Assignment Branch Condition size for update is too high. [19.21/15] Open
def update
@project = Project.find_by_slug!(params[:id])
@project.props.merge! project_attributes.delete(:props) if project_attributes.key?(:props)
- Read upRead up
- Exclude checks
This cop checks that the ABC size of methods is not higher than the configured maximum. The ABC size is based on assignments, branches (method calls), and conditions. See http://c2.com/cgi/wiki?AbcMetric
Similar blocks of code found in 2 locations. Consider refactoring. Open
def create
@project = Project.new(project_attributes)
if @project.save
redirect_to teams_path, notice: 'Project was successfully created.'
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 29.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Use empty lines between method definitions. Open
def show
- Read upRead up
- Exclude checks
This cop checks whether method definitions are separated by one empty line.
NumberOfEmptyLines
can be and integer (e.g. 1 by default) or
an array (e.g. [1, 2]) to specificy a minimum and a maximum of
empty lines.
AllowAdjacentOneLineDefs
can be used to configure is adjacent
one line methods definitions are an offense
Example:
# bad
def a
end
def b
end
Example:
# good
def a
end
def b
end
Indent access modifiers like private
. Open
private
- Read upRead up
- Exclude checks
Modifiers should be indented as deep as method definitions, or as deep as the class/module keyword, depending on configuration.
Example: EnforcedStyle: indent (default)
# bad
class Plumbus
private
def smooth; end
end
# good
class Plumbus
private
def smooth; end
end
Example: EnforcedStyle: outdent
# bad
class Plumbus
private
def smooth; end
end
# good
class Plumbus
private
def smooth; end
end
Extra blank line detected. Open
def retire
- Read upRead up
- Exclude checks
This cops checks for two or more consecutive blank lines.
Example:
# bad - It has two empty lines.
some_method
# one empty line
# two empty lines
some_method
# good
some_method
# one empty line
some_method
Missing top-level class documentation comment. Open
class ProjectsController < ApplicationController
- Read upRead up
- Exclude checks
This cop checks for missing top-level documentation of classes and modules. Classes with no body are exempt from the check and so are namespace modules - modules that have nothing in their bodies except classes, other modules, or constant definitions.
The documentation requirement is annulled if the class or module has a "#:nodoc:" comment next to it. Likewise, "#:nodoc: all" does the same for all its children.
Example:
# bad
class Person
# ...
end
# good
# Description/Explanation of Person class
class Person
# ...
end
Line is too long. [83/80] Open
redirect_to projects_path, notice: "#{@project.name} was successfully retired."
- Exclude checks
Use empty lines between method definitions. Open
def retire
- Read upRead up
- Exclude checks
This cop checks whether method definitions are separated by one empty line.
NumberOfEmptyLines
can be and integer (e.g. 1 by default) or
an array (e.g. [1, 2]) to specificy a minimum and a maximum of
empty lines.
AllowAdjacentOneLineDefs
can be used to configure is adjacent
one line methods definitions are an offense
Example:
# bad
def a
end
def b
end
Example:
# good
def a
end
def b
end
Extra blank line detected. Open
def index
- Read upRead up
- Exclude checks
This cops checks for two or more consecutive blank lines.
Example:
# bad - It has two empty lines.
some_method
# one empty line
# two empty lines
some_method
# good
some_method
# one empty line
some_method
Extra blank line detected. Open
def edit
- Read upRead up
- Exclude checks
This cops checks for two or more consecutive blank lines.
Example:
# bad - It has two empty lines.
some_method
# one empty line
# two empty lines
some_method
# good
some_method
# one empty line
some_method
Use empty lines between method definitions. Open
def update
- Read upRead up
- Exclude checks
This cop checks whether method definitions are separated by one empty line.
NumberOfEmptyLines
can be and integer (e.g. 1 by default) or
an array (e.g. [1, 2]) to specificy a minimum and a maximum of
empty lines.
AllowAdjacentOneLineDefs
can be used to configure is adjacent
one line methods definitions are an offense
Example:
# bad
def a
end
def b
end
Example:
# good
def a
end
def b
end
Extra blank line detected. Open
def create
- Read upRead up
- Exclude checks
This cops checks for two or more consecutive blank lines.
Example:
# bad - It has two empty lines.
some_method
# one empty line
# two empty lines
some_method
# good
some_method
# one empty line
some_method
Extra blank line detected. Open
def convert_maintainers_attributes_to_maintainer_ids
- Read upRead up
- Exclude checks
This cops checks for two or more consecutive blank lines.
Example:
# bad - It has two empty lines.
some_method
# one empty line
# two empty lines
some_method
# good
some_method
# one empty line
some_method
Use the new Ruby 1.9 hash syntax. Open
load_resource :find_by => :slug # will use find_by_permalink!(params[:id])
- Read upRead up
- Exclude checks
This cop checks hash literal syntax.
It can enforce either the use of the class hash rocket syntax or the use of the newer Ruby 1.9 syntax (when applicable).
A separate offense is registered for each problematic pair.
The supported styles are:
- ruby19 - forces use of the 1.9 syntax (e.g.
{a: 1}
) when hashes have all symbols for keys - hash_rockets - forces use of hash rockets for all hashes
- nomixedkeys - simply checks for hashes with mixed syntaxes
- ruby19nomixed_keys - forces use of ruby 1.9 syntax and forbids mixed syntax hashes
Example: EnforcedStyle: ruby19 (default)
# bad
{:a => 2}
{b: 1, :c => 2}
# good
{a: 2, b: 1}
{:c => 2, 'd' => 2} # acceptable since 'd' isn't a symbol
{d: 1, 'e' => 2} # technically not forbidden
Example: EnforcedStyle: hash_rockets
# bad
{a: 1, b: 2}
{c: 1, 'd' => 5}
# good
{:a => 1, :b => 2}
Example: EnforcedStyle: nomixedkeys
# bad
{:a => 1, b: 2}
{c: 1, 'd' => 2}
# good
{:a => 1, :b => 2}
{c: 1, d: 2}
Example: EnforcedStyle: ruby19nomixed_keys
# bad
{:a => 1, :b => 2}
{c: 2, 'd' => 3} # should just use hash rockets
# good
{a: 1, b: 2}
{:c => 3, 'd' => 4}
Use empty lines between method definitions. Open
def create
- Read upRead up
- Exclude checks
This cop checks whether method definitions are separated by one empty line.
NumberOfEmptyLines
can be and integer (e.g. 1 by default) or
an array (e.g. [1, 2]) to specificy a minimum and a maximum of
empty lines.
AllowAdjacentOneLineDefs
can be used to configure is adjacent
one line methods definitions are an offense
Example:
# bad
def a
end
def b
end
Example:
# good
def a
end
def b
end
Line is too long. [94/80] Open
@project.props.merge! project_attributes.delete(:props) if project_attributes.key?(:props)
- Exclude checks
Line is too long. [154/80] Open
params[:project][:maintainer_ids] = attributes.values.select { |attributes| attributes[:_destroy] != "1" }.map { |attributes| attributes[:id].to_i }
- Exclude checks
Use a guard clause instead of wrapping the code inside a conditional expression. Open
if attributes
- Read upRead up
- Exclude checks
Use a guard clause instead of wrapping the code inside a conditional expression
Example:
# bad
def test
if something
work
end
end
# good
def test
return unless something
work
end
# also good
def test
work if something
end
# bad
if something
raise 'exception'
else
ok
end
# good
raise 'exception' if something
ok
Extra blank line detected. Open
def new
- Read upRead up
- Exclude checks
This cops checks for two or more consecutive blank lines.
Example:
# bad - It has two empty lines.
some_method
# one empty line
# two empty lines
some_method
# good
some_method
# one empty line
some_method
Extra blank line detected. Open
def project_attributes
- Read upRead up
- Exclude checks
This cops checks for two or more consecutive blank lines.
Example:
# bad - It has two empty lines.
some_method
# one empty line
# two empty lines
some_method
# good
some_method
# one empty line
some_method
Shadowing outer local variable - attributes
. Open
params[:project][:maintainer_ids] = attributes.values.select { |attributes| attributes[:_destroy] != "1" }.map { |attributes| attributes[:id].to_i }
- Read upRead up
- Exclude checks
This cop looks for use of the same name as outer local variables
for block arguments or block local variables.
This is a mimic of the warning
"shadowing outer local variable - foo" from ruby -cw
.
Example:
# bad
def some_method
foo = 1
2.times do |foo| # shadowing outer `foo`
do_something(foo)
end
end
Example:
# good
def some_method
foo = 1
2.times do |bar|
do_something(bar)
end
end
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
render action: "new"
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Extra blank line detected. Open
end
- Read upRead up
- Exclude checks
This cops checks for two or more consecutive blank lines.
Example:
# bad - It has two empty lines.
some_method
# one empty line
# two empty lines
some_method
# good
some_method
# one empty line
some_method
Use empty lines between method definitions. Open
def edit
- Read upRead up
- Exclude checks
This cop checks whether method definitions are separated by one empty line.
NumberOfEmptyLines
can be and integer (e.g. 1 by default) or
an array (e.g. [1, 2]) to specificy a minimum and a maximum of
empty lines.
AllowAdjacentOneLineDefs
can be used to configure is adjacent
one line methods definitions are an offense
Example:
# bad
def a
end
def b
end
Example:
# good
def a
end
def b
end
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
@title = "Projects"
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Use %i
or %I
for an array of symbols. Open
before_action :convert_maintainers_attributes_to_maintainer_ids, only: [:create, :update]
- Read upRead up
- Exclude checks
This cop can check for array literals made up of symbols that are not using the %i() syntax.
Alternatively, it checks for symbol arrays using the %i() syntax on projects which do not want to use that syntax.
Configuration option: MinSize
If set, arrays with fewer elements than this value will not trigger the
cop. For example, a MinSize of
3` will not enforce a style on an array
of 2 or fewer elements.
Example: EnforcedStyle: percent (default)
# good
%i[foo bar baz]
# bad
[:foo, :bar, :baz]
Example: EnforcedStyle: brackets
# good
[:foo, :bar, :baz]
# bad
%i[foo bar baz]
Extra blank line detected. Open
def show
- Read upRead up
- Exclude checks
This cops checks for two or more consecutive blank lines.
Example:
# bad - It has two empty lines.
some_method
# one empty line
# two empty lines
some_method
# good
some_method
# one empty line
some_method
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
render action: "edit"
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Use empty lines between method definitions. Open
def new
- Read upRead up
- Exclude checks
This cop checks whether method definitions are separated by one empty line.
NumberOfEmptyLines
can be and integer (e.g. 1 by default) or
an array (e.g. [1, 2]) to specificy a minimum and a maximum of
empty lines.
AllowAdjacentOneLineDefs
can be used to configure is adjacent
one line methods definitions are an offense
Example:
# bad
def a
end
def b
end
Example:
# good
def a
end
def b
end
Line is too long. [91/80] Open
before_action :convert_maintainers_attributes_to_maintainer_ids, only: [:create, :update]
- Exclude checks
Extra blank line detected. Open
def destroy
- Read upRead up
- Exclude checks
This cops checks for two or more consecutive blank lines.
Example:
# bad - It has two empty lines.
some_method
# one empty line
# two empty lines
some_method
# good
some_method
# one empty line
some_method
Extra blank line detected. Open
def update
- Read upRead up
- Exclude checks
This cops checks for two or more consecutive blank lines.
Example:
# bad - It has two empty lines.
some_method
# one empty line
# two empty lines
some_method
# good
some_method
# one empty line
some_method
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
params[:project][:maintainer_ids] = attributes.values.select { |attributes| attributes[:_destroy] != "1" }.map { |attributes| attributes[:id].to_i }
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Use empty lines between method definitions. Open
def destroy
- Read upRead up
- Exclude checks
This cop checks whether method definitions are separated by one empty line.
NumberOfEmptyLines
can be and integer (e.g. 1 by default) or
an array (e.g. [1, 2]) to specificy a minimum and a maximum of
empty lines.
AllowAdjacentOneLineDefs
can be used to configure is adjacent
one line methods definitions are an offense
Example:
# bad
def a
end
def b
end
Example:
# good
def a
end
def b
end
Extra blank line detected. Open
private
- Read upRead up
- Exclude checks
This cops checks for two or more consecutive blank lines.
Example:
# bad - It has two empty lines.
some_method
# one empty line
# two empty lines
some_method
# good
some_method
# one empty line
some_method
Shadowing outer local variable - attributes
. Open
params[:project][:maintainer_ids] = attributes.values.select { |attributes| attributes[:_destroy] != "1" }.map { |attributes| attributes[:id].to_i }
- Read upRead up
- Exclude checks
This cop looks for use of the same name as outer local variables
for block arguments or block local variables.
This is a mimic of the warning
"shadowing outer local variable - foo" from ruby -cw
.
Example:
# bad
def some_method
foo = 1
2.times do |foo| # shadowing outer `foo`
do_something(foo)
end
end
Example:
# good
def some_method
foo = 1
2.times do |bar|
do_something(bar)
end
end
Extra empty line detected at class body end. Open
end
- Read upRead up
- Exclude checks
This cops checks if empty lines around the bodies of classes match the configuration.
Example: EnforcedStyle: empty_lines
# good
class Foo
def bar
# ...
end
end
Example: EnforcedStyle: emptylinesexcept_namespace
# good
class Foo
class Bar
# ...
end
end
Example: EnforcedStyle: emptylinesspecial
# good
class Foo
def bar; end
end
Example: EnforcedStyle: noemptylines (default)
# good
class Foo
def bar
# ...
end
end
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
@title = "New Project"
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"