hackedteam/core-blackberry

View on GitHub
bb-tools/proguard4.7/src/proguard/classfile/instruction/Instruction.java

Summary

Maintainability
F
4 days
Test Coverage

File Instruction.java has 779 lines of code (exceeds 250 allowed). Consider refactoring.
Open

/*
 * ProGuard -- shrinking, optimization, obfuscation, and preverification
 *             of Java bytecode.
 *
 * Copyright (c) 2002-2011 Eric Lafortune (eric@graphics.cornell.edu)

    Instruction has 28 methods (exceeds 20 allowed). Consider refactoring.
    Open

    public abstract class Instruction
    {
        // An array for marking Category 2 instructions.
        private static final boolean[] IS_CATEGORY2 = new boolean[]
        {

      Method accept has 5 arguments (exceeds 4 allowed). Consider refactoring.
      Open

          public abstract void accept(Clazz clazz, Method method, CodeAttribute codeAttribute, int offset, InstructionVisitor instructionVisitor);
      Severity: Minor
      Found in bb-tools/proguard4.7/src/proguard/classfile/instruction/Instruction.java - About 35 mins to fix

        Similar blocks of code found in 2 locations. Consider refactoring.
        Open

            private static final int[] STACK_POP_COUNTS = new int[]
            {
                0, // nop
                0, // aconst_null
                0, // iconst_m1
        bb-tools/proguard4.7/src/proguard/classfile/instruction/Instruction.java on lines 453..657

        Duplicated Code

        Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

        Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

        When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

        Tuning

        This issue has a mass of 414.

        We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

        The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

        If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

        See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

        Refactorings

        Further Reading

        Similar blocks of code found in 2 locations. Consider refactoring.
        Open

            private static final int[] STACK_PUSH_COUNTS = new int[]
            {
                0, // nop
                1, // aconst_null
                1, // iconst_m1
        bb-tools/proguard4.7/src/proguard/classfile/instruction/Instruction.java on lines 244..448

        Duplicated Code

        Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

        Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

        When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

        Tuning

        This issue has a mass of 414.

        We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

        The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

        If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

        See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

        Refactorings

        Further Reading

        Similar blocks of code found in 2 locations. Consider refactoring.
        Open

            protected static void writeSignedValue(byte[] code, int offset, int value, int valueSize)
            {
                switch (valueSize)
                {
                    case 0:                                        break;
        bb-tools/proguard4.7/src/proguard/classfile/instruction/Instruction.java on lines 876..886

        Duplicated Code

        Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

        Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

        When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

        Tuning

        This issue has a mass of 81.

        We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

        The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

        If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

        See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

        Refactorings

        Further Reading

        Similar blocks of code found in 2 locations. Consider refactoring.
        Open

            protected static void writeValue(byte[] code, int offset, int value, int valueSize)
            {
                switch (valueSize)
                {
                    case 0:                                  break;
        bb-tools/proguard4.7/src/proguard/classfile/instruction/Instruction.java on lines 909..919

        Duplicated Code

        Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

        Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

        When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

        Tuning

        This issue has a mass of 81.

        We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

        The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

        If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

        See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

        Refactorings

        Further Reading

        Similar blocks of code found in 2 locations. Consider refactoring.
        Open

            protected static int readSignedValue(byte[] code, int offset, int valueSize)
            {
                switch (valueSize)
                {
                    case 0: return 0;
        bb-tools/proguard4.7/src/proguard/classfile/instruction/Instruction.java on lines 812..822

        Duplicated Code

        Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

        Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

        When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

        Tuning

        This issue has a mass of 70.

        We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

        The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

        If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

        See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

        Refactorings

        Further Reading

        Similar blocks of code found in 2 locations. Consider refactoring.
        Open

            protected static int readValue(byte[] code, int offset, int valueSize)
            {
                switch (valueSize)
                {
                    case 0: return 0;
        bb-tools/proguard4.7/src/proguard/classfile/instruction/Instruction.java on lines 835..845

        Duplicated Code

        Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

        Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

        When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

        Tuning

        This issue has a mass of 70.

        We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

        The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

        If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

        See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

        Refactorings

        Further Reading

        There are no issues that match your filters.

        Category
        Status