This cop checks if the length of a method exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.

This cop checks that the ABC size of methods is not higher than the configured maximum. The ABC size is based on assignments, branches (method calls), and conditions. See http://c2.com/cgi/wiki?AbcMetric

Flog calculates the ABC score for methods. The ABC score is based on assignments, branches (method calls), and conditions.

You can read more about ABC metrics or the flog tool

A method with Too Many Statements is any method that has a large number of lines.

Too Many Statements warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements counts +1 for every simple statement in a method and +1 for every statement within a control structure (if, else, case, when, for, while, until, begin, rescue) but it doesn't count the control structure itself.

So the following method would score +6 in Reek's statement-counting algorithm:

def parse(arg, argv, &error)
  if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
    return nil, block, nil                                         # +1
  end
  opt = (val = parse_arg(val, &error))[1]                          # +2
  val = conv_arg(*val)                                             # +3
  if opt and !arg
    argv.shift                                                     # +4
  else
    val[0] = nil                                                   # +5
  end
  val                                                              # +6
end

(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

• Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
• Code is considered more complex for each "break in the linear flow of the code"
• Code is considered more complex when "flow breaking structures are nested"

Further reading

• Cognitive Complexity docs
• Cognitive Complexity: A new way of measuring understandability

Unused Parameter refers to methods with parameters that are unused in scope of the method.

Having unused parameters in a method is code smell because leaving dead code in a method can never improve the method and it makes the code confusing to read.

Example

Given:

class Klass
  def unused_parameters(x,y,z)
    puts x,y # but not z
  end
end

Reek would emit the following warning:

[2]:Klass#unused_parameters has unused parameter 'z' (UnusedParameters)

Checks that block braces have or don't have a space before the opening brace depending on configuration.

Example: EnforcedStyle: space (default)

# bad
foo.map{ |a|
  a.bar.to_s
}

# good
foo.map { |a|
  a.bar.to_s
}

Example: EnforcedStyle: no_space

# bad
foo.map { |a|
  a.bar.to_s
}

# good
foo.map{ |a|
  a.bar.to_s
}

Checks for comma (,) preceded by space.

Example:

# bad
[1 , 2 , 3]
a(1 , 2)
each { |a , b| }

# good
[1, 2, 3]
a(1, 2)
each { |a, b| }

Checks for comma (,) preceded by space.

Example:

# bad
[1 , 2 , 3]
a(1 , 2)
each { |a , b| }

# good
[1, 2, 3]
a(1, 2)
each { |a, b| }

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

This cop checks ensures source files have no utf-8 encoding comments.

Example:

# bad
# encoding: UTF-8
# coding: UTF-8
# -*- coding: UTF-8 -*-

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

This cop checks that the closing brace in a method call is either on the same line as the last method argument, or a new line.

When using the symmetrical (default) style:

If a method call's opening brace is on the same line as the first argument of the call, then the closing brace should be on the same line as the last argument of the call.

If an method call's opening brace is on the line above the first argument of the call, then the closing brace should be on the line below the last argument of the call.

When using the new_line style:

The closing brace of a multi-line method call must be on the line after the last argument of the call.

When using the same_line style:

The closing brace of a multi-line method call must be on the same line as the last argument of the call.

Example: EnforcedStyle: symmetrical (default)

# bad
foo(a,
  b
)

# bad
foo(
  a,
  b)

# good
foo(a,
  b)

# good
foo(
  a,
  b
)

Example: EnforcedStyle: new_line

# bad
foo(
  a,
  b)

# bad
foo(a,
  b)

# good
foo(a,
  b
)

# good
foo(
  a,
  b
)

Example: EnforcedStyle: same_line

# bad
foo(a,
  b
)

# bad
foo(
  a,
  b
)

# good
foo(
  a,
  b)

# good
foo(a,
  b)

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:

- key (left align keys)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)

The treatment of hashes passed as the last argument to a method call can also be configured. The options are:

- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
- ignore_explicit (with curly braces)

Example: EnforcedHashRocketStyle: key (default)

# bad
{
  :foo => bar,
   :ba => baz
}

# good
{
  :foo => bar,
  :ba => baz
}

Example: EnforcedHashRocketStyle: separator

# bad
{
  :foo => bar,
  :ba => baz
}
{
  :foo => bar,
  :ba  => baz
}

# good
{
  :foo => bar,
   :ba => baz
}

Example: EnforcedHashRocketStyle: table

# bad
{
  :foo => bar,
   :ba => baz
}

# good
{
  :foo => bar,
  :ba  => baz
}

Example: EnforcedColonStyle: key (default)

# bad
{
  foo: bar,
   ba: baz
}

# good
{
  foo: bar,
  ba: baz
}

Example: EnforcedColonStyle: separator

# bad
{
  foo: bar,
  ba: baz
}

# good
{
  foo: bar,
   ba: baz
}

Example: EnforcedColonStyle: table

# bad
{
  foo: bar,
  ba: baz
}

# good
{
  foo: bar,
  ba:  baz
}

Example: EnforcedLastArgumentHashStyle: always_inspect (default)

# Inspect both implicit and explicit hashes.

# bad
do_something(foo: 1,
  bar: 2)

# bad
do_something({foo: 1,
  bar: 2})

# good
do_something(foo: 1,
             bar: 2)

# good
do_something(
  foo: 1,
  bar: 2
)

# good
do_something({foo: 1,
              bar: 2})

# good
do_something({
  foo: 1,
  bar: 2
})

Example: EnforcedLastArgumentHashStyle: always_ignore

# Ignore both implicit and explicit hashes.

# good
do_something(foo: 1,
  bar: 2)

# good
do_something({foo: 1,
  bar: 2})

Example: EnforcedLastArgumentHashStyle: ignore_implicit

# Ignore only implicit hashes.

# bad
do_something({foo: 1,
  bar: 2})

# good
do_something(foo: 1,
  bar: 2)

Example: EnforcedLastArgumentHashStyle: ignore_explicit

# Ignore only explicit hashes.

# bad
do_something(foo: 1,
  bar: 2)

# good
do_something({foo: 1,
  bar: 2})

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:

- key (left align keys)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)

The treatment of hashes passed as the last argument to a method call can also be configured. The options are:

- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
- ignore_explicit (with curly braces)

Example: EnforcedHashRocketStyle: key (default)

# bad
{
  :foo => bar,
   :ba => baz
}

# good
{
  :foo => bar,
  :ba => baz
}

Example: EnforcedHashRocketStyle: separator

# bad
{
  :foo => bar,
  :ba => baz
}
{
  :foo => bar,
  :ba  => baz
}

# good
{
  :foo => bar,
   :ba => baz
}

Example: EnforcedHashRocketStyle: table

# bad
{
  :foo => bar,
   :ba => baz
}

# good
{
  :foo => bar,
  :ba  => baz
}

Example: EnforcedColonStyle: key (default)

# bad
{
  foo: bar,
   ba: baz
}

# good
{
  foo: bar,
  ba: baz
}

Example: EnforcedColonStyle: separator

# bad
{
  foo: bar,
  ba: baz
}

# good
{
  foo: bar,
   ba: baz
}

Example: EnforcedColonStyle: table

# bad
{
  foo: bar,
  ba: baz
}

# good
{
  foo: bar,
  ba:  baz
}

Example: EnforcedLastArgumentHashStyle: always_inspect (default)

# Inspect both implicit and explicit hashes.

# bad
do_something(foo: 1,
  bar: 2)

# bad
do_something({foo: 1,
  bar: 2})

# good
do_something(foo: 1,
             bar: 2)

# good
do_something(
  foo: 1,
  bar: 2
)

# good
do_something({foo: 1,
              bar: 2})

# good
do_something({
  foo: 1,
  bar: 2
})

Example: EnforcedLastArgumentHashStyle: always_ignore

# Ignore both implicit and explicit hashes.

# good
do_something(foo: 1,
  bar: 2)

# good
do_something({foo: 1,
  bar: 2})

Example: EnforcedLastArgumentHashStyle: ignore_implicit

# Ignore only implicit hashes.

# bad
do_something({foo: 1,
  bar: 2})

# good
do_something(foo: 1,
  bar: 2)

Example: EnforcedLastArgumentHashStyle: ignore_explicit

# Ignore only explicit hashes.

# bad
do_something(foo: 1,
  bar: 2)

# good
do_something({foo: 1,
  bar: 2})

Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:

- key (left align keys)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)

The treatment of hashes passed as the last argument to a method call can also be configured. The options are:

- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
- ignore_explicit (with curly braces)

Example: EnforcedHashRocketStyle: key (default)

# bad
{
  :foo => bar,
   :ba => baz
}

# good
{
  :foo => bar,
  :ba => baz
}

Example: EnforcedHashRocketStyle: separator

# bad
{
  :foo => bar,
  :ba => baz
}
{
  :foo => bar,
  :ba  => baz
}

# good
{
  :foo => bar,
   :ba => baz
}

Example: EnforcedHashRocketStyle: table

# bad
{
  :foo => bar,
   :ba => baz
}

# good
{
  :foo => bar,
  :ba  => baz
}

Example: EnforcedColonStyle: key (default)

# bad
{
  foo: bar,
   ba: baz
}

# good
{
  foo: bar,
  ba: baz
}

Example: EnforcedColonStyle: separator

# bad
{
  foo: bar,
  ba: baz
}

# good
{
  foo: bar,
   ba: baz
}

Example: EnforcedColonStyle: table

# bad
{
  foo: bar,
  ba: baz
}

# good
{
  foo: bar,
  ba:  baz
}

Example: EnforcedLastArgumentHashStyle: always_inspect (default)

# Inspect both implicit and explicit hashes.

# bad
do_something(foo: 1,
  bar: 2)

# bad
do_something({foo: 1,
  bar: 2})

# good
do_something(foo: 1,
             bar: 2)

# good
do_something(
  foo: 1,
  bar: 2
)

# good
do_something({foo: 1,
              bar: 2})

# good
do_something({
  foo: 1,
  bar: 2
})

Example: EnforcedLastArgumentHashStyle: always_ignore

# Ignore both implicit and explicit hashes.

# good
do_something(foo: 1,
  bar: 2)

# good
do_something({foo: 1,
  bar: 2})

Example: EnforcedLastArgumentHashStyle: ignore_implicit

# Ignore only implicit hashes.

# bad
do_something({foo: 1,
  bar: 2})

# good
do_something(foo: 1,
  bar: 2)

Example: EnforcedLastArgumentHashStyle: ignore_explicit

# Ignore only explicit hashes.

# bad
do_something(foo: 1,
  bar: 2)

# good
do_something({foo: 1,
  bar: 2})

This cop checks for assignments in the conditions of if/while/until.

Example:

# bad

if some_var = true
  do_something
end

Example:

# good

if some_var == true
  do_something
end

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a space in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: false

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

This cop (by default) checks for uses of the lambda literal syntax for single line lambdas, and the method call syntax for multiline lambdas. It is configurable to enforce one of the styles for both single line and multiline lambdas as well.

Example: EnforcedStyle: linecountdependent (default)

# bad
f = lambda { |x| x }
f = ->(x) do
      x
    end

# good
f = ->(x) { x }
f = lambda do |x|
      x
    end

Example: EnforcedStyle: lambda

# bad
f = ->(x) { x }
f = ->(x) do
      x
    end

# good
f = lambda { |x| x }
f = lambda do |x|
      x
    end

Example: EnforcedStyle: literal

# bad
f = lambda { |x| x }
f = lambda do |x|
      x
    end

# good
f = ->(x) { x }
f = ->(x) do
      x
    end

This cops checks the indentation of hanging closing parentheses in method calls, method definitions, and grouped expressions. A hanging closing parenthesis means ) preceded by a line break.

Example:

# bad
some_method(
  a,
  b
  )

some_method(
  a, b
  )

some_method(a, b, c
  )

some_method(a,
            b,
            c
  )

some_method(a,
  x: 1,
  y: 2
  )

# Scenario 1: When First Parameter Is On Its Own Line

# good: when first param is on a new line, right paren is *always*
#       outdented by IndentationWidth
some_method(
  a,
  b
)

# good
some_method(
  a, b
)

# Scenario 2: When First Parameter Is On The Same Line

# good: when all other params are also on the same line, outdent
#       right paren by IndentationWidth
some_method(a, b, c
           )

# good: when all other params are on multiple lines, but are lined
#       up, align right paren with left paren
some_method(a,
            b,
            c
           )

# good: when other params are not lined up on multiple lines, outdent
#       right paren by IndentationWidth
some_method(a,
  x: 1,
  y: 2
)

Use a guard clause instead of wrapping the code inside a conditional expression

Example:

# bad
def test
  if something
    work
  end
end

# good
def test
  return unless something
  work
end

# also good
def test
  work if something
end

# bad
if something
  raise 'exception'
else
  ok
end

# good
raise 'exception' if something
ok

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

This cop checks the length of lines in the source code. The maximum length is configurable. The tab size is configured in the IndentationWidth of the Layout/Tab cop.

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

Checks for comma (,) preceded by space.

Example:

# bad
[1 , 2 , 3]
a(1 , 2)
each { |a , b| }

# good
[1, 2, 3]
a(1, 2)
each { |a, b| }

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

This cop checks whether comments have a leading space after the # denoting the start of the comment. The leading space is not required for some RDoc special syntax, like #++, #--, #:nodoc, =begin- and =end comments, "shebang" directives, or rackup options.

Example:

# bad
#Some comment

# good
# Some comment

This cop checks the length of lines in the source code. The maximum length is configurable. The tab size is configured in the IndentationWidth of the Layout/Tab cop.

Checks for comma (,) preceded by space.

Example:

# bad
[1 , 2 , 3]
a(1 , 2)
each { |a , b| }

# good
[1, 2, 3]
a(1, 2)
each { |a, b| }

This cop checks for unused method arguments.

Example:

# bad

def some_method(used, unused, _unused_but_allowed)
  puts used
end

Example:

# good

def some_method(used, _unused, _unused_but_allowed)
  puts used
end

This cop checks for missing top-level documentation of classes and modules. Classes with no body are exempt from the check and so are namespace modules - modules that have nothing in their bodies except classes, other modules, or constant definitions.

The documentation requirement is annulled if the class or module has a "#:nodoc:" comment next to it. Likewise, "#:nodoc: all" does the same for all its children.

Example:

# bad
class Person
  # ...
end

# good
# Description/Explanation of Person class
class Person
  # ...
end

This cop checks whether comments have a leading space after the # denoting the start of the comment. The leading space is not required for some RDoc special syntax, like #++, #--, #:nodoc, =begin- and =end comments, "shebang" directives, or rackup options.

Example:

# bad
#Some comment

# good
# Some comment

Checks that the equals signs in parameter default assignments have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space (default)

# bad
def some_method(arg1=:default, arg2=nil, arg3=[])
  # do something...
end

# good
def some_method(arg1 = :default, arg2 = nil, arg3 = [])
  # do something...
end

Example: EnforcedStyle: no_space

# bad
def some_method(arg1 = :default, arg2 = nil, arg3 = [])
  # do something...
end

# good
def some_method(arg1=:default, arg2=nil, arg3=[])
  # do something...
end

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:

- key (left align keys)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)

The treatment of hashes passed as the last argument to a method call can also be configured. The options are:

- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
- ignore_explicit (with curly braces)

Example: EnforcedHashRocketStyle: key (default)

# bad
{
  :foo => bar,
   :ba => baz
}

# good
{
  :foo => bar,
  :ba => baz
}

Example: EnforcedHashRocketStyle: separator

# bad
{
  :foo => bar,
  :ba => baz
}
{
  :foo => bar,
  :ba  => baz
}

# good
{
  :foo => bar,
   :ba => baz
}

Example: EnforcedHashRocketStyle: table

# bad
{
  :foo => bar,
   :ba => baz
}

# good
{
  :foo => bar,
  :ba  => baz
}

Example: EnforcedColonStyle: key (default)

# bad
{
  foo: bar,
   ba: baz
}

# good
{
  foo: bar,
  ba: baz
}

Example: EnforcedColonStyle: separator

# bad
{
  foo: bar,
  ba: baz
}

# good
{
  foo: bar,
   ba: baz
}

Example: EnforcedColonStyle: table

# bad
{
  foo: bar,
  ba: baz
}

# good
{
  foo: bar,
  ba:  baz
}

Example: EnforcedLastArgumentHashStyle: always_inspect (default)

# Inspect both implicit and explicit hashes.

# bad
do_something(foo: 1,
  bar: 2)

# bad
do_something({foo: 1,
  bar: 2})

# good
do_something(foo: 1,
             bar: 2)

# good
do_something(
  foo: 1,
  bar: 2
)

# good
do_something({foo: 1,
              bar: 2})

# good
do_something({
  foo: 1,
  bar: 2
})

Example: EnforcedLastArgumentHashStyle: always_ignore

# Ignore both implicit and explicit hashes.

# good
do_something(foo: 1,
  bar: 2)

# good
do_something({foo: 1,
  bar: 2})

Example: EnforcedLastArgumentHashStyle: ignore_implicit

# Ignore only implicit hashes.

# bad
do_something({foo: 1,
  bar: 2})

# good
do_something(foo: 1,
  bar: 2)

Example: EnforcedLastArgumentHashStyle: ignore_explicit

# Ignore only explicit hashes.

# bad
do_something(foo: 1,
  bar: 2)

# good
do_something({foo: 1,
  bar: 2})

This cop checks whether comments have a leading space after the # denoting the start of the comment. The leading space is not required for some RDoc special syntax, like #++, #--, #:nodoc, =begin- and =end comments, "shebang" directives, or rackup options.

Example:

# bad
#Some comment

# good
# Some comment

Checks for comma (,) not followed by some kind of space.

Example:

# bad
[1,2]
{ foo:bar,}

# good
[1, 2]
{ foo:bar, }

Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:

- key (left align keys)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)

The treatment of hashes passed as the last argument to a method call can also be configured. The options are:

- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
- ignore_explicit (with curly braces)

Example: EnforcedHashRocketStyle: key (default)

# bad
{
  :foo => bar,
   :ba => baz
}

# good
{
  :foo => bar,
  :ba => baz
}

Example: EnforcedHashRocketStyle: separator

# bad
{
  :foo => bar,
  :ba => baz
}
{
  :foo => bar,
  :ba  => baz
}

# good
{
  :foo => bar,
   :ba => baz
}

Example: EnforcedHashRocketStyle: table

# bad
{
  :foo => bar,
   :ba => baz
}

# good
{
  :foo => bar,
  :ba  => baz
}

Example: EnforcedColonStyle: key (default)

# bad
{
  foo: bar,
   ba: baz
}

# good
{
  foo: bar,
  ba: baz
}

Example: EnforcedColonStyle: separator

# bad
{
  foo: bar,
  ba: baz
}

# good
{
  foo: bar,
   ba: baz
}

Example: EnforcedColonStyle: table

# bad
{
  foo: bar,
  ba: baz
}

# good
{
  foo: bar,
  ba:  baz
}

Example: EnforcedLastArgumentHashStyle: always_inspect (default)

# Inspect both implicit and explicit hashes.

# bad
do_something(foo: 1,
  bar: 2)

# bad
do_something({foo: 1,
  bar: 2})

# good
do_something(foo: 1,
             bar: 2)

# good
do_something(
  foo: 1,
  bar: 2
)

# good
do_something({foo: 1,
              bar: 2})

# good
do_something({
  foo: 1,
  bar: 2
})

Example: EnforcedLastArgumentHashStyle: always_ignore

# Ignore both implicit and explicit hashes.

# good
do_something(foo: 1,
  bar: 2)

# good
do_something({foo: 1,
  bar: 2})

Example: EnforcedLastArgumentHashStyle: ignore_implicit

# Ignore only implicit hashes.

# bad
do_something({foo: 1,
  bar: 2})

# good
do_something(foo: 1,
  bar: 2)

Example: EnforcedLastArgumentHashStyle: ignore_explicit

# Ignore only explicit hashes.

# bad
do_something(foo: 1,
  bar: 2)

# good
do_something({foo: 1,
  bar: 2})

Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:

- key (left align keys)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)

The treatment of hashes passed as the last argument to a method call can also be configured. The options are:

- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
- ignore_explicit (with curly braces)

Example: EnforcedHashRocketStyle: key (default)

# bad
{
  :foo => bar,
   :ba => baz
}

# good
{
  :foo => bar,
  :ba => baz
}

Example: EnforcedHashRocketStyle: separator

# bad
{
  :foo => bar,
  :ba => baz
}
{
  :foo => bar,
  :ba  => baz
}

# good
{
  :foo => bar,
   :ba => baz
}

Example: EnforcedHashRocketStyle: table

# bad
{
  :foo => bar,
   :ba => baz
}

# good
{
  :foo => bar,
  :ba  => baz
}

Example: EnforcedColonStyle: key (default)

# bad
{
  foo: bar,
   ba: baz
}

# good
{
  foo: bar,
  ba: baz
}

Example: EnforcedColonStyle: separator

# bad
{
  foo: bar,
  ba: baz
}

# good
{
  foo: bar,
   ba: baz
}

Example: EnforcedColonStyle: table

# bad
{
  foo: bar,
  ba: baz
}

# good
{
  foo: bar,
  ba:  baz
}

Example: EnforcedLastArgumentHashStyle: always_inspect (default)

# Inspect both implicit and explicit hashes.

# bad
do_something(foo: 1,
  bar: 2)

# bad
do_something({foo: 1,
  bar: 2})

# good
do_something(foo: 1,
             bar: 2)

# good
do_something(
  foo: 1,
  bar: 2
)

# good
do_something({foo: 1,
              bar: 2})

# good
do_something({
  foo: 1,
  bar: 2
})

Example: EnforcedLastArgumentHashStyle: always_ignore

# Ignore both implicit and explicit hashes.

# good
do_something(foo: 1,
  bar: 2)

# good
do_something({foo: 1,
  bar: 2})

Example: EnforcedLastArgumentHashStyle: ignore_implicit

# Ignore only implicit hashes.

# bad
do_something({foo: 1,
  bar: 2})

# good
do_something(foo: 1,
  bar: 2)

Example: EnforcedLastArgumentHashStyle: ignore_explicit

# Ignore only explicit hashes.

# bad
do_something(foo: 1,
  bar: 2)

# good
do_something({foo: 1,
  bar: 2})

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end