Mass assignment is a feature of Rails which allows an application to create a record from the values of a hash.

Example:

User.new(params[:user])

Unfortunately, if there is a user field called admin which controls administrator access, now any user can make themselves an administrator.

attr_accessible and attr_protected can be used to limit mass assignment. However, Brakeman will warn unless attr_accessible is used, or mass assignment is completely disabled.

There are two different mass assignment warnings which can arise. The first is when mass assignment actually occurs, such as the example above. This results in a warning like

Unprotected mass assignment near line 61: User.new(params[:user])

The other warning is raised whenever a model is found which does not use attr_accessible. This produces generic warnings like

Mass assignment is not restricted using attr_accessible

with a list of affected models.

In Rails 3.1 and newer, mass assignment can easily be disabled:

config.active_record.whitelist_attributes = true

Unfortunately, it can also easily be bypassed:

User.new(params[:user], :without_protection => true)

Brakeman will warn on uses of without_protection.

This cop checks if the length a class exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.

This cop checks if the length of a method exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

• Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
• Code is considered more complex for each "break in the linear flow of the code"
• Code is considered more complex when "flow breaking structures are nested"

Further reading

• Cognitive Complexity docs
• Cognitive Complexity: A new way of measuring understandability

This cop checks that the ABC size of methods is not higher than the configured maximum. The ABC size is based on assignments, branches (method calls), and conditions. See http://c2.com/cgi/wiki?AbcMetric and https://en.wikipedia.org/wiki/ABC_Software_Metric.

Flog calculates the ABC score for methods. The ABC score is based on assignments, branches (method calls), and conditions.

You can read more about ABC metrics or the flog tool

This cop checks if the length of a method exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.

This cop checks that the cyclomatic complexity of methods is not higher than the configured maximum. The cyclomatic complexity is the number of linearly independent paths through a method. The algorithm counts decision points and adds one.

An if statement (or unless or ?:) increases the complexity by one. An else branch does not, since it doesn't add a decision point. The && operator (or keyword and) can be converted to a nested if statement, and ||/or is shorthand for a sequence of ifs, so they also add one. Loops can be said to have an exit condition, so they add one.

This cop tries to produce a complexity score that's a measure of the complexity the reader experiences when looking at a method. For that reason it considers when nodes as something that doesn't add as much complexity as an if or a &&. Except if it's one of those special case/when constructs where there's no expression after case. Then the cop treats it as an if/elsif/elsif... and lets all the when nodes count. In contrast to the CyclomaticComplexity cop, this cop considers else nodes as adding complexity.

Example:

def my_method                   # 1
  if cond                       # 1
    case var                    # 2 (0.8 + 4 * 0.2, rounded)
    when 1 then func_one
    when 2 then func_two
    when 3 then func_three
    when 4..10 then func_other
    end
  else                          # 1
    do_something until a && b   # 2
  end                           # ===
end                             # 7 complexity points

This cop checks if the length of a method exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.

This cop checks if the length of a method exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.

This cop checks if the length of a method exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.

This cop checks if the length of a method exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.

This cop checks if the length of a method exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.

This cop checks that the ABC size of methods is not higher than the configured maximum. The ABC size is based on assignments, branches (method calls), and conditions. See http://c2.com/cgi/wiki?AbcMetric and https://en.wikipedia.org/wiki/ABC_Software_Metric.

This cop checks that the ABC size of methods is not higher than the configured maximum. The ABC size is based on assignments, branches (method calls), and conditions. See http://c2.com/cgi/wiki?AbcMetric and https://en.wikipedia.org/wiki/ABC_Software_Metric.

Boolean Parameter is a special case of Control Couple, where a method parameter is defaulted to true or false. A Boolean Parameter effectively permits a method's caller to decide which execution path to take. This is a case of bad cohesion. You're creating a dependency between methods that is not really necessary, thus increasing coupling.

Example

Given

class Dummy
  def hit_the_switch(switch = true)
    if switch
      puts 'Hitting the switch'
      # do other things...
    else
      puts 'Not hitting the switch'
      # do other things...
    end
  end
end

Reek would emit the following warning:

test.rb -- 3 warnings:
  [1]:Dummy#hit_the_switch has boolean parameter 'switch' (BooleanParameter)
  [2]:Dummy#hit_the_switch is controlled by argument switch (ControlParameter)

Note that both smells are reported, Boolean Parameter and Control Parameter.

Getting rid of the smell

This is highly dependent on your exact architecture, but looking at the example above what you could do is:

• Move everything in the if branch into a separate method
• Move everything in the else branch into a separate method
• Get rid of the hit_the_switch method alltogether
• Make the decision what method to call in the initial caller of hit_the_switch

A method with Too Many Statements is any method that has a large number of lines.

Too Many Statements warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements counts +1 for every simple statement in a method and +1 for every statement within a control structure (if, else, case, when, for, while, until, begin, rescue) but it doesn't count the control structure itself.

So the following method would score +6 in Reek's statement-counting algorithm:

def parse(arg, argv, &error)
  if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
    return nil, block, nil                                         # +1
  end
  opt = (val = parse_arg(val, &error))[1]                          # +2
  val = conv_arg(*val)                                             # +3
  if opt and !arg
    argv.shift                                                     # +4
  else
    val[0] = nil                                                   # +5
  end
  val                                                              # +6
end

(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)

A method with Too Many Statements is any method that has a large number of lines.

Too Many Statements warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements counts +1 for every simple statement in a method and +1 for every statement within a control structure (if, else, case, when, for, while, until, begin, rescue) but it doesn't count the control structure itself.

So the following method would score +6 in Reek's statement-counting algorithm:

def parse(arg, argv, &error)
  if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
    return nil, block, nil                                         # +1
  end
  opt = (val = parse_arg(val, &error))[1]                          # +2
  val = conv_arg(*val)                                             # +3
  if opt and !arg
    argv.shift                                                     # +4
  else
    val[0] = nil                                                   # +5
  end
  val                                                              # +6
end

(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)

Boolean Parameter is a special case of Control Couple, where a method parameter is defaulted to true or false. A Boolean Parameter effectively permits a method's caller to decide which execution path to take. This is a case of bad cohesion. You're creating a dependency between methods that is not really necessary, thus increasing coupling.

Example

Given

class Dummy
  def hit_the_switch(switch = true)
    if switch
      puts 'Hitting the switch'
      # do other things...
    else
      puts 'Not hitting the switch'
      # do other things...
    end
  end
end

Reek would emit the following warning:

test.rb -- 3 warnings:
  [1]:Dummy#hit_the_switch has boolean parameter 'switch' (BooleanParameter)
  [2]:Dummy#hit_the_switch is controlled by argument switch (ControlParameter)

Note that both smells are reported, Boolean Parameter and Control Parameter.

Getting rid of the smell

This is highly dependent on your exact architecture, but looking at the example above what you could do is:

• Move everything in the if branch into a separate method
• Move everything in the else branch into a separate method
• Get rid of the hit_the_switch method alltogether
• Make the decision what method to call in the initial caller of hit_the_switch

A method with Too Many Statements is any method that has a large number of lines.

Too Many Statements warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements counts +1 for every simple statement in a method and +1 for every statement within a control structure (if, else, case, when, for, while, until, begin, rescue) but it doesn't count the control structure itself.

So the following method would score +6 in Reek's statement-counting algorithm:

def parse(arg, argv, &error)
  if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
    return nil, block, nil                                         # +1
  end
  opt = (val = parse_arg(val, &error))[1]                          # +2
  val = conv_arg(*val)                                             # +3
  if opt and !arg
    argv.shift                                                     # +4
  else
    val[0] = nil                                                   # +5
  end
  val                                                              # +6
end

(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)

A method with Too Many Statements is any method that has a large number of lines.

Too Many Statements warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements counts +1 for every simple statement in a method and +1 for every statement within a control structure (if, else, case, when, for, while, until, begin, rescue) but it doesn't count the control structure itself.

So the following method would score +6 in Reek's statement-counting algorithm:

def parse(arg, argv, &error)
  if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
    return nil, block, nil                                         # +1
  end
  opt = (val = parse_arg(val, &error))[1]                          # +2
  val = conv_arg(*val)                                             # +3
  if opt and !arg
    argv.shift                                                     # +4
  else
    val[0] = nil                                                   # +5
  end
  val                                                              # +6
end

(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Classes and modules are the units of reuse and release. It is therefore considered good practice to annotate every class and module with a brief comment outlining its responsibilities.

Example

Given

class Dummy
  # Do things...
end

Reek would emit the following warning:

test.rb -- 1 warning:
  [1]:Dummy has no descriptive comment (IrresponsibleModule)

Fixing this is simple - just an explaining comment:

# The Dummy class is responsible for ...
class Dummy
  # Do things...
end

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Classes should not assume that instance variables are set or present outside of the current class definition.

Good:

class Foo
  def initialize
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Good as well:

class Foo
  def foo?
    bar == :foo
  end

  def bar
    @bar ||= :foo
  end
end

Bad:

class Foo
  def go_foo!
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Example

Running Reek on:

class Dummy
  def test
    @ivar
  end
end

would report:

[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar

Note that this example would trigger this smell warning as well:

class Parent
  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    @omg
  end
end

The way to address the smell warning is that you should create an attr_reader to use @omg in the subclass and not access @omg directly like this:

class Parent
  attr_reader :omg

  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    omg
  end
end

Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.

If you don't want to expose those methods as public API just make them private like this:

class Parent
  def initialize(omg)
    @omg = omg
  end

  private
  attr_reader :omg
end

class Child < Parent
  def foo
    omg
  end
end

Current Support in Reek

An instance variable must:

• be set in the constructor
• or be accessed through a method with lazy initialization / memoization.

If not, Instance Variable Assumption will be reported.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Classes should not assume that instance variables are set or present outside of the current class definition.

Good:

class Foo
  def initialize
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Good as well:

class Foo
  def foo?
    bar == :foo
  end

  def bar
    @bar ||= :foo
  end
end

Bad:

class Foo
  def go_foo!
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Example

Running Reek on:

class Dummy
  def test
    @ivar
  end
end

would report:

[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar

Note that this example would trigger this smell warning as well:

class Parent
  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    @omg
  end
end

The way to address the smell warning is that you should create an attr_reader to use @omg in the subclass and not access @omg directly like this:

class Parent
  attr_reader :omg

  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    omg
  end
end

Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.

If you don't want to expose those methods as public API just make them private like this:

class Parent
  def initialize(omg)
    @omg = omg
  end

  private
  attr_reader :omg
end

class Child < Parent
  def foo
    omg
  end
end

Current Support in Reek

An instance variable must:

• be set in the constructor
• or be accessed through a method with lazy initialization / memoization.

If not, Instance Variable Assumption will be reported.

Flog calculates the ABC score for methods. The ABC score is based on assignments, branches (method calls), and conditions.

You can read more about ABC metrics or the flog tool

A Utility Function is any instance method that has no dependency on the state of the instance.

An Uncommunicative Variable Name is a variable name that doesn't communicate its intent well enough.

Poor names make it hard for the reader to build a mental picture of what's going on in the code. They can also be mis-interpreted; and they hurt the flow of reading, because the reader must slow down to interpret the names.

An Uncommunicative Variable Name is a variable name that doesn't communicate its intent well enough.

Poor names make it hard for the reader to build a mental picture of what's going on in the code. They can also be mis-interpreted; and they hurt the flow of reading, because the reader must slow down to interpret the names.

An Uncommunicative Variable Name is a variable name that doesn't communicate its intent well enough.

Poor names make it hard for the reader to build a mental picture of what's going on in the code. They can also be mis-interpreted; and they hurt the flow of reading, because the reader must slow down to interpret the names.

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 42.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 35.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 28.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 26.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

This cop makes sure that predicates are named properly.

Example:

# bad
def is_even(value)
end

def is_even?(value)
end

# good
def even?(value)
end

# bad
def has_value
end

def has_value?
end

# good
def value?
end

This cop checks for missing top-level documentation of classes and modules. Classes with no body are exempt from the check and so are namespace modules - modules that have nothing in their bodies except classes, other modules, or constant definitions.

The documentation requirement is annulled if the class or module has a "#:nodoc:" comment next to it. Likewise, "#:nodoc: all" does the same for all its children.

Example:

# bad
class Person
  # ...
end

# good
# Description/Explanation of Person class
class Person
  # ...
end

Use a guard clause instead of wrapping the code inside a conditional expression

Example:

# bad
def test
  if something
    work
  end
end

# good
def test
  return unless something
  work
end

# also good
def test
  work if something
end

# bad
if something
  raise 'exception'
else
  ok
end

# good
raise 'exception' if something
ok

This cop can check for array literals made up of symbols that are not using the %i() syntax.

Alternatively, it checks for symbol arrays using the %i() syntax on projects which do not want to use that syntax.

Configuration option: MinSize If set, arrays with fewer elements than this value will not trigger the cop. For example, a MinSize of3` will not enforce a style on an array of 2 or fewer elements.

Example: EnforcedStyle: percent (default)

# good
%i[foo bar baz]

# bad
[:foo, :bar, :baz]

Example: EnforcedStyle: brackets

# good
[:foo, :bar, :baz]

# bad
%i[foo bar baz]