -1L) At(target) else PlainText("target")
Severity: Minor
Found in src/main/kotlin/ltd/guimc/lgzbot/listener/multi/BakaListener.kt and 1 other location - About 30 mins to fix
src/main/kotlin/ltd/guimc/lgzbot/listener/multi/BakaListener.kt on lines 112..112

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 62.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language