ikuseiGmbH/Goldencobra

This cop checks that the ABC size of methods is not higher than the configured maximum. The ABC size is based on assignments, branches (method calls), and conditions. See http://c2.com/cgi/wiki?AbcMetric

A method with Too Many Statements is any method that has a large number of lines.

Too Many Statements warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements counts +1 for every simple statement in a method and +1 for every statement within a control structure (if, else, case, when, for, while, until, begin, rescue) but it doesn't count the control structure itself.

So the following method would score +6 in Reek's statement-counting algorithm:

def parse(arg, argv, &error)
  if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
    return nil, block, nil                                         # +1
  end
  opt = (val = parse_arg(val, &error))[1]                          # +2
  val = conv_arg(*val)                                             # +3
  if opt and !arg
    argv.shift                                                     # +4
  else
    val[0] = nil                                                   # +5
  end
  val                                                              # +6
end

(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)

Classes and modules are the units of reuse and release. It is therefore considered good practice to annotate every class and module with a brief comment outlining its responsibilities.

Example

Given

class Dummy
  # Do things...
end

Reek would emit the following warning:

test.rb -- 1 warning:
  [1]:Dummy has no descriptive comment (IrresponsibleModule)

Fixing this is simple - just an explaining comment:

# The Dummy class is responsible for ...
class Dummy
  # Do things...
end

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Flog calculates the ABC score for methods. The ABC score is based on assignments, branches (method calls), and conditions.

You can read more about ABC metrics or the flog tool

Flog calculates the ABC score for methods. The ABC score is based on assignments, branches (method calls), and conditions.

You can read more about ABC metrics or the flog tool

Flog calculates the ABC score for methods. The ABC score is based on assignments, branches (method calls), and conditions.

You can read more about ABC metrics or the flog tool

Unused Parameter refers to methods with parameters that are unused in scope of the method.

Having unused parameters in a method is code smell because leaving dead code in a method can never improve the method and it makes the code confusing to read.

Example

Given:

class Klass
  def unused_parameters(x,y,z)
    puts x,y # but not z
  end
end

Reek would emit the following warning:

[2]:Klass#unused_parameters has unused parameter 'z' (UnusedParameters)

An Uncommunicative Variable Name is a variable name that doesn't communicate its intent well enough.

Poor names make it hard for the reader to build a mental picture of what's going on in the code. They can also be mis-interpreted; and they hurt the flow of reading, because the reader must slow down to interpret the names.

An Uncommunicative Variable Name is a variable name that doesn't communicate its intent well enough.

Poor names make it hard for the reader to build a mental picture of what's going on in the code. They can also be mis-interpreted; and they hurt the flow of reading, because the reader must slow down to interpret the names.

An Uncommunicative Variable Name is a variable name that doesn't communicate its intent well enough.

Poor names make it hard for the reader to build a mental picture of what's going on in the code. They can also be mis-interpreted; and they hurt the flow of reading, because the reader must slow down to interpret the names.

An Uncommunicative Variable Name is a variable name that doesn't communicate its intent well enough.

Poor names make it hard for the reader to build a mental picture of what's going on in the code. They can also be mis-interpreted; and they hurt the flow of reading, because the reader must slow down to interpret the names.

An Uncommunicative Variable Name is a variable name that doesn't communicate its intent well enough.

Poor names make it hard for the reader to build a mental picture of what's going on in the code. They can also be mis-interpreted; and they hurt the flow of reading, because the reader must slow down to interpret the names.

This cop identifies places where gsub can be replaced by tr or delete.

Example:

# bad
'abc'.gsub('b', 'd')
'abc'.gsub('a', '')
'abc'.gsub(/a/, 'd')
'abc'.gsub!('a', 'd')

# good
'abc'.gsub(/.*/, 'a')
'abc'.gsub(/a+/, 'd')
'abc'.tr('b', 'd')
'a b c'.delete(' ')

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 46.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Checks that the equals signs in parameter default assignments have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space (default)

# bad
def some_method(arg1=:default, arg2=nil, arg3=[])
  # do something...
end

# good
def some_method(arg1 = :default, arg2 = nil, arg3 = [])
  # do something...
end

Example: EnforcedStyle: no_space

# bad
def some_method(arg1 = :default, arg2 = nil, arg3 = [])
  # do something...
end

# good
def some_method(arg1=:default, arg2=nil, arg3=[])
  # do something...
end

This cop checks the length of lines in the source code. The maximum length is configurable. The tab size is configured in the IndentationWidth of the Layout/Tab cop.

This cop checks the length of lines in the source code. The maximum length is configurable. The tab size is configured in the IndentationWidth of the Layout/Tab cop.

Checks that block braces have or don't have a space before the opening brace depending on configuration.

Example: EnforcedStyle: space (default)

# bad
foo.map{ |a|
  a.bar.to_s
}

# good
foo.map { |a|
  a.bar.to_s
}

Example: EnforcedStyle: no_space

# bad
foo.map { |a|
  a.bar.to_s
}

# good
foo.map{ |a|
  a.bar.to_s
}

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

Checks that brackets used for array literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space

# The `space` style enforces that array literals have
# surrounding space.

# bad
array = [a, b, c, d]

# good
array = [ a, b, c, d ]

Example: EnforcedStyle: no_space (default)

# The `no_space` style enforces that array literals have
# no surrounding space.

# bad
array = [ a, b, c, d ]

# good
array = [a, b, c, d]

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# array brackets, with the exception that successive left
# or right brackets are collapsed together in nested arrays.

# bad
array = [ a, [ b, c ] ]

# good
array = [ a, [ b, c ]]

Example: EnforcedStyleForEmptyBrackets: no_space (default)

# The `no_space` EnforcedStyleForEmptyBrackets style enforces that
# empty array brackets do not contain spaces.

# bad
foo = [ ]
bar = [     ]

# good
foo = []
bar = []

Example: EnforcedStyleForEmptyBrackets: space

# The `space` EnforcedStyleForEmptyBrackets style enforces that
# empty array brackets contain exactly one space.

# bad
foo = []
bar = [    ]

# good
foo = [ ]
bar = [ ]

Checks for spaces inside ordinary round parentheses.

Example: EnforcedStyle: no_space (default)

# The `no_space` style enforces that parentheses do not have spaces.

# bad
f( 3)
g = (a + 3 )

# good
f(3)
g = (a + 3)

Example: EnforcedStyle: space

# The `space` style enforces that parentheses have a space at the
# beginning and end.
# Note: Empty parentheses should not have spaces.

# bad
f(3)
g = (a + 3)
y( )

# good
f( 3 )
g = ( a + 3 )
y()

This cop makes sure that predicates are named properly.

Example:

# bad
def is_even?(value)
end

# good
def even?(value)
end

# bad
def has_value?
end

# good
def value?
end

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

This cop checks the length of lines in the source code. The maximum length is configurable. The tab size is configured in the IndentationWidth of the Layout/Tab cop.

This cop checks the length of lines in the source code. The maximum length is configurable. The tab size is configured in the IndentationWidth of the Layout/Tab cop.

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

Checks that block braces have or don't have a space before the opening brace depending on configuration.

Example: EnforcedStyle: space (default)

# bad
foo.map{ |a|
  a.bar.to_s
}

# good
foo.map { |a|
  a.bar.to_s
}

Example: EnforcedStyle: no_space

# bad
foo.map { |a|
  a.bar.to_s
}

# good
foo.map{ |a|
  a.bar.to_s
}

Checks that braces used for hash literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that hash literals have
# surrounding space.

# bad
h = {a: 1, b: 2}

# good
h = { a: 1, b: 2 }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that hash literals have
# no surrounding space.

# bad
h = { a: 1, b: 2 }

# good
h = {a: 1, b: 2}

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.

# bad
h = { a: { b: 2 } }

# good
h = { a: { b: 2 }}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# empty hash braces do not contain spaces.

# bad
foo = { }
bar = {    }

# good
foo = {}
bar = {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# empty hash braces contain space.

# bad
foo = {}

# good
foo = { }
foo = {  }
foo = {     }

This cop checks the length of lines in the source code. The maximum length is configurable. The tab size is configured in the IndentationWidth of the Layout/Tab cop.

This cop checks ensures source files have no utf-8 encoding comments.

Example:

# bad
# encoding: UTF-8
# coding: UTF-8
# -*- coding: UTF-8 -*-

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

Checks for comma (,) not followed by some kind of space.

Example:

# bad
[1,2]
{ foo:bar,}

# good
[1, 2]
{ foo:bar, }

Checks that block braces have or don't have a space before the opening brace depending on configuration.

Example: EnforcedStyle: space (default)

# bad
foo.map{ |a|
  a.bar.to_s
}

# good
foo.map { |a|
  a.bar.to_s
}

Example: EnforcedStyle: no_space

# bad
foo.map { |a|
  a.bar.to_s
}

# good
foo.map{ |a|
  a.bar.to_s
}

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a space in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: false

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

This cop makes sure that predicates are named properly.

Example:

# bad
def is_even?(value)
end

# good
def even?(value)
end

# bad
def has_value?
end

# good
def value?
end

This cop checks for braces around the last parameter in a method call if the last parameter is a hash. It supports braces, no_braces and context_dependent styles.

Example: EnforcedStyle: braces

# The `braces` style enforces braces around all method
# parameters that are hashes.

# bad
some_method(x, y, a: 1, b: 2)

# good
some_method(x, y, {a: 1, b: 2})

Example: EnforcedStyle: no_braces (default)

# The `no_braces` style checks that the last parameter doesn't
# have braces around it.

# bad
some_method(x, y, {a: 1, b: 2})

# good
some_method(x, y, a: 1, b: 2)

Example: EnforcedStyle: context_dependent

# The `context_dependent` style checks that the last parameter
# doesn't have braces around it, but requires braces if the
# second to last parameter is also a hash literal.

# bad
some_method(x, y, {a: 1, b: 2})
some_method(x, y, {a: 1, b: 2}, a: 1, b: 2)

# good
some_method(x, y, a: 1, b: 2)
some_method(x, y, {a: 1, b: 2}, {a: 1, b: 2})

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a space in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: false

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a space in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: false

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a space in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: false

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

This cop checks for redundant return expressions.

Example:

# These bad cases should be extended to handle methods whose body is
# if/else or a case expression with a default branch.

# bad
def test
  return something
end

# bad
def test
  one
  two
  three
  return something
end

# good
def test
  return something if something_else
end

# good
def test
  if x
  elsif y
  else
  end
end

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

This cops checks for two or more consecutive blank lines.

Example:

# bad - It has two empty lines.
some_method
# one empty line
# two empty lines
some_method

# good
some_method
# one empty line
some_method

This cop checks whether comments have a leading space after the # denoting the start of the comment. The leading space is not required for some RDoc special syntax, like #++, #--, #:nodoc, =begin- and =end comments, "shebang" directives, or rackup options.

Example:

# bad
#Some comment

# good
# Some comment

Checks that block braces have or don't have a space before the opening brace depending on configuration.

Example: EnforcedStyle: space (default)

# bad
foo.map{ |a|
  a.bar.to_s
}

# good
foo.map { |a|
  a.bar.to_s
}

Example: EnforcedStyle: no_space

# bad
foo.map { |a|
  a.bar.to_s
}

# good
foo.map{ |a|
  a.bar.to_s
}

This cop checks the length of lines in the source code. The maximum length is configurable. The tab size is configured in the IndentationWidth of the Layout/Tab cop.

Checks for if and unless statements that would fit on one line if written as a modifier if/unless. The maximum line length is configured in the Metrics/LineLength cop. The tab size is configured in the IndentationWidth of the Layout/Tab cop.

Example:

# bad
if condition
  do_stuff(bar)
end

unless qux.empty?
  Foo.do_something
end

# good
do_stuff(bar) if condition
Foo.do_something unless qux.empty?

This cop checks whether comments have a leading space after the # denoting the start of the comment. The leading space is not required for some RDoc special syntax, like #++, #--, #:nodoc, =begin- and =end comments, "shebang" directives, or rackup options.

Example:

# bad
#Some comment

# good
# Some comment

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

Checks that brackets used for array literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space

# The `space` style enforces that array literals have
# surrounding space.

# bad
array = [a, b, c, d]

# good
array = [ a, b, c, d ]

Example: EnforcedStyle: no_space (default)

# The `no_space` style enforces that array literals have
# no surrounding space.

# bad
array = [ a, b, c, d ]

# good
array = [a, b, c, d]

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# array brackets, with the exception that successive left
# or right brackets are collapsed together in nested arrays.

# bad
array = [ a, [ b, c ] ]

# good
array = [ a, [ b, c ]]

Example: EnforcedStyleForEmptyBrackets: no_space (default)

# The `no_space` EnforcedStyleForEmptyBrackets style enforces that
# empty array brackets do not contain spaces.

# bad
foo = [ ]
bar = [     ]

# good
foo = []
bar = []

Example: EnforcedStyleForEmptyBrackets: space

# The `space` EnforcedStyleForEmptyBrackets style enforces that
# empty array brackets contain exactly one space.

# bad
foo = []
bar = [    ]

# good
foo = [ ]
bar = [ ]

This cop checks the length of lines in the source code. The maximum length is configurable. The tab size is configured in the IndentationWidth of the Layout/Tab cop.

This cop makes sure that predicates are named properly.

Example:

# bad
def is_even?(value)
end

# good
def even?(value)
end

# bad
def has_value?
end

# good
def value?
end

This cop makes sure that predicates are named properly.

Example:

# bad
def is_even?(value)
end

# good
def even?(value)
end

# bad
def has_value?
end

# good
def value?
end

Checks that block braces have or don't have a space before the opening brace depending on configuration.

Example: EnforcedStyle: space (default)

# bad
foo.map{ |a|
  a.bar.to_s
}

# good
foo.map { |a|
  a.bar.to_s
}

Example: EnforcedStyle: no_space

# bad
foo.map { |a|
  a.bar.to_s
}

# good
foo.map{ |a|
  a.bar.to_s
}

Checks that block braces have or don't have a space before the opening brace depending on configuration.

Example: EnforcedStyle: space (default)

# bad
foo.map{ |a|
  a.bar.to_s
}

# good
foo.map { |a|
  a.bar.to_s
}

Example: EnforcedStyle: no_space

# bad
foo.map { |a|
  a.bar.to_s
}

# good
foo.map{ |a|
  a.bar.to_s
}

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

This cop checks whether comments have a leading space after the # denoting the start of the comment. The leading space is not required for some RDoc special syntax, like #++, #--, #:nodoc, =begin- and =end comments, "shebang" directives, or rackup options.

Example:

# bad
#Some comment

# good
# Some comment

Checks that block braces have or don't have a space before the opening brace depending on configuration.

Example: EnforcedStyle: space (default)

# bad
foo.map{ |a|
  a.bar.to_s
}

# good
foo.map { |a|
  a.bar.to_s
}

Example: EnforcedStyle: no_space

# bad
foo.map { |a|
  a.bar.to_s
}

# good
foo.map{ |a|
  a.bar.to_s
}

This cop checks for spaces between -> and opening parameter brace in lambda literals.

Example: EnforcedStyle: requirenospace (default)

# bad
  a = -> (x, y) { x + y }

  # good
  a = ->(x, y) { x + y }

Example: EnforcedStyle: require_space

# bad
  a = ->(x, y) { x + y }

  # good
  a = -> (x, y) { x + y }

Checks that braces used for hash literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that hash literals have
# surrounding space.

# bad
h = {a: 1, b: 2}

# good
h = { a: 1, b: 2 }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that hash literals have
# no surrounding space.

# bad
h = { a: 1, b: 2 }

# good
h = {a: 1, b: 2}

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.

# bad
h = { a: { b: 2 } }

# good
h = { a: { b: 2 }}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# empty hash braces do not contain spaces.

# bad
foo = { }
bar = {    }

# good
foo = {}
bar = {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# empty hash braces contain space.

# bad
foo = {}

# good
foo = { }
foo = {  }
foo = {     }

This cop checks for private or protected access modifiers which are applied to a singleton method. These access modifiers do not make singleton methods private/protected. private_class_method can be used for that.

Example:

# bad

class C
  private

  def self.method
    puts 'hi'
  end
end

Example:

# good

class C
  def self.method
    puts 'hi'
  end

  private_class_method :method
end

Example:

# good

class C
  class << self
    private

    def method
      puts 'hi'
    end
  end
end

This cop checks the length of lines in the source code. The maximum length is configurable. The tab size is configured in the IndentationWidth of the Layout/Tab cop.

This cop checks for missing top-level documentation of classes and modules. Classes with no body are exempt from the check and so are namespace modules - modules that have nothing in their bodies except classes, other modules, or constant definitions.

The documentation requirement is annulled if the class or module has a "#:nodoc:" comment next to it. Likewise, "#:nodoc: all" does the same for all its children.

Example:

# bad
class Person
  # ...
end

# good
# Description/Explanation of Person class
class Person
  # ...
end

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Use symbols as procs when possible.

Example:

# bad
something.map { |s| s.upcase }

# good
something.map(&:upcase)

This cop can check for array literals made up of symbols that are not using the %i() syntax.

Alternatively, it checks for symbol arrays using the %i() syntax on projects which do not want to use that syntax.

Configuration option: MinSize If set, arrays with fewer elements than this value will not trigger the cop. For example, a MinSize of3` will not enforce a style on an array of 2 or fewer elements.

Example: EnforcedStyle: percent (default)

# good
%i[foo bar baz]

# bad
[:foo, :bar, :baz]

Example: EnforcedStyle: brackets

# good
[:foo, :bar, :baz]

# bad
%i[foo bar baz]

Checks for a newline after the final magic comment.

Example:

# good
# frozen_string_literal: true

# Some documentation for Person
class Person
  # Some code
end

# bad
# frozen_string_literal: true
# Some documentation for Person
class Person
  # Some code
end

This cops checks for indentation that doesn't use the specified number of spaces.

See also the IndentationConsistency cop which is the companion to this one.

Example:

# bad
class A
 def test
  puts 'hello'
 end
end

# good
class A
  def test
    puts 'hello'
  end
end

Example: IgnoredPatterns: ['^\s*module']

# bad
module A
class B
  def test
  puts 'hello'
  end
end
end

# good
module A
class B
  def test
    puts 'hello'
  end
end
end

This cop can check for array literals made up of symbols that are not using the %i() syntax.

Alternatively, it checks for symbol arrays using the %i() syntax on projects which do not want to use that syntax.

Configuration option: MinSize If set, arrays with fewer elements than this value will not trigger the cop. For example, a MinSize of3` will not enforce a style on an array of 2 or fewer elements.

Example: EnforcedStyle: percent (default)

# good
%i[foo bar baz]

# bad
[:foo, :bar, :baz]

Example: EnforcedStyle: brackets

# good
[:foo, :bar, :baz]

# bad
%i[foo bar baz]

This cop checks for spaces between -> and opening parameter brace in lambda literals.

Example: EnforcedStyle: requirenospace (default)

# bad
  a = -> (x, y) { x + y }

  # good
  a = ->(x, y) { x + y }

Example: EnforcedStyle: require_space

# bad
  a = ->(x, y) { x + y }

  # good
  a = -> (x, y) { x + y }

This cop checks for unused method arguments.

Example:

# bad

def some_method(used, unused, _unused_but_allowed)
  puts used
end

Example:

# good

def some_method(used, _unused, _unused_but_allowed)
  puts used
end

This cop checks the length of lines in the source code. The maximum length is configurable. The tab size is configured in the IndentationWidth of the Layout/Tab cop.

This cop checks the style of children definitions at classes and modules. Basically there are two different styles:

Example: EnforcedStyle: nested (default)

# good
# have each child on its own line
class Foo
  class Bar
  end
end

Example: EnforcedStyle: compact

# good
# combine definitions as much as possible
class Foo::Bar
end

The compact style is only forced for classes/modules with one child.

Use a guard clause instead of wrapping the code inside a conditional expression

Example:

# bad
def test
  if something
    work
  end
end

# good
def test
  return unless something
  work
end

# also good
def test
  work if something
end

# bad
if something
  raise 'exception'
else
  ok
end

# good
raise 'exception' if something
ok

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

Checks for comma (,) not followed by some kind of space.

Example:

# bad
[1,2]
{ foo:bar,}

# good
[1, 2]
{ foo:bar, }

This cop can check for array literals made up of symbols that are not using the %i() syntax.

Alternatively, it checks for symbol arrays using the %i() syntax on projects which do not want to use that syntax.

Configuration option: MinSize If set, arrays with fewer elements than this value will not trigger the cop. For example, a MinSize of3` will not enforce a style on an array of 2 or fewer elements.

Example: EnforcedStyle: percent (default)

# good
%i[foo bar baz]

# bad
[:foo, :bar, :baz]

Example: EnforcedStyle: brackets

# good
[:foo, :bar, :baz]

# bad
%i[foo bar baz]

This cop checks for unnecessary conditional expressions.

Example:

# bad
a = b ? b : c

# good
a = b || c

Example:

# bad
if b
  b
else
  c
end

# good
b || c

# good
if b
  b
elsif cond
  c
end