Sign upLogin

hackedteam/vector-offline2

View on GitHub
Star

Showing 176 of 176 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    def install(self, *args):
        print("Install action...")

        model, rows = self.builder.get_object("treeview-selection1").get_selected_rows()
Severity: Major
Found in offline-linux/offline-install/offline_gui.py and 1 other location - About 1 wk to fix
offline-linux/offline-install/offline_gui.py on lines 2522..2602

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 885.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    def uninstall(self, *args):
        print("Uninstall action...")

        model, rows = self.builder.get_object("treeview-selection1").get_selected_rows()
Severity: Major
Found in offline-linux/offline-install/offline_gui.py and 1 other location - About 1 wk to fix
offline-linux/offline-install/offline_gui.py on lines 2092..2172

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 885.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

File offline_gui.py has 2533 lines of code (exceeds 250 allowed). Consider refactoring.
Open

#!/usr/bin/env python3
#

from gi.repository import Gtk, GObject
import subprocess
Severity: Major
Found in offline-linux/offline-install/offline_gui.py - About 1 wk to fix

    Identical blocks of code found in 2 locations. Consider refactoring.
    Open

                if evidence != []:
                count = 0

                self.builder.get_object("progressbar1").set_fraction(0)
                self.builder.get_object("progressbar1").set_text("0%")
    Severity: Major
    Found in offline-linux/offline-install/offline_gui.py and 1 other location - About 4 days to fix
    offline-linux/offline-install/offline_gui.py on lines 2786..2833

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 490.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Identical blocks of code found in 2 locations. Consider refactoring.
    Open

                if evidence != []:
                count = 0

                self.builder.get_object("progressbar1").set_fraction(0)
                self.builder.get_object("progressbar1").set_text("0%")
    Severity: Major
    Found in offline-linux/offline-install/offline_gui.py and 1 other location - About 4 days to fix
    offline-linux/offline-install/offline_gui.py on lines 3066..3113

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 490.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Function install_linux_backdoor has a Cognitive Complexity of 125 (exceeds 5 allowed). Consider refactoring.
    Open

        def install_linux_backdoor(self, user):
        print("    Try to install the backdoor for " + user + " on Linux system...")

        try:
            ret = subprocess.check_output("mount -t {} /dev/{} /mnt/ 2> /dev/null".format(self.tablin['rootfs'], self.tablin['rootdisk']), shell=True)
    Severity: Minor
    Found in offline-linux/offline-install/offline_gui.py - About 2 days to fix

    Cognitive Complexity

    Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

    A method's cognitive complexity is based on a few simple rules:

    • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
    • Code is considered more complex for each "break in the linear flow of the code"
    • Code is considered more complex when "flow breaking structures are nested"

    Further reading

    Function export_linux_logs has a Cognitive Complexity of 117 (exceeds 5 allowed). Consider refactoring.
    Open

        def export_linux_logs(self, user):
        print("    Try to export logs for " + user + " on Linux system...")
        
        [hex_high_dt, hex_low_dt] = self.ts_unix2win()
    Severity: Minor
    Found in offline-linux/offline-install/offline_gui.py - About 2 days to fix

    Cognitive Complexity

    Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

    A method's cognitive complexity is based on a few simple rules:

    • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
    • Code is considered more complex for each "break in the linear flow of the code"
    • Code is considered more complex when "flow breaking structures are nested"

    Further reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

            if self.tablin['vardisk'] != None:
            try:
                os.mkdir("/mnt3/")
                print("    Create new mnt mount directory [OK] -> /mnt3/")
            except:
    Severity: Major
    Found in offline-linux/offline-install/offline_gui.py and 1 other location - About 1 day to fix
    offline-linux/offline-install/offline_gui.py on lines 1800..1837

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 202.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

            if self.tablin['vardisk'] != None:
            try:
                os.mkdir("/mnt3/")
                print("    Create new mnt mount directory [OK] -> /mnt3/")
            except:
    Severity: Major
    Found in offline-linux/offline-install/offline_gui.py and 1 other location - About 1 day to fix
    offline-linux/offline-install/offline_gui.py on lines 2355..2392

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 202.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Function uninstall_linux_backdoor has a Cognitive Complexity of 90 (exceeds 5 allowed). Consider refactoring.
    Open

        def uninstall_linux_backdoor(self, user):
        print("    Try to uninstall the backdoor for " + user + " on Linux system...")

        try:
            ret = subprocess.check_output("mount -t {} /dev/{} /mnt/ 2> /dev/null".format(self.tablin['rootfs'], self.tablin['rootdisk']), shell=True)
    Severity: Minor
    Found in offline-linux/offline-install/offline_gui.py - About 1 day to fix

    Cognitive Complexity

    Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

    A method's cognitive complexity is based on a few simple rules:

    • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
    • Code is considered more complex for each "break in the linear flow of the code"
    • Code is considered more complex when "flow breaking structures are nested"

    Further reading

    Function check_configfiles has a Cognitive Complexity of 89 (exceeds 5 allowed). Consider refactoring.
    Open

        def check_configfiles(self):
        devs = os.listdir('/dev/')

        print("Searching configuration files in the devices...")
    Severity: Minor
    Found in offline-linux/offline-install/offline_gui.py - About 1 day to fix

    Cognitive Complexity

    Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

    A method's cognitive complexity is based on a few simple rules:

    • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
    • Code is considered more complex for each "break in the linear flow of the code"
    • Code is considered more complex when "flow breaking structures are nested"

    Further reading

    Function check_linux_config has a Cognitive Complexity of 84 (exceeds 5 allowed). Consider refactoring.
    Open

        def check_linux_config(self):
        osproduct = "Linux"
        osversion = ""
        oscode = ""
        osname = ""
    Severity: Minor
    Found in offline-linux/offline-install/offline_gui.py - About 1 day to fix

    Cognitive Complexity

    Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

    A method's cognitive complexity is based on a few simple rules:

    • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
    • Code is considered more complex for each "break in the linear flow of the code"
    • Code is considered more complex when "flow breaking structures are nested"

    Further reading

    Function check_status_linux_users has a Cognitive Complexity of 76 (exceeds 5 allowed). Consider refactoring.
    Open

        def check_status_linux_users(self):
        print("  Check status of Linux users...")

        try:
            ret = subprocess.check_output("mount -t {} /dev/{} /mnt 2> /dev/null".format(self.tablin['rootfs'], self.tablin['rootdisk']), shell=True)
    Severity: Minor
    Found in offline-linux/offline-install/offline_gui.py - About 1 day to fix

    Cognitive Complexity

    Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

    A method's cognitive complexity is based on a few simple rules:

    • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
    • Code is considered more complex for each "break in the linear flow of the code"
    • Code is considered more complex when "flow breaking structures are nested"

    Further reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

                    if i['status'] == True or i['status'] == False:
                    if self.tablin['vardisk'] != None:
                        try:
                            ret = subprocess.check_output("umount /mnt3/ 2> /dev/null", shell=True)
                        except:
    Severity: Major
    Found in offline-linux/offline-install/offline_gui.py and 1 other location - About 1 day to fix
    offline-linux/offline-install/offline_gui.py on lines 2399..2432

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 160.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

                    if i['status'] == None:
                    if self.tablin['vardisk'] != None:
                        try:
                            ret = subprocess.check_output("umount /mnt3/ 2> /dev/null", shell=True)
                        except:
    Severity: Major
    Found in offline-linux/offline-install/offline_gui.py and 1 other location - About 1 day to fix
    offline-linux/offline-install/offline_gui.py on lines 1845..1878

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 160.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

                if self.staosx == True and self.exsosx == True:
                self.builder.get_object("image1").set_from_file(self.tabosx['imgon'])
                self.builder.get_object("label3").set_label("Computer Name: " + self.tabosx['osname'])

                output = "OS Version: " + self.tabosx['osproduct'] + ' ' + self.tabosx['osversion'] + ' ' + self.tabosx['oscode'] + " (" + self.tabosx['osarch'] + "-bit)"
    Severity: Major
    Found in offline-linux/offline-install/offline_gui.py and 1 other location - About 1 day to fix
    offline-linux/offline-install/offline_gui.py on lines 1493..1532

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 146.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

                if self.stalin == True and self.exslin == True:
                self.builder.get_object("image1").set_from_file(self.tablin['imgon'])
                self.builder.get_object("label3").set_label("Computer Name: " + self.tablin['osname'])

                output = "OS Version: " + self.tablin['osproduct']
    Severity: Major
    Found in offline-linux/offline-install/offline_gui.py and 1 other location - About 1 day to fix
    offline-linux/offline-install/offline_gui.py on lines 1458..1489

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 146.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

            if self.tablin['homedisk'] != None:
            try:
                os.mkdir("/mnt2/")
                print("    Create new mnt mount directory [OK] -> /mnt2/")
            except:
    Severity: Major
    Found in offline-linux/offline-install/offline_gui.py and 1 other location - About 1 day to fix
    offline-linux/offline-install/offline_gui.py on lines 1774..1798

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 142.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

            if self.tablin['homedisk'] != None:
            try:
                os.mkdir("/mnt2/")
                print("    Create new mnt mount directory [OK] -> /mnt2/")
            except:
    Severity: Major
    Found in offline-linux/offline-install/offline_gui.py and 1 other location - About 1 day to fix
    offline-linux/offline-install/offline_gui.py on lines 2329..2353

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 142.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Function check_partitions has a Cognitive Complexity of 55 (exceeds 5 allowed). Consider refactoring.
    Open

        def check_partitions(self, svalue):
        devs, hds = self.check_devices()
        parts = []

        if hds == None:
    Severity: Minor
    Found in offline-linux/offline-install/offline_gui.py - About 1 day to fix

    Cognitive Complexity

    Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

    A method's cognitive complexity is based on a few simple rules:

    • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
    • Code is considered more complex for each "break in the linear flow of the code"
    • Code is considered more complex when "flow breaking structures are nested"

    Further reading

    Severity
    Category
    Status
    Source
    Language